Exact hole depth - Githubissues

ArroyoDev-LLC / 3dframe

Generate printable joints to create a real puzzle from any 3d model.

MIT License

1 stars 0 forks source link

Exact hole depth #5

Closed arroyoDev closed 3 years ago

arroyoDev commented 3 years ago

In order to mark the depth point (with a notch that can also be used for with the #2 gripper) all holes need to be the exact same depth. They currently vary by at least 1/8 of an inch.

[ ] The Depth should be 2x the dowel thickness
[ ] 3/4" dowels = 1.5" deep
[ ] 1/2" dowels = 1" deep
[ ] 1/4" dowels = .5" deep

arroyoDev commented 3 years ago

on the last batch of .stl files you just loaded today 6/25/21 looking down the hole you can se the core structure. I think this may be the source of small inconsistencies in depth. just a thought.

arroyoDev commented 3 years ago

Awesome. I will check out on the next batch of .stls.. no rush..