ArveVM / MyAssistedHome

HomeAssistant, selfhosting (unRaid, Dockers) and other stuff
24 stars 2 forks source link

cheap PoE-cam #37

Closed ArveVM closed 1 year ago

ArveVM commented 1 year ago

test cheap PoE-cam for garage,, might be better to use a super-cheap PoE than to use wifi ??

5MP POE 48V, 2.8mm https://www.aliexpress.com/item/1005005431333182.html image

331.06 NOK

ArveVM commented 1 year ago

WARNING!! Absolutely no info in the package, no product name, no manual, no qr-code to scan to get to website,, nothing ;) felt like Sherlock Holmes trying to get to the login (which was admin:123456 )

and to get the right IP (it was setup with fixed IP so was outside my normal ranges so had to create a dummy-range to get into the web-interface in the first-place - but then assigning to dhcp and remove the cloud stuff was basic setup..

tested the cam against a reolink RLC810A (three times the price),,

tested the cam against a D-Link DCS-8302LH (wifi) (double the price),,

placeholder until proper doc's:

login admin:123456

go2rtc_
  streams:
    simi:                 # cheap AliExpress-cam :)
      - rtsp://user:pwd@camIP:554/stream1
    simi_sub:
      - rtsp://user:pwd@camIP:554/0

tutorial on 'similar' (?) cam (other cheal ali-cam that seems to have same web-interface): https://www.youtube.com/watch?v=CEPLblN20Ac

ArveVM commented 1 year ago

finally got an answer by email from the SimiCam support-team on the lack of user guide (asked for it during the frustrating time of not getting into the web-interface,,, the answer is as follows:

fre. 16. juni 2023 kl. 02:53 skrev ChocieService <ChocieService@aliexpress.com>:
Dear customer,

Thanks for contacting us.

You can see this link to see on how to use the item.

Youtube link: https://www.youtube.com/watch?v=YNIN8JaePNk

Any further question or requirement, please let us know.

Thanks for your understanding and patience.

so the official manual and instructions for the camera's web-interface for settings to connect to rtsp-stream is in fact a link to an user-generated review of another brand camera with their NVR/app :)

I repeat the warning - - little documentation exist on this,, be prepared to tinker ;)

ArveVM commented 1 year ago

setup procedure:

  1. Reconfigure poe-switch-port to simicam-vlan (192.168.1.x) with POE
  2. connect camera to port
  3. connect pc to same vlan
  4. check UDMP for IP on cam,,
  5. use pc to connect to web-interface of camera (use IP)
  6. Reconfigure
    • all the cloud stuff,,
    • sntp to ntp.local
    • dns to unraid-ip
    • network enable DHCP
    • mainstream to H264
    • substream to H264 640*360, 5fps
    • disable audio
  7. save all and reboot
  8. reconfigure vlan on port to NoT
  9. check UDMP for new IP, set fixed IP
  10. configure Frigate/go2rtc