【环境】
toolkit版本:
runtime_running_version=[1.84.15.1.310:6.0.1]
compiler_running_version=[1.84.15.1.310:6.0.1]
opp_running_version=[1.84.15.1.310:6.0.1]
toolkit_running_version=[1.84.15.1.310:6.0.1]
aoe_running_version=[1.84.15.1.310:6.0.1]
ncs_running_version=[1.84.15.1.310:6.0.1]
runtime_upgrade_version=[1.84.15.1.310:6.0.1]
compiler_upgrade_version=[1.84.15.1.310:6.0.1]
opp_upgrade_version=[1.84.15.1.310:6.0.1]
toolkit_upgrade_version=[1.84.15.1.310:6.0.1]
aoe_upgrade_version=[1.84.15.1.310:6.0.1]
ncs_upgrade_version=[1.84.15.1.310:6.0.1]
runtime_installed_version=[1.84.15.1.310:6.0.1]
compiler_installed_version=[1.84.15.1.310:6.0.1]
opp_installed_version=[1.84.15.1.310:6.0.1]
toolkit_installed_version=[1.84.15.1.310:6.0.1]
aoe_installed_version=[1.84.15.1.310:6.0.1]
ncs_installed_version=[1.84.15.1.310:6.0.1]
驱动版本:23.0.rc2.b020
芯片:310P3
问题描述:
按照samples/cplusplus/level1_single_api/4_op_dev/2_verify_op/acl_execute_add/README_CN.md设置好所有环境变量。
在目录samples/cplusplus/level1_single_api/4_op_dev/2_verify_op/acl_execute_add/run/out下运行生成算子的命令:atc --singleop=test_data/config/add_op.json --soc_version=Ascend310P3 --output=op_models
生成算子失败,报错信息如下:
ATC start working now, please wait for a moment.
ATC run failed, Please check the detail log, Try 'atc --help' for more information
EZ3003: No supported Ops kernel and engine are found for [AddDsl], optype [AddDsl].
Possible Cause: The operator is not supported by the system. Therefore, no hit is found in any operator information library.
Solution: 1. Check that the OPP component is installed properly. 2. Submit an issue to request for the support of this operator type.
TraceBack (most recent call last):
build graph failed, graph id:0, ret:-1[FUNC:BuildModel][FILE:ge_generator.cc][LINE:148
【环境】 toolkit版本: runtime_running_version=[1.84.15.1.310:6.0.1] compiler_running_version=[1.84.15.1.310:6.0.1] opp_running_version=[1.84.15.1.310:6.0.1] toolkit_running_version=[1.84.15.1.310:6.0.1] aoe_running_version=[1.84.15.1.310:6.0.1] ncs_running_version=[1.84.15.1.310:6.0.1] runtime_upgrade_version=[1.84.15.1.310:6.0.1] compiler_upgrade_version=[1.84.15.1.310:6.0.1] opp_upgrade_version=[1.84.15.1.310:6.0.1] toolkit_upgrade_version=[1.84.15.1.310:6.0.1] aoe_upgrade_version=[1.84.15.1.310:6.0.1] ncs_upgrade_version=[1.84.15.1.310:6.0.1] runtime_installed_version=[1.84.15.1.310:6.0.1] compiler_installed_version=[1.84.15.1.310:6.0.1] opp_installed_version=[1.84.15.1.310:6.0.1] toolkit_installed_version=[1.84.15.1.310:6.0.1] aoe_installed_version=[1.84.15.1.310:6.0.1] ncs_installed_version=[1.84.15.1.310:6.0.1] 驱动版本:23.0.rc2.b020 芯片:310P3 问题描述: 按照samples/cplusplus/level1_single_api/4_op_dev/2_verify_op/acl_execute_add/README_CN.md设置好所有环境变量。 在目录samples/cplusplus/level1_single_api/4_op_dev/2_verify_op/acl_execute_add/run/out下运行生成算子的命令:atc --singleop=test_data/config/add_op.json --soc_version=Ascend310P3 --output=op_models 生成算子失败,报错信息如下: ATC start working now, please wait for a moment. ATC run failed, Please check the detail log, Try 'atc --help' for more information EZ3003: No supported Ops kernel and engine are found for [AddDsl], optype [AddDsl]. Possible Cause: The operator is not supported by the system. Therefore, no hit is found in any operator information library. Solution: 1. Check that the OPP component is installed properly. 2. Submit an issue to request for the support of this operator type. TraceBack (most recent call last): build graph failed, graph id:0, ret:-1[FUNC:BuildModel][FILE:ge_generator.cc][LINE:148