search

Atmosphere-NX / Atmosphere

Atmosphère is a work-in-progress customized firmware for the Nintendo Switch.
GNU General Public License v2.0
14.41k stars 1.21k forks source link

Black Screen only when booting stock #895

Closed ollidiemaus closed 4 years ago

ollidiemaus commented 4 years ago

Bug Report

What's the issue you encountered?

When I try to boot Stock sysNand using hekate 5.1.4 with this config:

[OFW Stock]
fss0=atmosphere/fusee-secondary.bin
stock=1
emummc_force_disable=1

First the SEPT Splash Screen appears then I get a black screen. But when I'm booting sysNand with atmosphere everything works just fine. Also emuMMC is booting fine as always.

How can the issue be reproduced?

I just copy paste the atmosphere, sept and switch folder from release 0.11.1 to the SD Card. Also I copy bootloader from hekate 5.1.4 to the SD Card. Then I copy the latest fusee-primary in the atmosphere folder.

Crash Report

There are sadly no Crash Reports.

System Firmware Version

10.0

Environment?

Additional context?

N/A

SciresM commented 4 years ago

I have no idea what "stock sysnand" means, but I suspect it isn't something that atmosphere actually supports.

ollidiemaus commented 4 years ago

Before the Update I could boot without atmosphere just the stock operating system but with the different bootloader to not burn fuses. Maybe I'm wrong and this is not an atmosphere issue but a bootloader issue then I have to search there...

victormr21 commented 4 years ago

I have no idea what "stock sysnand" means, but I suspect it isn't something that atmosphere actually supports.

He means HOS in OFW, without Homebrew. I also suffer this problem. I fixed it disabling AutoRCM but I guess that's a temporary solution. And if I'm not wrong CTCaer said that above 7.0.0 you need Exosphere in order to boot Stock sysNAND

Alfie-Mills commented 4 years ago

Yeah, I'm also experiencing this issue. I returned to the switch after a few months, wiped my sd as exfat and installed the latest atmosphere. Everything works fine. Install switch 10.0 update, reboot, and black screen.

Alfie-Mills commented 4 years ago

Also, I am unable to boot CFW even with AutoRCM disabled. hekate 5.1.4 is working

Kev63 commented 4 years ago

I have the exact same issue. Atmosphere works fine, but not stock original firmware. I downgraded to 9.2.0 with ChoixduJourNX and I will stay in this firmware for now.

Alfie-Mills commented 4 years ago

I have the exact same issue. Atmosphere works fine, but not stock original firmware. I downgraded to 9.2.0 with ChoixduJourNX and I will stay in this firmware for now.

Sorry, how did you downgrade as I'd be very interested in that.

Kev63 commented 4 years ago

Using ChoixduJourNX homebrew, but to do so, you have to check if you didn't burn the fuses, otherwise you will brick your Switch. You can check if you burnt them in Hekate, then Console Info, then Fuses, then the orange line Burnt Fuses.

Alfie-Mills commented 4 years ago

I don't have any orange lines or anything, it just says this:

SKU: 83 - Retail Sdram ID:0 Burnt fuses: 13/64

ghost commented 4 years ago

my said this Burnt Fuses (0DM7/6): 13-0. what does it mean ?

shchmue commented 4 years ago

Using ChoixduJourNX homebrew, but to do so, you have to check if you didn't burn the fuses, otherwise you will brick your Switch. You can check if you burnt them in Hekate, then Console Info, then Fuses, then the orange line Burnt Fuses.

this is total misinformation. whenever you boot the console via RCM, fuse checks are skipped. the only way to brick your switch like this is by enable autorcm on a PATCHED console, which is blocked by all the current programs used that are able to enable autorcm. if your console is on a firmware below your fuse level, and you boot stock, without RCM, the console will not boot. but you can still boot via RCM

SciresM commented 4 years ago

This is not an atmosphere problem.