search

Audio-Injector / Octo

Octo sound card - 8 channel output and 6 channel input sound cards
39 stars 3 forks source link

rpi 5 - setup problem #68

Open clubwalk opened 1 month ago

clubwalk commented 1 month ago

hello, i try to setup the octo for a week now and i can't make it works. i'm on a rpi 5 and using the 3A power supply.

iam@raspberrypi:~$ uname -a Linux raspberrypi 6.6.56-v8-16k+ #1804 SMP PREEMPT Thu Oct 10 18:24:46 BST 2024 aarch64 GNU/Linux liam@raspberrypi:~$ sudo dpkg -i Downloads/audioinjector.octo.setup_0.4_all.deb (Reading database ... 151969 files and directories currently installed.) Preparing to unpack .../audioinjector.octo.setup_0.4_all.deb ... Unpacking audioinjector.octo.setup (0.4) over (0.4) ... Setting up audioinjector.octo.setup (0.4) ... updating the kernel *** Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS and Dom *** Performing self-update *** Relaunching after update *** Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS and Dom FW_REV:84e180662bc3f6646860a328d328a38d58325c8a BOOTLOADER_REV:3c822369bec71a2f10514994b6f491d8e2323f9e *** Your firmware is already up to date (delete /boot/firmware/.firmware_revision and /boot/firmware/.bootloader_revision to force an update anyway) setting up /boot/config.txt backing up /boot/config.txt to /boot/config.txt.2024-10-14.13.18.13 setting up /boot/config.txt backing up /etc/asound.conf to /etc/asound.conf.2024-10-14.13.18.13 backing up /root/.asoundrc to /root/.asoundrc.2024-10-14.13.18.13 backing up /home/pi/.asoundrc to /home/pi/.asoundrc.2024-10-14.13.18.13 /var/lib/dpkg/info/audioinjector.octo.setup.postinst: 85: cannot create ~pi/.asoundrc: Directory nonexistent dpkg: error processing package audioinjector.octo.setup (--install): installed audioinjector.octo.setup package post-installation script subprocess returned error exit status 2 Errors were encountered while processing: audioinjector.octo.setup liam@raspberrypi:~$ thx by advance

clubwalk commented 1 month ago

update : after erasing and imaging my rpi's sd, the setup was done without errors but the octo still not detected.

clubwalk commented 1 month ago

went back to my 3b+, kernel 5.15.65-v8+, got all outputs working without noise. hope this lil bud will handle my project.