Open tolis-sk opened 8 months ago
I need a bit more help than just it doesn't work! Use the gpio std last release firmware with the ini provided for the TS project.
On Fri, 13 Oct 2023, 18:17 tolis-sk, @.***> wrote:
I try to connect the speeduino v0.3 with and Arduino mega thru serial3.
Any firmware and possible way and I can't make it work.
Can you help me? Do you have any video upload?
Thanks in advance
— Reply to this email directly, view it on GitHub https://github.com/Autohome2/dxControl-GPIO/issues/2, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACXTBWE2W66CLH6QULXRKWDX7FZTXANCNFSM6AAAAAA57OI3YE . You are receiving this because you are subscribed to this thread.Message ID: @.***>
Thank you for the quick response. I can't figure out the whole address think to make them communicate.
Have you setup the TS project ? Which firmware did you use?
On Fri, 13 Oct 2023, 18:46 tolis-sk, @.***> wrote:
Thank you for the quick response. I can't figure out the whole address think to make the communicate.
— Reply to this email directly, view it on GitHub https://github.com/Autohome2/dxControl-GPIO/issues/2#issuecomment-1761937599, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACXTBWAXILSTCSVM5MQRBLDX7F453ANCNFSM6AAAAAA57OI3YE . You are receiving this because you commented.Message ID: @.***>
Ι use the final speeduino version and the gpio-STD version. I am able to connect thru tuner studio in both of them. But a can't get them communicate together.
First ensure you have the serial3 to serial3 connections correct (and crossed over).
BUT your main issue will be that in the last speeduino firmware release the secondary serial was broken ! There is a fix under way being tested , but it's still WIP.
On Sat, 14 Oct 2023, 12:37 tolis-sk, @.***> wrote:
Ι use the final speeduino version and the gpio-STD version. I am able to connect thru tuner studio in both of the. But a can't get them communicate together.
— Reply to this email directly, view it on GitHub https://github.com/Autohome2/dxControl-GPIO/issues/2#issuecomment-1762848790, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACXTBWFYJTK2AK2RDNFUZXLX7J2OPANCNFSM6AAAAAA57OI3YE . You are receiving this because you commented.Message ID: @.***>
I have installed 202305
So will wait for a new release.
Thank you
Dear Autohome2,
I still can figure out how to make them work
Hi The fix to the secondary serial in the speeduino firmware is now apparently working ok and will be included in the next firmware update , I don't know when josh is going to make that release at the moment.
On Wed, 17 Jan 2024, 16:08 tolis-sk, @.***> wrote:
Dear Autohome2,
I still can figure out how to make them work
— Reply to this email directly, view it on GitHub https://github.com/Autohome2/dxControl-GPIO/issues/2#issuecomment-1896126586, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACXTBWD3YFWVDEUBTIDP5HDYO7ZOFAVCNFSM6AAAAAA57OI3YGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQOJWGEZDMNJYGY . You are receiving this because you commented.Message ID: @.***>
I try to connect the speeduino v0.3 with and Arduino mega thru serial3.
Any firmware and possible way and I can't make it work.
Can you help me? Do you have any video upload?
Thanks in advance