search

AuxXxilium / arc

Arc is a customized Redpill Loader for DSM 7.x (Xpenology) with enhanced Hardwaresupport, Addons, guided (semi-automated) Installation and more. Multiple customization options are built-in. It is modified to run on different Hardware (Wiki for more Informations). Commercial use is not permitted and strictly forbidden!
https://auxxxilium.tech
GNU General Public License v3.0
2.03k stars 235 forks source link

Proxmox shutdown not working in 23.6.21e #312

Closed andreheuer closed 1 year ago

andreheuer commented 1 year ago

After setting up a new DSM VM in Proxmox with 23.6.21e, the Proxmox shutdown command does not work anymore. In version 23.5.100, it worked fine so far.

Proxmox Config

image

Sysinfo

image

(all modules are selected)

If information for further analysis are missing, I am happy to provide them.

Thank you for your effort and support!

AuxXxilium commented 1 year ago

it is possible that the qemu-qa is destroying the shutdown. it's still a beta addon.

i have other reports that it is working since 23.6.20 and not before.

please remove addon and try again.

andreheuer commented 1 year ago

I have removed the add-on and re-installed DSM. Unfortunately, shutdown is still not working.

FYI Button module was loaded:

image
AuxXxilium commented 1 year ago

please try this command in ssh: /etc/acpi/power.sh

andreheuer commented 1 year ago

Checked. After executing this command, the DSM shuts down.

AuxXxilium commented 1 year ago

it's the command that will be executed by button.ko

can you try to remove rc-core.ko in arc modules?

AuxXxilium commented 1 year ago

there is another bug. i have to look into it later.

AuxXxilium commented 1 year ago

is it possible for you to send me a serial console log after you have pressed shutdown?

andreheuer commented 1 year ago

Please find the output. Unfortunately, nothing to see. While booting the VM, the console is populated with the usual output...so the console output is working per se.

root@pve:~# qm terminal 101
starting serial terminal on interface serial0 (press Ctrl+O to exit)

As soon as I trigger the shutdown within the DSM, the log gets populated:

[  OK  ] Stopped Notify system partition error happened.
         Stopping Notify system partition error happened...
[  OK  ] Stopped Customized post-install configuration.
         Stopping Customized post-install configuration...
[  OK  ] Stopped Single Memory Channel Action.
         Stopping Single Memory Channel Action...
[  OK  ] Stopped Load Fan Modules in Kernel Project.
         Stopping Load Fan Modules in Kernel Project...
[  OK  ] Stopped Notify data volume has been repaired by drop log tree..
         Stopping Notify data volume has been repaired by drop log tree....
         Stopping Control RC power...
[  OK  ] Stopped Synology Event-based Task Scheduler Bootup Trigger.
         Stopping Synology Event-based Task Scheduler Bootup Trigger...
[  OK  ] Stopped target PostgreSQL adapter target.
[  OK  ] Stopped Syno Data Protection - Btrfs Deleted Subvolume Clean.
         Stopping Syno Data Protection - Btrfs Deleted Subvolume Clean...
[  OK  ] Stopped Synology Log bootup done.
         Stopping Synology Log bootup done...
         Stopping WS-Discovery Server...
[  OK  ] Removed slice system-serial\x2dgetty.slice.
[  OK  ] Stopped Synology Building Tasks Restore for Storage Manager.
         Stopping Synology Building Tasks Restore for Storage Manager...
[  OK  ] Stopped Support channel checker.
         Stopping Support channel checker...
[  OK  ] Stopped Software Init Led for support led v2 models.
         Stopping Software Init Led for support led v2 models...
...

So the output is working...there is just nothing that is being logged.

AuxXxilium commented 1 year ago

so the acpi button is working. is your datastore rebuilding at the moment or some other tasks doing?

the shutdown command is called, so there should not be an issue.

if you datastore isn't doing anything:

it's possible that another addon, that you have selected is blocking this. please try it without any additional addon selected, build only with the addons that will be selected by default.

andreheuer commented 1 year ago

I think you misunderstood: there is nothing logged when pressing the "Shutdown" button in Proxmox!

After a couple of minutes, I pressed the shutdown button in DSM (to check if the log is working at all - because nothing was logged) and the log is populated immediately.

So my understanding would be, the shutdown request from Proxmox does not reach DSM.

The datastore is in status "All ok".

AuxXxilium commented 1 year ago

from where was the log a message before?

andreheuer commented 1 year ago

First, I have booted the DSM. After successful boot, I have connected to the serial console.

Then I pressed the "Shutdown" button in Proxmox. And this is the output of the console:

root@pve:~# qm terminal 101
starting serial terminal on interface serial0 (press Ctrl+O to exit)

For my understanding, nothing has been logged after pressing the "Shutdown" button in Proxmox.

AuxXxilium commented 1 year ago

qm set 101 -serial0 socket

and let the console open while pressing shutdown

AuxXxilium commented 1 year ago

Please recheck with 23.6.22 or later

andreheuer commented 1 year ago

I have installed 23.6.22 and reinstalled DSM 7.1.1.

qm set 101 -serial0 socket

That´s how I added the socket.

Afterwards, I have connected to the socket terminal and pressed the shutdown button in Proxmox. The output is as follows (so no change in 23.6.22):

root@pve:~# qm set 101 -serial0 socket
update VM 101: -serial0 socket

Reboot VM to take effect of adding the (serial) socket, then

root@pve:~# qm terminal 101
starting serial terminal on interface serial0 (press Ctrl+O to exit)
AuxXxilium commented 1 year ago

there is something wrong, i asked in discord and noone else has a problem with acpi shutdown. shutdown from proxmox and powerbutton on baremetal system is working well. so without a complete serial log including boot sequence, i have no chance to find something.

andreheuer commented 1 year ago

Aahh...ok. Because you have requested above to provide the log when pressing the Shutdown button, I have not included the boot sequence. Sorry for that.

Please find the complete log below. After boot was completed, I also pressed the Shutdown button in Proxmox.

Loading kernel...
Loading initramfs...
Booting...

Please press Enter to activate this console. [    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.180+ (root@build6) (gcc version 8.5.0 (GCC) ) #42962 SMP Sat Apr 8 00:14:23 CST 2023
[    0.000000] Command line: withefi synoboot_satadom=1 dom_szmax=1034 console=ttyS0,115200n8 earlyprintk earlycon=uart8250,io,0x3f8,115200n8 root=/dev/md0 loglevel=15 log_buf_len=32M syno_hw_version=DS1621xs+ netif_num=1 pid=0x0000 mac1=001132D64C73 sn=2070RVR2JPQTF vid=0x0000 elevator=elevator HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 SataPortMap=3
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  960, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000400-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000000805fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000806000-0x0000000000807fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000808000-0x000000000080ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000810000-0x00000000008fffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000900000-0x00000000bec7dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bec7e000-0x00000000bed7ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bed80000-0x00000000bf6ebfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf6ec000-0x00000000bf96bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf96c000-0x00000000bf97dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf97e000-0x00000000bf9fdfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf9fe000-0x00000000bfeebfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfeec000-0x00000000bff6ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bff70000-0x00000000bfffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] earlycon: Early serial console at I/O port 0x3f8 (options '115200n8')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x00102000-0x0010202f] usable ==> usable
[    0.000000] e820: update [mem 0x00100000-0x0010006f] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000400-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000000010006f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000100070-0x0000000000101fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000102000-0x000000000010202f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000102030-0x0000000000805fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000806000-0x0000000000807fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000000808000-0x000000000080ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000810000-0x00000000008fffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000000900000-0x00000000bec7dfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bec7e000-0x00000000bed7ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bed80000-0x00000000bf6ebfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bf6ec000-0x00000000bf96bfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bf96c000-0x00000000bf97dfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000bf97e000-0x00000000bf9fdfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000bf9fe000-0x00000000bfeebfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bfeec000-0x00000000bff6ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bff70000-0x00000000bfffffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] efi: EFI v2.70 by EFI Development Kit II / OVMF
[    0.000000] efi:  SMBIOS=0xbf720000  ACPI=0xbf97d000  ACPI 2.0=0xbf97d014 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 3.20230228-2 04/04/2023
[    0.000000] Kernel/User page tables isolation: disabled
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 7000000000 mask 7000000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xbfeec max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 28672
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x13cd55000, 0x13cd55fff] PGTABLE
[    0.000000] BRK [0x13cd56000, 0x13cd56fff] PGTABLE
[    0.000000] BRK [0x13cd57000, 0x13cd57fff] PGTABLE
[    0.000000] BRK [0x13cd58000, 0x13cd58fff] PGTABLE
[    0.000000] BRK [0x13cd59000, 0x13cd59fff] PGTABLE
[    0.000000] BRK [0x13cd5a000, 0x13cd5afff] PGTABLE
[    0.000000] log_buf_len: 33554432 bytes
[    0.000000] early log buf free: 1041884(99%)
[    0.000000] RAMDISK: [mem 0x13828f000-0x13c1fffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000BF97D014 000024 (v02 BOCHS )
[    0.000000] ACPI: XSDT 0x00000000BF97C0E8 000054 (v01 BOCHS  BXPC     00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000BF977000 000074 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000BF978000 003D26 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000BF9DB000 000040
[    0.000000] ACPI: APIC 0x00000000BF976000 000080 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: SSDT 0x00000000BF975000 0000CA (v01 BOCHS  VMGENID  00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000BF974000 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: WAET 0x00000000BF973000 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: BGRT 0x00000000BF972000 000038 (v01 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000000805fff]
[    0.000000]   node   0: [mem 0x0000000000808000-0x000000000080ffff]
[    0.000000]   node   0: [mem 0x0000000000900000-0x00000000bec7dfff]
[    0.000000]   node   0: [mem 0x00000000bed80000-0x00000000bf6ebfff]
[    0.000000]   node   0: [mem 0x00000000bf9fe000-0x00000000bfeebfff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1046917
[    0.000000]   DMA zone: 59 pages used for memmap
[    0.000000]   DMA zone: 26 pages reserved
[    0.000000]   DMA zone: 3757 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12204 pages used for memmap
[    0.000000]   DMA32 zone: 781016 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x00100000-0x00100fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00102000-0x00102fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00806000-0x00807fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00810000-0x008fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbec7e000-0xbed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf6ec000-0xbf96bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf96c000-0xbf97dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf97e000-0xbf9fdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfeec000-0xbff6ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff70000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfeffbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xfeffbfff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88013dc00000 s95192 r8192 d31784 u1048576
[    0.000000] pcpu-alloc: s95192 r8192 d31784 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030532
[    0.000000] Kernel command line: withefi synoboot_satadom=1 dom_szmax=1034 console=ttyS0,115200n8 earlyprintk earlycon=uart8250,io,0x3f8,115200n8 root=/dev/md0 loglevel=15 log_buf_len=32M syno_hw_version=DS1621xs+ netif_num=1 pid=0x0000 mac1=001132D64C73 sn=2070RVR2JPQTF vid=0x0000 elevator=elevator HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 SataPortMap=3
[    0.000000] Synology boot device SATADOM: 1
[    0.000000] Synology Hardware Version: DS1621xs+
[    0.000000] Internal netif num: 1
[    0.000000] Mac1: 001132D64C73
[    0.000000] Serial Number: 2070RVR2JPQTF
[    0.000000] Disk Index Map: 00
[    0.000000] SYNO GPIO HDD detect pin: 0
[    0.000000] Vender format version: 2
[    0.000000] Power on seq num: 0
[    0.000000] Sata Port Map: 3
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 3939712K/4187668K available (5549K kernel code, 880K rwdata, 1780K rodata, 924K init, 1568K bss, 247956K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:4352 nr_irqs:440 16
[    0.000000] do_IRQ: 0.236 No irq handler for vector
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] bootconsole [uart0] disabled
[    0.000000] bootconsole [uart0] disabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3311.787 MHz processor
[    0.002004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6623.57 BogoMIPS (lpj=3311787)
[    0.004005] pid_max: default: 32768 minimum: 301
[    0.004610] ACPI: Core revision 20150930
[    0.007224] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.008156] Security Framework initialized
[    0.008701] AppArmor: AppArmor initialized
[    0.009007] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.010002] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.011181] Initializing cgroup subsys io
[    0.011732] Initializing cgroup subsys memory
[    0.012008] Initializing cgroup subsys devices
[    0.013006] Initializing cgroup subsys freezer
[    0.013617] CPU: Physical Processor ID: 0
[    0.014002] CPU: Processor Core ID: 0
[    0.026735] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.027003] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.028008] Speculative Store Bypass: Vulnerable
[    0.031416] Freeing SMP alternatives memory: 24K
[    0.032304] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.034648] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.044479] TSC deadline timer enabled
[    0.045000] smpboot: CPU0: Intel(R) Xeon(R) E-2124 CPU @ 3.30GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[    0.045226] Performance Events: generic architected perfmon, full-width counters, Intel PMU driver.
[    0.046247] ... version:                2
[    0.046805] ... bit width:              48
[    0.047002] ... generic registers:      8
[    0.047534] ... value mask:             0000ffffffffffff
[    0.048001] ... max period:             00007fffffffffff
[    0.048709] ... fixed-purpose events:   3
[    0.049002] ... event mask:             00000007000000ff
[    0.049962] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.051067] x86: Booting SMP configuration:
[    0.051812] .... node  #0, CPUs:      #1
[    0.065025] x86: Booted up 1 node, 2 CPUs
[    0.065595] smpboot: Total of 2 processors activated (13247.14 BogoMIPS)
[    0.066299] devtmpfs: initialized
[    0.067203] PM: Registering ACPI NVS region [mem 0x00806000-0x00807fff] (8192 bytes)
[    0.068013] PM: Registering ACPI NVS region [mem 0x00810000-0x008fffff] (983040 bytes)
[    0.069008] PM: Registering ACPI NVS region [mem 0xbf97e000-0xbf9fdfff] (524288 bytes)
[    0.070005] PM: Registering ACPI NVS region [mem 0xbff70000-0xbfffffff] (589824 bytes)
[    0.071059] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.072005] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.073134] NET: Registered protocol family 16
[    0.078024] cpuidle: using governor ladder
[    0.083006] cpuidle: using governor menu
[    0.083628] ACPI: bus type PCI registered
[    0.084115] PCI: Using configuration type 1 for base access
[    0.090227] ACPI: Added _OSI(Module Device)
[    0.090227] ACPI: Added _OSI(Processor Device)
[    0.090560] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.091002] ACPI: Added _OSI(Processor Aggregator Device)
[    0.093209] ACPI: Interpreter enabled
[    0.093689] ACPI: (supports S0 S4 S5)
[    0.094002] ACPI: Using IOAPIC for interrupt routing
[    0.095002] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.101028] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.101028] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.101888] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.102009] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.102047] PCI host bridge to bus 0000:00
[    0.103008] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.103008] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.105003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.105950] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.106002] pci_bus 0000:00: root bus resource [mem 0x7000000000-0x707fffffff window]
[    0.106997] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.108040] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.109168] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.111020] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.113004] pci 0000:00:01.1: reg 0x20: [io  0x10e0-0x10ef]
[    0.114429] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.116003] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.116824] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.117002] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.118001] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
[    0.121003] pci 0000:00:01.2: reg 0x20: [io  0x1080-0x109f]
[    0.123010] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.123388] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[    0.125011] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[    0.127193] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.129337] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff pref]
[    0.131037] pci 0000:00:02.0: reg 0x18: [mem 0xc1643000-0xc1643fff]
[    0.135022] pci 0000:00:02.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.136282] pci 0000:00:03.0: [1af4:1002] type 00 class 0x00ff00
[    0.137967] pci 0000:00:03.0: reg 0x10: [io  0x1000-0x103f]
[    0.141249] pci 0000:00:03.0: reg 0x20: [mem 0x7030000000-0x7030003fff 64bit pref]
[    0.143003] pci 0000:00:05.0: [1b36:0001] type 01 class 0x060400
[    0.144638] pci 0000:00:05.0: reg 0x10: [mem 0x703000e000-0x703000e0ff 64bit]
[    0.146797] pci 0000:00:07.0: [8086:2922] type 00 class 0x010601
[    0.149767] pci 0000:00:07.0: reg 0x20: [io  0x10a0-0x10bf]
[    0.152471] pci 0000:00:07.0: reg 0x24: [mem 0xc1642000-0xc1642fff]
[    0.154002] pci 0000:00:08.0: [1af4:1003] type 00 class 0x078000
[    0.155778] pci 0000:00:08.0: reg 0x10: [io  0x1040-0x107f]
[    0.156579] pci 0000:00:08.0: reg 0x14: [mem 0xc1641000-0xc1641fff]
[    0.159685] pci 0000:00:08.0: reg 0x20: [mem 0x7030004000-0x7030007fff 64bit pref]
[    0.162749] pci 0000:00:12.0: [1af4:1000] type 00 class 0x020000
[    0.163730] pci 0000:00:12.0: reg 0x10: [io  0x10c0-0x10df]
[    0.165583] pci 0000:00:12.0: reg 0x14: [mem 0xc1640000-0xc1640fff]
[    0.167593] pci 0000:00:12.0: reg 0x20: [mem 0x7030008000-0x703000bfff 64bit pref]
[    0.169584] pci 0000:00:12.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
[    0.170502] pci 0000:00:1e.0: [1b36:0001] type 01 class 0x060400
[    0.172288] pci 0000:00:1e.0: reg 0x10: [mem 0x703000d000-0x703000d0ff 64bit]
[    0.174798] pci 0000:00:1f.0: [1b36:0001] type 01 class 0x060400
[    0.175570] pci 0000:00:1f.0: reg 0x10: [mem 0x703000c000-0x703000c0ff 64bit]
[    0.178188] pci 0000:00:05.0: PCI bridge to [bus 01]
[    0.178871] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.179016] pci 0000:00:05.0:   bridge window [mem 0xc1400000-0xc15fffff]
[    0.179932] pci 0000:00:05.0:   bridge window [mem 0x7000000000-0x700fffffff 64bit pref]
[    0.182002] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.183020] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.183843] pci 0000:00:1e.0:   bridge window [mem 0xc1200000-0xc13fffff]
[    0.184030] pci 0000:00:1e.0:   bridge window [mem 0x7010000000-0x701fffffff 64bit pref]
[    0.185003] pci 0000:00:1f.0: PCI bridge to [bus 03]
[    0.185003] pci 0000:00:1f.0:   bridge window [io  0xc000-0xcfff]
[    0.186017] pci 0000:00:1f.0:   bridge window [mem 0xc1000000-0xc11fffff]
[    0.186972] pci 0000:00:1f.0:   bridge window [mem 0x7020000000-0x702fffffff 64bit pref]
[    0.188888] pci_bus 0000:00: on NUMA node 0
[    0.190276] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0, disabled.
[    0.191418] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.192330] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *10 11)
[    0.193193] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.194065] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.195086] ACPI: Enabled 3 GPEs in block 00 to 0F
[    0.196033] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.196778] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.198015] vgaarb: loaded
[    0.198395] vgaarb: bridge control possible 0000:00:02.0
[    0.199084] SCSI subsystem initialized
[    0.200005] libata version 3.00 loaded.
[    0.200033] pps_core: LinuxPPS API ver. 1 registered
[    0.200683] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.202022] PTP clock support registered
[    0.203013] EDAC MC: Ver: 3.0.0
[    0.203268] EFI Variables Facility v0.08 2004-May-17
[    0.204639] pstore: Registered efi as persistent store backend
[    0.205013] PCI: Using ACPI for IRQ routing
[    0.206011] PCI: pci_cache_line_size set to 64 bytes
[    0.206193] e820: reserve RAM buffer [mem 0x00102000-0x001fffff]
[    0.206992] e820: reserve RAM buffer [mem 0x00806000-0x008fffff]
[    0.208018] e820: reserve RAM buffer [mem 0x00810000-0x008fffff]
[    0.208812] e820: reserve RAM buffer [mem 0xbec7e000-0xbfffffff]
[    0.210184] e820: reserve RAM buffer [mem 0xbf6ec000-0xbfffffff]
[    0.210775] e820: reserve RAM buffer [mem 0xbfeec000-0xbfffffff]
[    0.212024] clocksource: Switched to clocksource hpet
[    0.217493] AppArmor: AppArmor Filesystem Enabled
[    0.218211] pnp: PnP ACPI init
[    0.218718] pnp 00:00: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.219766] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.220735] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.221778] pnp 00:03: [dma 2]
[    0.222261] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.223229] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.224352] pnp: PnP ACPI: found 5 devices
[    0.230283] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.231533] pci 0000:00:02.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.232900] pci 0000:00:12.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
[    0.235179] pci 0000:00:12.0: BAR 6: assigned [mem 0xc1600000-0xc163ffff pref]
[    0.236178] pci 0000:00:02.0: BAR 6: assigned [mem 0xc1650000-0xc165ffff pref]
[    0.237149] pci 0000:00:05.0: PCI bridge to [bus 01]
[    0.237802] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.238994] pci 0000:00:05.0:   bridge window [mem 0xc1400000-0xc15fffff]
[    0.240481] pci 0000:00:05.0:   bridge window [mem 0x7000000000-0x700fffffff 64bit pref]
[    0.242574] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.243300] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.244478] pci 0000:00:1e.0:   bridge window [mem 0xc1200000-0xc13fffff]
[    0.245676] pci 0000:00:1e.0:   bridge window [mem 0x7010000000-0x701fffffff 64bit pref]
[    0.247244] pci 0000:00:1f.0: PCI bridge to [bus 03]
[    0.247930] pci 0000:00:1f.0:   bridge window [io  0xc000-0xcfff]
[    0.249206] pci 0000:00:1f.0:   bridge window [mem 0xc1000000-0xc11fffff]
[    0.250389] pci 0000:00:1f.0:   bridge window [mem 0x7020000000-0x702fffffff 64bit pref]
[    0.252368] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.253239] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.254142] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.255118] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.256035] pci_bus 0000:00: resource 8 [mem 0x7000000000-0x707fffffff window]
[    0.256986] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.257761] pci_bus 0000:01: resource 1 [mem 0xc1400000-0xc15fffff]
[    0.258605] pci_bus 0000:01: resource 2 [mem 0x7000000000-0x700fffffff 64bit pref]
[    0.259673] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.260427] pci_bus 0000:02: resource 1 [mem 0xc1200000-0xc13fffff]
[    0.261262] pci_bus 0000:02: resource 2 [mem 0x7010000000-0x701fffffff 64bit pref]
[    0.262562] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.263360] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc11fffff]
[    0.264239] pci_bus 0000:03: resource 2 [mem 0x7020000000-0x702fffffff 64bit pref]
[    0.265352] NET: Registered protocol family 2
[    0.267683] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.268785] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.270216] TCP: Hash tables configured (established 32768 bind 32768)
[    0.271171] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.272046] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.272970] NET: Registered protocol family 1
[    0.273598] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.274517] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.291792] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.308710] pci 0000:00:02.0: Video device with shadowed ROM
[    0.309683] PCI: CLS 0 bytes, default 64
[    1.269385] Trying to unpack rootfs image as initramfs...
[    1.297342] Freeing initrd memory: 64964K
[    1.299693] redpill: loading out-of-tree module taints kernel.
[    1.300710] redpill: module verification failed: signature and/or required key missing - tainting kernel
[    1.316630] PCI host bridge to bus 0001:09
[    1.317205] pci_bus 0001:09: root bus resource [io  0x0000-0xffff]
[    1.317997] pci_bus 0001:09: root bus resource [mem 0x00000000-0x7fffffffff]
[    1.318913] pci_bus 0001:09: root bus resource [bus 00-ff]
[    1.319680] pci 0001:09:00.0: [1b4b:9235] type 00 class 0x010601
[    1.320531] pci 0001:09:00.0: Can't map mv9235 registers
[    1.321263] PCI host bridge to bus 0001:0c
[    1.321844] pci_bus 0001:0c: root bus resource [io  0x0000-0xffff]
[    1.322700] pci_bus 0001:0c: root bus resource [mem 0x00000000-0x7fffffffff]
[    1.323633] pci_bus 0001:0c: busn_res: can not insert [bus 0c-ff] under domain [bus 00-ff] (conflicts with (null) [bus 09-ff])
[    1.325177] pci_bus 0001:0c: root bus resource [bus 00-ff]
[    1.325905] pci 0001:0c:00.0: [1b4b:9235] type 00 class 0x010601
[    1.326751] pci 0001:0c:00.0: Can't map mv9235 registers
[    1.337530] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.338503] software IO TLB: mapped [mem 0xb9f37000-0xbdf37000] (64MB)
[    1.339989] audit: initializing netlink subsys (disabled)
[    1.340763] audit: type=2000 audit(1686077105.340:1): initialized
[    1.342059] Initialise system trusted keyring
[    1.367848] VFS: Disk quotas dquot_6.6.0
[    1.368551] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.524414] Key type asymmetric registered
[    1.525104] Asymmetric key parser 'x509' registered
[    1.525766] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.526804] io scheduler noop registered
[    1.527325] io scheduler deadline registered
[    1.527896] io scheduler cfq registered (default)
[    1.541872] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.566774] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.250560] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.256199] brd: module loaded
[    2.257139] Loading iSCSI transport class v2.0-870.
[    2.263612] rdac: device handler registered
[    2.293852] i2c /dev entries driver
[    2.294502] ahci 0000:00:07.0: version 3.0
[    2.311356] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[    2.312558] ahci 0000:00:07.0: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    2.313984] ahci 0000:00:07.0: flags: 64bit ncq only 
[    2.341051] tsc: Refined TSC clocksource calibration: 3311.977 MHz
[    2.341953] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fbd7e467c1, max_idle_ns: 440795237359 ns
[    2.372501] scsi host0: ahci
[    2.374110] scsi host1: ahci
[    2.376501] scsi host2: ahci
[    2.377114] ata1: SATA max UDMA/133 abar m4096@0xc1642000 port 0xc1642100 irq 24
[    2.379392] ata2: SATA max UDMA/133 abar m4096@0xc1642000 port 0xc1642180 irq 24
[    2.382173] ata3: SATA max UDMA/133 abar m4096@0xc1642000 port 0xc1642200 irq 24
[    2.384785] ahci: probe of 0001:09:00.0 failed with error -22
[    2.384786] parameter error. gpiobase=00000000, pin=0, pValue=ffff8800b69b3d64
[    2.386961] ahci: probe of 0001:0c:00.0 failed with error -22
[    2.387924] rtc_cmos 00:04: RTC can wake from S4
[    2.390852] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.392309] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    2.393499] md: raid1 personality registered for level 1
[    2.394657] NET: Registered protocol family 17
[    2.395299] Key type dns_resolver registered
[    2.396656] mce: Using 10 MCE banks
[    2.397290] registered taskstats version 1
[    2.397972] Loading compiled-in untrusted X.509 certificates
[    2.398792] Loading compiled-in X.509 certificates
[    2.399508] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[    2.401386] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[    2.402809] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[    2.404345] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[    2.405661] page_owner is disabled
[    2.406162] AppArmor: AppArmor sha1 policy hashing enabled
[    8.410290] clocksource: Switched to clocksource tsc
[    8.411447] rtc_cmos 00:04: setting system clock to 2023-06-06 18:45:13 UTC (1686077113)
[    8.511252] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    8.512738] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[    8.513981] ata1.00: 2097152 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    8.515257] ata1.00: SN:QM00005
[    8.515862] ata1.00: applying bridge limits
[    8.517182] ata1.00: configured for UDMA/100
[    8.518303] ata1.00: Find SSD disks. [QEMU HARDDISK]
[    8.519937] scsi 0:0:0:0: Direct-Access     QEMU     HARDDISK                 2.5+ PQ: 0 ANSI: 5
[    8.522427] sd 0:0:0:0: [synoboot] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[    8.524391] sd 0:0:0:0: [synoboot] Write Protect is off
[    8.525589] sd 0:0:0:0: [synoboot] Mode Sense: 00 3a 00 00
[    8.526915] sd 0:0:0:0: [synoboot] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.529966]  synoboot: synoboot1 synoboot2 synoboot3
[    8.531449] sd 0:0:0:0: [synoboot] Attached SCSI disk
[    8.714501] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    8.720751] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    8.724468] ata2.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[    8.732728] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    8.736525] ata2.00: SN:QM00007
[    8.738945] ata2.00: applying bridge limits
[    8.744670] ata2.00: configured for UDMA/100
[    8.750150] ata2.00: Find SSD disks. [QEMU HARDDISK]
[    8.750183] ata3.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[    8.750186] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    8.750188] ata3.00: SN:QM00009
[    8.750193] ata3.00: applying bridge limits
[    8.758813] ata3.00: configured for UDMA/100
[    8.771250] scsi 1:0:0:0: Direct-Access     QEMU     HARDDISK                 2.5+ PQ: 0 ANSI: 5
[    8.776737] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    8.776781] ata3.00: Find SSD disks. [QEMU HARDDISK]
[    8.784143] sd 1:0:0:0: [sdb] Write Protect is off
[    8.786848] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    8.791283] scsi 2:0:0:0: Direct-Access     QEMU     HARDDISK                 2.5+ PQ: 0 ANSI: 5
[    8.794096] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.801243]  sdb: sdb1 sdb2 sdb3 < sdb5 >
[    8.802191] sd 1:0:0:0: [sdb] Attached SCSI disk
[    8.822125] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    8.824041] sd 2:0:0:0: [sdc] Write Protect is off
[    8.825279] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    8.827135] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.833845]  sdc: sdc1 sdc2 sdc3 < sdc5 >
[    8.836196] sd 2:0:0:0: [sdc] Attached SCSI disk
[    8.838947] Freeing unused kernel memory: 924K
[    8.839945] Write protecting the kernel read-only data: 8192k
[    8.841479] Freeing unused kernel memory: 584K
[    8.842945] Freeing unused kernel memory: 268K
START /linuxrc.syno
START /linuxrc.syno.impl
[    8.984026] random: nonblocking pool is initialized
addons.sh called with params early
MajorVersion:7 MinorVersion:1
Insert Marvell 1475 SATA controller driver
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module [    9.041733] ACPI: bus type USB registered
[    9.042346] usbcore: registered new interface driver usbfs
u[    9.043121] usbcore: registered new interface driver hub
[    9.044007] usbcore: registered new interface driver ethub
s[    9.044770] usbcore: registered new device driver usb
bcore ... [  OK  ]
:: Loading module ehci-hcd[    9.059571] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ... [  OK  ]
:: Loading module ehci-pci[    9.065661] ehci-pci: EHCI PCI platform driver
 ... [  OK  ]
:: Loading mo[    9.071374] uhci_hcd: USB Universal Host Controller Interface driver
dule uhci-hcd[    9.088247] uhci_hcd 0000:00:01.2: UHCI Host Controller
[    9.088975] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[    9.090064] uhci_hcd 0000:00:01.2: irq 11, io base 0x00001080
[    9.091217] hub 1-0:1.0: USB hub found
[    9.091723] hub 1-0:1.0: 2 ports detected
 ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module xhci-pci ... [  OK  ]
addons.sh called with params modules
MajorVersion:7 MinorVersion:1
Starting eudev daemon - modules
depmod: WARNING: could not open modules.order at /lib/modules: No such file or directory
depmod: WARNING: could not open modules.builtin at /lib/modules: No such file or directory
depmod: WARNING: could not open modules.builtin.modinfo at /lib/modules: No such file or directory
[    9.245315] udevd[4642]: starting version 3.2.11
[    9.246320] udevd[4642]: specified group 'tty' unknown
[    9.247072] udevd[4642]: specified group 'dialout' unknown
[    9.247793] udevd[4642]: specified group 'kmem' unknown
[    9.248499] udevd[4642]: specified group 'input' unknown
[    9.249241] udevd[4642]: specified group 'video' unknown
[    9.250052] udevd[4642]: specified group 'sgx' unknown
[    9.250753] udevd[4642]: specified group 'audio' unknown
[    9.251535] udevd[4642]: specified group 'disk' unknown
[    9.252255] udevd[4642]: specified group 'cdrom' unknown
[    9.252981] udevd[4642]: specified group 'tape' unknown
[    9.253725] udevd[4642]: specified group 'kvm' unknown
[    9.256126] udevd[4643]: starting eudev-3.2.11
Triggering add events to udev
[    9.260379] udevd[4643]: specified group 'tty' unknown
[    9.261196] udevd[4643]: specified group 'dialout' unknown
[    9.261966] udevd[4643]: specified group 'kmem' unknown
[    9.262914] udevd[4643]: specified group 'input' unknown
[    9.263637] udevd[4643]: specified group 'video' unknown
[    9.264453] udevd[4643]: specified group 'sgx' unknown
[    9.265274] udevd[4643]: specified group 'audio' unknown
[    9.266063] udevd[4643]: specified group 'disk' unknown
[    9.266795] udevd[4643]: specified group 'cdrom' unknown
[    9.267781] udevd[4643]: specified group 'tape' unknown
[    9.268543] udevd[4643]: specified group 'kvm' unknown
[    9.281609] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    9.283262] ACPI: Power Button [PWRF]
[    9.288484] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    9.290364] serio: i8042 KBD port at 0x60,0x64 irq 1
[    9.291010] serio: i8042 AUX port at 0x60,0x64 irq 12
[    9.351578] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[    9.386547] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    9.418091] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    9.616093] usbcore: registered new interface driver usbhid
[    9.619560] usbhid: USB HID core driver
[    9.624707] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3
[    9.631255] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
Insert net driver(Mindspeed only)...
[   19.655725] broadwellnk_synobios: module license 'Synology Inc.' taints kernel.
[   19.656760] Disabling lock debugging due to kernel taint
[   19.663515] synobios open /dev/ttyS1 success
[   19.664304] 2023-6-6 18:45:24 UTC
[   19.664744] synobios: load, major number 201
[   19.665315] Brand: Synology
[   19.665696] Model: Unknown
[   19.666063] set group disks wakeup number to 5, spinup time deno 1
[   19.666867] synobios cpu_arch proc entry initialized
[   19.667525] synobios crypto_hw proc entry initialized
[   19.668193] synobios syno_platform proc entry initialized
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
[   19.675386] Module [broadwellnk_synobios] is removed. 
[   19.676153] synobios: unload
addons.sh called with params patches
MajorVersion:7 MinorVersion:1
Adjust disks related configs automatically - patches
set maxdisks=6
set internalportcfg=0x3f
get esataportcfg=0
set usbportcfg=0xf00000
maxdisks=6
internalportcfg=0x3f
esataportcfg=0
usbportcfg=0xf00000
Insert synorbd kernel module
Insert synofsbd kernel module
Insert sha256 kernel module
All disk ready or timeout execeed
Assemble args: -u ccf0fd39:12938d3f:05d949f[   19.782363] md: md0 stopped.
7:b0bbaec7 /dev/sdb1 /dev/sdc1
[   19.803023] md: bind<sdc1>
[   19.803703] md: bind<sdb1>
[   19.804824] md/raid1:md0: active with 2 out of 6 mirrors
[   19.819969] md0: detected capacity change from 0 to 8589869056
mdadm: /dev/md0 has been started with 2 drives (out of 6).
Partition Version=9
[   19.876826] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   19.935984] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
 /sbin/e2fsck exists, checking /dev/md0... 
e2fsck 1.44.1 (24-Mar-2018)
/sbin/e2fsck -yvf returns 0
Mounting /dev/md0 /tmpRoot
[   20.748440] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   20.765379] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota
------------upgrade
Begin upgrade procedure
[   20.891714] loop: module loaded
[   20.958274] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities
[   21.037533] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
Failed to found any patch
No upgrade file found
============upgrade
------------bootup-smallupdate
mkdir: can't create directory '/tmpRoot/proc': File exists
mkdir: can't create directory '/tmpRoot/sys': File exists
mkdir: can't create directory '/tmpRoot/dev': File exists
Try bootup smallupdate
No patch exist. Skip Packed Bootup SmallUpdate
Sparse files don't exist. Skip Sparse Bootup SmallUpdate
Finished synoautonano
============bootup-smallupdate
Wait 2 seconds for synology manufactory device
Tue Jun  6 18:45:29 UTC 2023
addons.sh called with params jrExit
MajorVersion:7 MinorVersion:1
/dev/md0 /tmpRoot ext4 rw,relatime,prjquota,rootprjquota,data=ordered 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
root: Start backing up logs in junior mode
[   25.710132] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   25.746583] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
umount: /etc/mtab: No such file or directory
linuxrc.syno executed successfully.
Post init
[   25.999700] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   26.021718] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1,prjquota,rootprjquota

grep: /tmpRoot/usr/share/init/tty.conf: No such file or directory
addons.sh called with params late
Script for fixing missing HW features dependencies and another functions
'/usr/bin/arpl-reboot.sh' -> '/tmpRoot/usr/bin/arpl-reboot.sh'
'/usr/bin/arc-reboot.sh' -> '/tmpRoot/usr/bin/arc-reboot.sh'
'/usr/bin/grub-editenv' -> '/tmpRoot/usr/bin/grub-editenv'
modprobe: ERROR: could not insert 'acpi_cpufreq': No such device
CPU does NOT support CPU Performance Scaling, disabling
CPU Supports SSE4.2, crc32c-intel should load
CPU Supports AES, aesni-intel should load
MajorVersion:7 MinorVersion:1
Starting eudev daemon - late
copy modules
depmod: WARNING: could not open modules.order at /tmpRoot//lib/modules: No such file or directory
depmod: WARNING: could not open modules.builtin at /tmpRoot//lib/modules: No such file or directory
depmod: WARNING: could not open modules.builtin.modinfo at /tmpRoot//lib/modules: No such file or directory
Copy rules
'/usr/lib/udev/rules.d/50-udev-default.rules' -> '/tmpRoot/usr/lib/udev/rules.d/50-udev-default.rules'
'/usr/lib/udev/rules.d/50-usb-realtek-net.rules' -> '/tmpRoot/usr/lib/udev/rules.d/50-usb-realtek-net.rules'
'/usr/lib/udev/rules.d/50-user-power-save.rules' -> '/tmpRoot/usr/lib/udev/rules.d/50-user-power-save.rules'
'/usr/lib/udev/rules.d/60-block.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-block.rules'
'/usr/lib/udev/rules.d/60-cdrom_id.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-cdrom_id.rules'
'/usr/lib/udev/rules.d/60-drm.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-drm.rules'
'/usr/lib/udev/rules.d/60-evdev.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-evdev.rules'
'/usr/lib/udev/rules.d/60-input-id.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-input-id.rules'
'/usr/lib/udev/rules.d/60-persistent-alsa.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-persistent-alsa.rules'
'/usr/lib/udev/rules.d/60-persistent-input.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-persistent-input.rules'
'/usr/lib/udev/rules.d/60-persistent-v4l.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-persistent-v4l.rules'
'/usr/lib/udev/rules.d/60-sensor.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-sensor.rules'
'/usr/lib/udev/rules.d/60-serial.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-serial.rules'
'/usr/lib/udev/rules.d/64-btrfs.rules' -> '/tmpRoot/usr/lib/udev/rules.d/64-btrfs.rules'
'/usr/lib/udev/rules.d/70-joystick.rules' -> '/tmpRoot/usr/lib/udev/rules.d/70-joystick.rules'
'/usr/lib/udev/rules.d/70-mouse.rules' -> '/tmpRoot/usr/lib/udev/rules.d/70-mouse.rules'
'/usr/lib/udev/rules.d/70-touchpad.rules' -> '/tmpRoot/usr/lib/udev/rules.d/70-touchpad.rules'
'/usr/lib/udev/rules.d/75-net-description.rules' -> '/tmpRoot/usr/lib/udev/rules.d/75-net-description.rules'
'/usr/lib/udev/rules.d/78-sound-card.rules' -> '/tmpRoot/usr/lib/udev/rules.d/78-sound-card.rules'
'/usr/lib/udev/rules.d/80-drivers.rules' -> '/tmpRoot/usr/lib/udev/rules.d/80-drivers.rules'
'/tmpRoot/lib/systemd/system/multi-user.target.wants/udevrules.service' -> '/lib/systemd/system/udevrules.service'
Adjust disks related configs automatically - late
Adjust maxdisks and internalportcfg automatically
maxdisks=6
internalportcfg=0x3f
usbportcfg=0xf00000
'/etc/extensionPorts' -> '/tmpRoot/etc/extensionPorts'
'/etc/extensionPorts' -> '/tmpRoot/etc.defaults/extensionPorts'
Creating service to exec ethtool
'/usr/sbin/ethtool' -> '/tmpRoot/usr/sbin/ethtool'
Copying lshw to HD
'/usr/sbin/lshw' -> '/tmpRoot/usr/sbin/lshw'
'/usr/share/lshw/pci.ids' -> '/tmpRoot/usr/share/lshw/lshw/pci.ids'
'/usr/share/lshw/pnp.ids' -> '/tmpRoot/usr/share/lshw/lshw/pnp.ids'
'/usr/share/lshw/manuf.txt' -> '/tmpRoot/usr/share/lshw/lshw/manuf.txt'
'/usr/share/lshw/oui.txt' -> '/tmpRoot/usr/share/lshw/lshw/oui.txt'
'/usr/share/lshw/pnpid.txt' -> '/tmpRoot/usr/share/lshw/lshw/pnpid.txt'
'/usr/share/lshw/usb.ids' -> '/tmpRoot/usr/share/lshw/lshw/usb.ids'
'/usr/share/lshw' -> '/tmpRoot/usr/share/lshw/lshw'
Creating service to exec CPU Info
'/usr/sbin/cpuinfo.sh' -> '/tmpRoot/usr/sbin/cpuinfo.sh'
Installing powersched tools
'/usr/sbin/powersched' -> '/tmpRoot/usr/sbin/powersched'
Installing daemon for ACPI button
'/etc/acpi/events/power' -> '/tmpRoot/etc/acpi/events/power'
'/usr/sbin/acpid' -> '/tmpRoot/usr/sbin/acpid'
'/etc/acpi/power.sh' -> '/tmpRoot/etc/acpi/power.sh'
'/tmpRoot/lib/systemd/system/multi-user.target.wants/acpid.service' -> '/usr/lib/systemd/system/acpid.service'
Copying lsiutil to HD
'/usr/sbin/lsiutil' -> '/tmpRoot/usr/sbin/lsiutil'
[   28.603432] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[   28.619210] systemd[1]: Detected virtualization kvm.
[   28.621526] systemd[1]: Detected architecture x86-64.

Welcome to Linux!

[   28.626954] systemd[1]: Set hostname to <test-dsm>.
[   29.859157] systemd[1]: Cannot add dependency job for unit syno-mlnx-rdma-modules-load.service, ignoring: Unit syno-mlnx-rdma-modules-load.service is masked.
[   29.862197] systemd[1]: Cannot add dependency job for unit syno-qlogic-rdma-modules-load.service, ignoring: Unit syno-qlogic-rdma-modules-load.service is masked.
[   29.865127] systemd[1]: Cannot add dependency job for unit pkg-synobrm-recovery-restart.service, ignoring: Unit pkg-synobrm-recovery-restart.service failed to load: No such file or directory.
[   29.868293] systemd[1]: Cannot add dependency job for unit SynoLedBrightness.service, ignoring: Unit SynoLedBrightness.service is masked.
[   29.870541] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory.
[   29.873531] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory.
[  OK  ] Reached target Paths.
[   29.878290] systemd[1]: Reached target Paths.
[   29.878924] systemd[1]: Starting Paths.
[  OK  ] Reached target Timers.
[   29.880202] systemd[1]: Reached target Timers.
[   29.880858] systemd[1]: Starting Timers.
[  OK  ] Created slice Root Slice.
[   29.882268] systemd[1]: Created slice Root Slice.
[   29.882882] systemd[1]: Starting Root Slice.
[  OK  ] Created slice HybridShare's slice.
[   29.884215] systemd[1]: Created slice HybridShare's slice.
[   29.884920] systemd[1]: Starting HybridShare's slice.
[  OK  ] Created slice synobackup daemon slice.
[   29.886434] systemd[1]: Created slice synobackup daemon slice.
[   29.887406] systemd[1]: Starting synobackup daemon slice.
[  OK  ] Listening on udev Control Socket.
[   29.888858] systemd[1]: Listening on udev Control Socket.
[   29.889577] systemd[1]: Starting udev Control Socket.
[  OK  ] Created slice ActiveInsight's slice.
[   29.891029] systemd[1]: Created slice ActiveInsight's slice.
[   29.891765] systemd[1]: Starting ActiveInsight's slice.
[  OK  ] Created slice Python2's slice.
[   29.893171] systemd[1]: Created slice Python2's slice.
[   29.893842] systemd[1]: Starting Python2's slice.
[  OK  ] Created slice FileStation's slice.
[   29.895226] systemd[1]: Created slice FileStation's slice.
[   29.895937] systemd[1]: Starting FileStation's slice.
[  OK  ] Created slice Package Center Slice.
[   29.897432] systemd[1]: Created slice Package Center Slice.
[   29.898170] systemd[1]: Starting Package Center Slice.
[  OK  ] Created slice Synology DSM Storage Service.
[   29.899677] systemd[1]: Created slice Synology DSM Storage Service.
[   29.900496] systemd[1]: Starting Synology DSM Storage Service.
[  OK  ] Listening on udev Kernel Socket.
[   29.901960] systemd[1]: Listening on udev Kernel Socket.
[   29.902665] systemd[1]: Starting udev Kernel Socket.
[  OK  ] Created slice System Slice.
[   29.904030] systemd[1]: Created slice System Slice.
[   29.904681] systemd[1]: Starting System Slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[   29.906165] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   29.906970] systemd[1]: Starting system-serial\x2dgetty.slice.
[  OK  ] Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[   29.908774] systemd[1]: Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[   29.909828] systemd[1]: Starting system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[  OK  ] Created slice User and Session Slice.
[   29.911631] systemd[1]: Created slice User and Session Slice.
[   29.912367] systemd[1]: Starting User and Session Slice.
[  OK  ] Created slice BTRFS Space Reclaim.
[   29.913824] systemd[1]: Created slice BTRFS Space Reclaim.
[   29.914535] systemd[1]: Starting BTRFS Space Reclaim.
[  OK  ] Created slice SSDP service.
[   29.915862] systemd[1]: Created slice SSDP service.
[   29.916499] systemd[1]: Starting SSDP service.
[  OK  ] Created slice Shared Folder Sync.
[   29.917824] systemd[1]: Created slice Shared Folder Sync.
[   29.918520] systemd[1]: Starting Shared Folder Sync.
[  OK  ] Created slice SecureSignIn's slice.
[   29.919915] systemd[1]: Created slice SecureSignIn's slice.
[   29.920632] systemd[1]: Starting SecureSignIn's slice.
[  OK  ] Created slice ScsiTarget's slice.
[   29.922099] systemd[1]: Created slice ScsiTarget's slice.
[   29.922800] systemd[1]: Starting ScsiTarget's slice.
[  OK  ] Created slice Synology Flashcache.
[   29.924217] systemd[1]: Created slice Synology Flashcache.
[   29.924922] systemd[1]: Starting Synology Flashcache.
[  OK  ] Created slice SNMP.
[   29.926221] systemd[1]: Created slice SNMP.
[   29.926767] systemd[1]: Starting SNMP.
[  OK  ] Created slice Synology Index slice (WAT).
[   29.928091] systemd[1]: Created slice Synology Index slice (WAT).
[   29.928880] systemd[1]: Starting Synology Index slice (WAT).
[  OK  ] Listening on Journal Socket.
[   29.930346] systemd[1]: Listening on Journal Socket.
[   29.931165] systemd[1]: Starting Journal Socket.
[   29.935088] systemd[1]: Starting Journal Socket (/dev/log).
[   29.936744] systemd[1]: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[   29.938547] systemd[1]: Starting Link coredump path to volume if possible...
         Starting Link coredump path to volume if possible...
[   29.941111] systemd[1]: Starting Disabling fan checking flag ......
         Starting Disabling fan checking flag ......
[   29.943877] systemd[1]: Mounting Debug File System...
         Mounting Debug File System...
[   29.945763] systemd[1]: Starting Set time zone information to kernel...
         Starting Set time zone information to kernel...
[   29.947725] systemd[1]: Starting Set hostname...
         Starting Set hostname...
[   29.949200] systemd[1]: Starting Set boot sequence config...
         Starting Set boot sequence config...
[   29.951726] systemd[1]: Starting SED Bootup Action...
         Starting SED Bootup Action...
[   29.979773] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[   29.982787] flashcache: flashcache-1.0-2022-09-21-00:34 initialized
[   29.991382] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2022-09-21-00:34-debug initialized
[   30.002754] NET: Registered protocol family 10
[   30.004745] sit: IPv6 over IPv4 tunneling driver
[   30.011393] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   30.012540] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   30.013933] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   30.029099] systemd[1]: Mounting Temporary Directory...
         Mounting Temporary Directory...
[   30.031162] systemd[1]: Starting Load ntb_brd module...
         Starting Load ntb_brd module...
[   30.033056] systemd[1]: Starting check integrity of rd.gz decompression...
         Starting check integrity of rd.gz decompression...
[  OK  ] Created slice Synology Cache Advisor.
[   30.035539] systemd[1]: Created slice Synology Cache Advisor.
[   30.036303] systemd[1]: Starting Synology Cache Advisor.
[  OK  ] Created slice scemd.
[   30.037647] systemd[1]: Created slice scemd.
[   30.038223] systemd[1]: Starting scemd.
[  OK  ] Listening on Journal Audit Socket.
[   30.039725] systemd[1]: Listening on Journal Audit Socket.
[   30.040523] systemd[1]: Starting Journal Audit Socket.
[   30.040889] e1000e: Intel(R) PRO/1000 Network Driver - 3.8.4-NAPI
[   30.040889] e1000e: Copyright(c) 1999 - 2020 Intel Corporation.
[  OK  ] Started Machine Check Exception Logging Daemon.
[   30.044144] systemd[1]: Started Machine Check Exception Logging Daemon.
[   30.045046] systemd[1]: Starting Machine Check Exception Logging Daemon...
         Starting Machine Check Exception Logging Daemon...
[   30.047139] systemd[1]: Starting unbind USB device...
         Starting unbind USB device...
[  OK  ] Reached target Slices.
[   30.049024] systemd[1]: Reached target Slices.
[   30.049721] systemd[1]: Starting Slices.
[[   30.050393] dca service started, version 1.12.1
  OK  ] Created slice SynoFinder's slice[   30.051486] Intel(R) Gigabit Ethernet Linux Driver - version 5.7.2
.[   30.052803] Copyright(c) 2007 - 2021 Intel Corporation.

[   30.053919] systemd[1]: Created slice SynoFinder's slice.
[   30.054649] systemd[1]: Starting SynoFinder's slice.
[  OK  ] Created slice Synology DSM internal service.
[   30.056195] systemd[1]: Created slice Synology DSM internal service.
[   30.057260] systemd[1]: Starting Synology DSM internal service.
[  OK  ] Created slice BTRFS Optimization.
[   30.058845] systemd[1]: Created slice BTRFS Optimization.
[   30.059743] systemd[1]: Starting BTRFS Optimization.
[  OK  ] Created slice OAuthService's slice.
[   30.061295] systemd[1]: Created slice OAuthService's slice.
[   30.062084] systemd[1]: Starting OAuthService's slice.
[  OK  ] Created slice SMBService's slice.
[   30.063613] systemd[1]: Created slice SMBService's slice.
[   30.064395] systemd[1]: Starting SMBService's slice.
[  OK  ] Created slice Synology Swap Works.
[   30.065988] systemd[1]: Created slice Synology Swap Works.
[   30.066756] systemd[1]: Starting Synology Swap Works.
[  OK  ] Created slice Synology DSM desktop service.
[   30.068476] systemd[1]: Created slice Synology DSM desktop service.
[   30.069681] systemd[1]: Starting Synology DSM desktop service.
[  OK  ] Created slice RAID Resync Process. ...ing Resync, Repair and Reshape..
[   30.072265] systemd[1]: Created slice RAID Resync Process. Including Resync, Repair and Reshape..
[   30.074147] systemd[1]: Starting RAID Resync Process. Including Resync, Repair and Reshape..
[   30.080162] systemd[1]: Starting Synology Task Scheduler Init...
         Starting Synology Task Scheduler Init...
[  OK  ] Reached target Swap.
[   30.083059] systemd[1]: Reached target Swap.
[   30.083631] systemd[1]: Starting Swap.
[  OK  ] Created slice Task Scheduler Group.
[   30.085021] systemd[1]: Created slice Task Scheduler Group.
[   30.085757] systemd[1]: Starting Task Scheduler Group.
[   30.086496] systemd[1]: Started Set project quota ID for /var/log.
[  OK  ] Created slice Performance alarm.
[   30.088178] systemd[1]: Created slice Performance alarm.
[   30.088906] systemd[1]: Starting Performance alarm.
[  OK  ] Mounted Debug File System.
[   30.090600] systemd[1]: Mounted Debug File System.
[  OK  ] Mounted Temporary Directory.
[   30.092168] systemd[1]: Mounted Temporary Directory.
[  OK  ] Listening on Journal Socket (/dev/log).
[   30.093807] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Started Disabling fan checking flag ....
[   30.095589] systemd[1]: Started Disabling fan checking flag ....
[  OK  ] Started Set time[   30.097102] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.16.5
 zone information to kernel.[   30.098713] Copyright(c) 1999 - 2022 Intel Corporation.

[   30.099934] systemd[1]: Started Set time zone information to kernel.
[  OK  ] Started Set hostname.
[   30.101655] systemd[1]: Started Set hostname.
[  OK  ] Started Set boot sequence config.
[   30.103184] systemd[1]: Started Set boot sequence config.
[  OK  ] Started SED Bootup Action.
[   30.104728] systemd[1]: Started SED Bootup Action.
[  OK  [   30.105788] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 2.20.12
[   30.107381] i40e: Copyright(c) 2013 - 2022 Intel Corporation.
] Started Load ntb_brd module.
[   30.108946] systemd[1]: Started Load ntb_brd module.
[  OK  ] Started unbind USB device.
[   30.110561] systemd[1]: Started unbind USB device.
[  OK  ] Reached target Sockets.
[   30.112165] systemd[1]: Reached target Sockets.
[   30.112761] systemd[1]: Starting Sockets.
[   30.119182] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[  OK  ] Reached target Local File Systems.
[   30.121889] systemd[1]: Reached target Local File Systems.
[   30.122720] systemd[1]: Starting Local File Systems.
[   30.123839] systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[   30.125659] systemd[1]: Starting Set boot sequence config for temporary use...
         Starting Set boot sequence config for temporary use...
[   30.127667] systemd[1]: Starting D-Bus System Message Bus...
         Starting D-Bus System Message Bus...
[   30.130175] systemd[1]: Starting D-Bus Session Message Bus...
         Starting D-Bus Session Message Bus...
[   30.131793] systemd[1]: Starting Mount usb fs...
         Starting Mount usb fs...
[  OK  ] Started Set boot sequence config for temporary use.
[   30.137890] systemd[1]: Started Set boot sequence config for temporary use.
[  OK  ] Started Journal Service.
[   30.161674] systemd[1]: Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[   30.176270] tn40xx: Tehuti Network Driver, 0.3.6.14
[   30.176926] tn40xx: Supported phys : MV88X3120 MV88X3310 MV88E2010 QT2025 TLK10232 AQR105 
[  OK  ] Started check integrity of rd.gz decompression.
[   30.224316] systemd-journald[5759]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Mount usb fs.
[  OK  ] Started Synology Task Scheduler Init.
[   30.286455] qed_init called
[   30.286985] QLogic FastLinQ 4xxxx Core Module qed 8.33.9.0
[   30.287934] creating debugfs root node
[   30.290628] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.33.9.0
[   30.301966] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.36 ($DateTime: 2016/06/16 03:53:41 $)
[   30.352521] usbcore: registered new interface driver usb-storage
[  OK  ] Started Load Kernel Modules.
         Mounting Configuration File System...
         Starting Insert bnxt module...
         Starting Apply default and user cus... sysctl.conf kernel variable....
         Starting Load Fan Modules in Kernel Project...
         Starting Load Kernel Modules in Kernel Project...
[  OK  ] Mounted Configuration File System.
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Reached target Create SDK locks directory.
         Starting Synology Database Update...
         Starting Check Synology user info consistency...
         Starting Check Synology group info consistency...
         Starting Check /etc/synoinfo.conf...
         Starting synodsmnotify...
[  OK  ] Started synodsmnotify.
[   30.437759] usbcore: registered new interface driver usblp
[  OK  ] Started Insert bnxt module.
[   30.451515] synobios open /dev/ttyS1 success
[   30.452299] 2023-6-6 18:45:34 UTC
[   30.452755] synobios: load, major number 201
[   30.453412] Brand: Synology
[   30.453413] Model: Unknown
[   30.453414] set group disks wakeup number to 5, spinup time deno 1
[   30.453416] synobios cpu_arch proc entry initialized
[   30.453416] synobios crypto_hw proc entry initialized
[   30.453417] synobios syno_platform proc entry initialized
         Starting Adjust NIC sequence...
[  OK  ] Started D-Bus Session Message Bus.
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started Synology Database Update.
[   30.556278] AVX2 version of gcm_enc/dec engaged.
[   30.556952] AES CTR mode by8 optimization enabled
[   30.562486] led-lp3943 initial error: failed to get i2c adapter
[  OK  ] Started Load Kernel Modules in Kernel Project.
[  OK  ] Started Apply default and user cust...ed sysctl.conf kernel variable..
         Starting Apply Kernel Variables...
         Starting DSM Release Rolling Group ID...
         Starting Software Init Led for support led v2 models...
[  OK  ] Started DSM Release Rolling Group ID.
[   30.669877] Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
[  OK  ] Started Apply Kernel Variables.
         Starting Apply kernel variable vm.kswapd_threads...
         Starting Apply kernel variable vm.min-free-kbytes...
         Starting Apply kernel variable kernel-shmmni at least 16384...
         Starting Apply kernel variable kernel.sem at least 1024...
[  OK  ] Started Apply kernel variable kernel-shmmni at least 16384.
[  OK  ] Started Apply kernel variable vm.kswapd_threads.
[  OK  ] Started Check /etc/synoinfo.conf.
[  OK  ] Started Apply kernel variable kernel.sem at least 1024.
[  OK  ] Started Apply kernel variable vm.min-free-kbytes.
[FAILED] Failed to start Adjust NIC sequence.
See "systemctl status SynoInitEth.service" for details.
[   30.968450] Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
[   30.970478] Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
[  OK  ] Started Link coredump path to volume if possible.
[   31.458247] Module [adt7475] is removed. 
         Starting System Logger Daemon...
[  OK  ] Started Check Synology user info consistency.
[  OK  ] Started Check Synology group info consistency.
[  OK  ] Started Software Init Led for support led v2 models.
[  OK  ] Reached target User and Group Name Lookups.
         Starting Prepare notification cache data...
         Starting move domain or ldap user p...der to domain or ldap folder....
[  OK  ] Reached target Synology local user and group ready.
[  OK  ] Reached target Synology synoscheduler functions.
[  OK  ] Started move domain or ldap user pr...older to domain or ldap folder..
[  OK  ] Started Prepare notification cache data.
[  OK  ] Started System Logger Daemon.
[DEPEND] Dependency failed for rebuild local user and group db.
[  OK  ] Reached target Synology root filesystem (rw) ready.
         Starting Set Eunit Sequence...
         Starting DSM Installation ID...
[  OK  ] Reached target Network (Pre).
         Starting Set arp ignore...
         Starting Synology Network Daemon...
         Starting DSM Boot Health Check...
         Starting Load AppArmor profiles...
         Starting Clean UPS config...
         Starting Umount initrd...
         Starting Synology Default TLS Profile...
         Starting syno-cgi-keygen.service...
         Starting SAS early initial...
         Starting Synology check locale...
         Starting synodrnode...
         Starting Synology Log bootup start...
[  OK  ] Started Set Eunit Sequence.
[  OK  ] Started DSM Installation ID.
[  OK  ] Started Clean UPS config.
[  OK  ] Started SAS early initial.
         Starting Synology swap...
[  OK  ] Started Set arp ignore.
[  OK  ] Started Synology Log bootup start.
[  OK  ] Started Umount initrd.
[  OK  ] Started Synology check locale.
[  OK  ] Started Synology Default TLS Profile.
[   33.255288] zram: Added device: zram0
[   33.256277] zram: Added device: zram1
[   33.449614] md: md1 stopped.
[  OK  ] Started Synology Network Daemon.
         Starting Wait for Synology Network to be Configured...
[   33.607477] Module [adt7475] is removed. 
[  OK  ] Started Wait for Synology Network to be Configured.
         Starting Synology Network Event Daemon...
[  OK  ] Started Synology Network Event Daemon.
         Starting rc.network...
[   33.741256] md: bind<sdc2>
[   33.775858] md: bind<sdb2>
[   33.782889] md/raid1:md1: active with 2 out of 6 mirrors
[   33.803015] md1: detected capacity change from 0 to 2147418112
[  OK  ] Started syno-cgi-keygen.service.
[  OK  ] Started synodrnode.
[  OK  ] Started DSM Boot Health Check.
[   34.414803] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k 
[   34.421292] zram0: detected capacity change from 0 to 1231028224
[   34.431699] Adding 1202172k swap on /dev/zram0.  Priority:1 extents:1 across:1202172k SS
[   34.439858] zram1: detected capacity change from 0 to 1231028224
[   34.450335] Adding 1202172k swap on /dev/zram1.  Priority:1 extents:1 across:1202172k SS
[  OK  ] Started Synology swap.
         Starting udev Kernel Device Manager...
[  OK  ] Started Load AppArmor profiles.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Synology token manager.
         Starting Synology token manager...
[  OK  ] Started Synology task manager.
         Starting Synology task manager...
[  OK  ] Started Serial Getty on ttyS0.
         Starting Serial Getty on ttyS0...
[  OK  ] Reached target Login Prompts.
         Starting bootup upgrade sha package...
[  OK  ] Started bootup upgrade sha package.
[  OK  ] Found device /dev/synoboot2.
[  OK  ] Reached target Synology synoboot2 done.
[  OK  ] Reached target Basic System.
         Starting Write back disk latency to DB...
         Starting Synology firmware DLMC...
         Starting Arc force WoL on eth0...
         Starting synoconfd daemon...
         Starting Enable CPU Info...
         Starting always preprocess jobs before any package is started...
         Starting Synology log notification service...
         Starting Log Rotate Daemon...
         Starting Reload udev rules...
         Starting Hibernation debug check...
         Starting synoindex check if there a...ny synoindex-related packages...
         Starting WD idle3 timer...
         Starting Service for irq balance...
         Starting Synology Schedule Daemon...
         Starting Login Service...
         Starting Control RC power...
         Starting Synology filesytem check on bootup...
         Starting Samba Environment Setup Unit...
[  OK  ] Started synobackup daemon.
         Starting synobackup daemon...
[  OK  ] Started Synology log accounting service.
         Starting Synology log accounting service...
         Starting System Profile Tuning...
[  OK  ] Started Write back disk latency to DB.
[  OK  ] Started Synology firmware DLMC.
[  OK  ] Started Arc force WoL on eth0.
[  OK  ] Started synoconfd daemon.
[  OK  ] Started WD idle3 timer.
[  OK  ] Started Synology filesytem check on bootup.
         Starting Synology space service...
[  OK  ] Started Reload udev rules.
[  OK  ] Started Hibernation debug check.
[  OK  ] Started Login Service.
[  OK  ] Started Synology Schedule Daemon.
[  OK  ] Started Log Rotate Daemon.
[  OK  ] Stopped Synology Task Scheduler Vmtouch.
[  OK  ] Started Synology Task Scheduler Vmtouch.
         Starting Synology Task Scheduler Vmtouch...
[  OK  ] Started always preprocess jobs before any package is started.
[  OK  ] Reached target Hook on root ready.
         Starting SecureSignIn's service unit...
         Starting Python2's service unit...
         Starting SMBService's service unit...
         Starting ActiveInsight's service unit...
[  OK  ] Started Service for irq balance.
[  OK  ] Started Control RC power.
[FAILED] Failed to start synoindex check if ... any synoindex-related packages.
See "systemctl status synoindex-checkpackage.service" for details.
[DEPEND] Dependency failed for synoindexd.
[DEPEND] Dependency failed for synoindex notifyd.
[DEPEND] Dependency failed for synomkflvd.
[DEPEND] Dependency failed for synomkthumbd.
[DEPEND] Dependency failed for synoindex scand.
[DEPEND] Dependency failed for synoindex workerd.
[DEPEND] Dependency failed for synoindex plugind.
[DEPEND] Dependency failed for synoindex mediad.
[  OK  ] Started Samba Environment Setup Unit.
[   35.652815] Module [adt7475] is removed. 
[  OK  ] Started System Profile Tuning.
[  OK  ] Started Synology log notification service.
[  OK  ] Created slice system-dhclient.slice.
         Starting DHCP client init...
[  OK  ] Started DHCP client init.
         Starting eth0 DHCP Client...
[  OK  ] Stopped eth0-info DHCP Client v6.
[  OK  ] Stopped eth0-client DHCP Client v6.
[  OK  ] Started eth0 DHCP Client.
[  OK  ] Started Python2's service unit.
[  OK  ] Stopped eth0-pd DHCP Client v6.
[  OK  ] Started rc.network.
         Starting Set Multiple Geteway...
         Starting PPPoE...
         Starting Check if network is ready...
[  OK  ] Started PPPoE.
         Stopping Synology Task Scheduler Vmtouch...
[  OK  ] Stopped Synology Task Scheduler Vmtouch.
[  OK  ] Started Synology Task Scheduler Vmtouch.
         Starting Synology Task Scheduler Vmtouch...
[  OK  ] Started Load Fan Modules in Kernel Project.
[  OK  ] Started Enable CPU Info.
[  OK  ] Started SMBService's service unit.
[  OK  ] Started Set Multiple Geteway.
[  OK  ] Reached target Network.
         Starting Synology SCGI SocketIO...
         Starting findhost daemon...
         Starting Redis data structure server for webapi...
         Starting Network Time Service...
[  OK  ] Started findhost daemon.
         Stopping Synology Task Scheduler Vmtouch...
[  OK  ] Stopped Synology Task Scheduler Vmtouch.
[  OK  ] Started Synology Task Scheduler Vmtouch.
         Starting Synology Task Scheduler Vmtouch...
[  OK  ] Started Network Time Service.
[  OK  ] Started Redis data structure server for webapi.
[  OK  ] Started Synology SCGI.
         Starting Synology SCGI...
[  OK  ] Started Check if network is ready.
[  OK  ] Reached target Network is Online.
         Starting NetBIOS name server...
         Starting Entry for WS-Transfer and WS-Discovery Server...
         Starting Avahi daemon...
         Starting broadcast synorelayd boot state...
         Starting register ds region by ip...
         Starting VPN Client...
[  OK  ] Started Entry for WS-Transfer and WS-Discovery Server.
[   38.265872] md: md2 stopped.
[  OK  ] Started VPN Client.
[  OK  ] Started Avahi daemon.
[   38.409238] md: bind<sdc5>
[   38.418574] md: bind<sdb5>
[   38.419728] md/raid1:md2: active with 2 out of 2 mirrors
[  OK  ] Created slice system-dhclient6.slice.
         Starting eth0-info DHCP Client v6...
[   38.440974] md2: detected capacity change from 0 to 989220438016
[  OK  ] Started broadcast synorelayd boot state.
[  OK  ] Started eth0-info DHCP Client v6.
[  OK  ] Started ActiveInsight's service unit.
[  OK  ] Started SecureSignIn's service unit.
[  OK  ] Started NetBIOS name server.
[  OK  ] Started WS-Discovery Server.
         Starting WS-Discovery Server...
         Stopping Synology Task Scheduler Vmtouch...
[  OK  ] Stopped Synology Task Scheduler Vmtouch.
[  OK  ] Started Synology Task Scheduler Vmtouch.
         Starting Synology Task Scheduler Vmtouch...
[  OK  ] Started register ds region by ip.
[   39.891095] flashcache_syno: /dev/vg1/volume_1 exclude check success
[   40.554009] raid6: sse2x1   gen() 13925 MB/s
[   40.571008] raid6: sse2x1   xor() 10146 MB/s
[   40.588008] raid6: sse2x2   gen() 17425 MB/s
[   40.605006] raid6: sse2x2   xor() 11849 MB/s
[   40.622009] raid6: sse2x4   gen() 20296 MB/s

test-dsm login: [   40.639009] raid6: sse2x4   xor() 12216 MB/s
[   40.656008] raid6: avx2x1   gen() 28085 MB/s
[   40.673007] raid6: avx2x1   xor() 19587 MB/s
[   40.690008] raid6: avx2x2   gen() 33871 MB/s
[   40.707008] raid6: avx2x2   xor() 21675 MB/s
[   40.724007] raid6: avx2x4   gen() 38503 MB/s
[   40.741008] raid6: avx2x4   xor() 23240 MB/s
[   40.741629] raid6: using algorithm avx2x4 gen() 38503 MB/s
[   40.742437] raid6: .... xor() 23240 MB/s, rmw enabled
[   40.743180] raid6: using avx2x2 recovery algorithm
[   40.744330] xor: automatically using best checksumming function:
[   40.755007]    avx       : 27704.000 MB/sec
[   40.792625] Btrfs loaded, crc32c=crc32c-intel
[   40.799476] BTRFS: device label 2023.06.04-20:58:15 v42962 devid 1 transid 349 /dev/mapper/cachedev_0
[   40.803678] BTRFS info (device dm-2): enabling auto syno reclaim space
[   40.805065] BTRFS info (device dm-2): use ssd allocation scheme
[   40.805948] BTRFS info (device dm-2): using free space tree
[   40.806682] BTRFS info (device dm-2): using free block group cache tree
[   40.807538] BTRFS info (device dm-2): has skinny extents
[   40.850504] BTRFS info (device dm-2): BTRFS: root of syno feature tree is null
[   43.509414] Synotify use 16384 event queue size
[   43.511134] Synotify use 16384 event queue size
[   44.415083] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use)
[   44.551643] ata2.00: configured for UDMA/100
[   44.552271] ata2: EH complete
[   44.693615] ata3.00: configured for UDMA/100
[   44.694225] ata3: EH complete
[   45.044591] ext2: synoboot2 mounted, process=synopkicompatsy
[   45.047185] EXT2-fs (synoboot2): warning: mounting unchecked fs, running e2fsck is recommended
[   45.053626] synoboot2 unmounted, process=synopkicompatsy
[   45.569160] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[   46.602958] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(4ab6e113a1d2).
[   46.609183] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
[   46.626647] iSCSI:target_core_device.c:613:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[   46.628338] iSCSI:target_core_configfs.c:5777:target_init_dbroot db_root: cannot open: /etc/target
[   46.629742] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[   46.647836] iSCSI:target_core_file.c:152:fd_attach_hba RODSP plugin for fileio is enabled.
[   46.650746] iSCSI:target_core_file.c:159:fd_attach_hba ODX Token Manager is enabled.
[   46.655448] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
[   46.657048] iSCSI:target_core_ep.c:795:ep_attach_hba RODSP plugin for epio is enabled.
[   46.658196] iSCSI:target_core_ep.c:802:ep_attach_hba ODX Token Manager is enabled.
[   46.799621] workqueue: max_active 1024 requested for vhost_scsi is out of range, clamping between 1 and 512
[   46.999284] iSCSI:qla_dbg.c:2605:ql_log qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k.
[   47.019708] [12979]: ocs_fc_lio: ocs_scsi_ini_driver_init:1104::disabling the app heartbeat timeout detection
[   47.021103] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1225::ocs_fc_lio: driver version 12.2.385.0
[   47.022408] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1227::  Module parameters:
[   47.023499] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1228::  Initiator = 0
[   47.024496] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1229::  Target = 1
[   47.025454] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1230::  ctrlmask = 0x000a
[   47.026498] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1231::  loglevel = 5
[   47.027478] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1232::  logmask = 0x0000
[   47.028514] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1233::  ramlog_size = 1048576
[   47.029594] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1234::  rq_threads = 0
[   47.030607] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1235::  wwn_bump = 0
[   47.031592] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1236::  topology = 0
[   47.032586] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1237::  speed = 0
[   47.033780] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1238::  holdoff_link_online = 2
[   47.034957] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1239::  enable_hlm = 0
[   47.035967] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1240::  hlm_group_size = 8
[   47.037017] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1241::  max_remote_nodes = 2048
[   47.038122] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1242::  ethernet_license = 0
[   47.039190] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1243::  num_scsi_ios = 8192
[   47.040249] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1244::  dif_separate = 0
[   47.041276] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1245::  tow_feature = 0
[   47.042293] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1246::  tow_io_size = 65536
[   47.043352] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1247::  tow_xri_cnt = 512
[   47.044390] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1248::  queue_topology = eq cq rq cq mq $nulp($nwq(cq wq:ulp=$rpt1)) cq wq:len=256:class=1
[   47.046140] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1249::  rq_selection_policy = 0
[   47.047236] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1250::  rr_quanta = 1
[   47.048231] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1251::  filter_ref = 0,0,0,0
[   47.049299] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1252::  cq_process_limit = 64
[   47.050379] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1253::  explicit_buffer_list = 0
[   47.051486] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1254::  external_loopback = 0
[   47.052563] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1255::  target_io_timer = 0
[   47.053622] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1256::  target_wqe_timer = 30
[   47.054700] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1257::  ddump_saved_size = 0
[   47.055768] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1258::  hal_war_version = (null)
[   47.056879] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1259::  hw_cmpl_context = 1
[   47.057939] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1260::  watchdog_timeout = 0
[   47.059007] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1261::  heartbeat_cpu_mask = 0x0
[   47.060117] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1262::  sliport_healthcheck = 0
[   47.061215] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1263::  disable_fec = 0
[   47.062229] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1264::  enable_dpp = 1
[   47.063230] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1265::  sliport_pause_errors = disabled
[   47.064413] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1266::  enable_bbcr = 1
[   47.065427] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1267::  fw_dump_type = 1
[   47.066462] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1268::  enable_auto_recovery = 0
[   47.067577] [12979]: ocs_fc_lio: ocs_driver_print_module_params:1269::  cfg_suppress_rsp = 1
[   47.069812] [12980]: ocs_fc_lio: ocs_thread_thunk:1046::ocs_proxy running
[   47.262042] 8021q: 802.1Q VLAN Support v1.8
[   47.262711] 8021q: adding VLAN 0 to HW filter on device eth0
[   50.409611] fuse init (API version 7.23)
AuxXxilium commented 1 year ago

Issue: [ 30.453412] Brand: Synology [ 30.453413] Model: Unknown

Explain: Your Model is not recognized by System

[ 16.038492] Brand: Synology [ 16.039059] Model: DS-3622xs+

This is the correct information in Log.

Note: [ 9.281609] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 9.283262] ACPI: Power Button [PWRF] [ 9.351578] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10

Button is loaded correctly.

Installing daemon for ACPI button '/etc/acpi/events/power' -> '/tmpRoot/etc/acpi/events/power' '/usr/sbin/acpid' -> '/tmpRoot/usr/sbin/acpid' '/etc/acpi/power.sh' -> '/tmpRoot/etc/acpi/power.sh' '/tmpRoot/lib/systemd/system/multi-user.target.wants/acpid.service' -> '/usr/lib/systemd/system/acpid.service'

And service is linked

andreheuer commented 1 year ago

Ok, I have now changed the model to 3622xs+ and reinstalled DSM.

The model is now recongnized as 3622xs+ and power button is installed. However, the shutdown button is still not working :-(

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.180+ (root@build6) (gcc version 8.5.0 (GCC) ) #42962 SMP Sat Apr 8 00:14:23 CST 2023
[    0.000000] Command line: withefi synoboot_satadom=1 dom_szmax=1034 console=ttyS0,115200n8 earlyprintk earlycon=uart8250,io,0x3f8,115200n8 root=/dev/md0 loglevel=15 log_buf_len=32M syno_hw_version=DS3622xs+ netif_num=1 pid=0x0000 mac1=001132FA6CD4 sn=2150SQRW1ZAHH vid=0x0000 elevator=elevator HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 SataPortMap=3
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  960, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000400-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000000805fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000806000-0x0000000000807fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000808000-0x000000000080ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000810000-0x00000000008fffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000900000-0x00000000bec7dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bec7e000-0x00000000bed7ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bed80000-0x00000000bf6ebfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf6ec000-0x00000000bf96bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf96c000-0x00000000bf97dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf97e000-0x00000000bf9fdfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf9fe000-0x00000000bfeebfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfeec000-0x00000000bff6ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bff70000-0x00000000bfffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] earlycon: Early serial console at I/O port 0x3f8 (options '115200n8')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x00102000-0x0010202f] usable ==> usable
[    0.000000] e820: update [mem 0x00100000-0x0010006f] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000400-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000000010006f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000100070-0x0000000000101fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000102000-0x000000000010202f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000102030-0x0000000000805fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000806000-0x0000000000807fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000000808000-0x000000000080ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000810000-0x00000000008fffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000000900000-0x00000000bec7dfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bec7e000-0x00000000bed7ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bed80000-0x00000000bf6ebfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bf6ec000-0x00000000bf96bfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bf96c000-0x00000000bf97dfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000bf97e000-0x00000000bf9fdfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000bf9fe000-0x00000000bfeebfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bfeec000-0x00000000bff6ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bff70000-0x00000000bfffffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] efi: EFI v2.70 by EFI Development Kit II / OVMF
[    0.000000] efi:  SMBIOS=0xbf720000  ACPI=0xbf97d000  ACPI 2.0=0xbf97d014 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 3.20230228-2 04/04/2023
[    0.000000] Kernel/User page tables isolation: disabled
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 7000000000 mask 7000000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xbfeec max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 28672
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x13cd55000, 0x13cd55fff] PGTABLE
[    0.000000] BRK [0x13cd56000, 0x13cd56fff] PGTABLE
[    0.000000] BRK [0x13cd57000, 0x13cd57fff] PGTABLE
[    0.000000] BRK [0x13cd58000, 0x13cd58fff] PGTABLE
[    0.000000] BRK [0x13cd59000, 0x13cd59fff] PGTABLE
[    0.000000] BRK [0x13cd5a000, 0x13cd5afff] PGTABLE
[    0.000000] log_buf_len: 33554432 bytes
[    0.000000] early log buf free: 1041884(99%)
[    0.000000] RAMDISK: [mem 0x138cfb000-0x13c1fffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000BF97D014 000024 (v02 BOCHS )
[    0.000000] ACPI: XSDT 0x00000000BF97C0E8 000054 (v01 BOCHS  BXPC     00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000BF977000 000074 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000BF978000 003D26 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000BF9DB000 000040
[    0.000000] ACPI: APIC 0x00000000BF976000 000080 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: SSDT 0x00000000BF975000 0000CA (v01 BOCHS  VMGENID  00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000BF974000 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: WAET 0x00000000BF973000 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: BGRT 0x00000000BF972000 000038 (v01 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000000805fff]
[    0.000000]   node   0: [mem 0x0000000000808000-0x000000000080ffff]
[    0.000000]   node   0: [mem 0x0000000000900000-0x00000000bec7dfff]
[    0.000000]   node   0: [mem 0x00000000bed80000-0x00000000bf6ebfff]
[    0.000000]   node   0: [mem 0x00000000bf9fe000-0x00000000bfeebfff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1046917
[    0.000000]   DMA zone: 59 pages used for memmap
[    0.000000]   DMA zone: 26 pages reserved
[    0.000000]   DMA zone: 3757 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12204 pages used for memmap
[    0.000000]   DMA32 zone: 781016 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x00100000-0x00100fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00102000-0x00102fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00806000-0x00807fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00810000-0x008fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbec7e000-0xbed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf6ec000-0xbf96bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf96c000-0xbf97dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf97e000-0xbf9fdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfeec000-0xbff6ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff70000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfeffbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xfeffbfff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88013dc00000 s95192 r8192 d31784 u1048576
[    0.000000] pcpu-alloc: s95192 r8192 d31784 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030532
[    0.000000] Kernel command line: withefi synoboot_satadom=1 dom_szmax=1034 console=ttyS0,115200n8 earlyprintk earlycon=uart8250,io,0x3f8,115200n8 root=/dev/md0 loglevel=15 log_buf_len=32M syno_hw_version=DS3622xs+ netif_num=1 pid=0x0000 mac1=001132FA6CD4 sn=2150SQRW1ZAHH vid=0x0000 elevator=elevator HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 SataPortMap=3
[    0.000000] Synology boot device SATADOM: 1
[    0.000000] Synology Hardware Version: DS3622xs+
[    0.000000] Internal netif num: 1
[    0.000000] Mac1: 001132FA6CD4
[    0.000000] Serial Number: 2150SQRW1ZAHH
[    0.000000] Disk Index Map: 00
[    0.000000] SYNO GPIO HDD detect pin: 0
[    0.000000] Vender format version: 2
[    0.000000] Power on seq num: 0
[    0.000000] Sata Port Map: 3
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 3950384K/4187668K available (5549K kernel code, 880K rwdata, 1780K rodata, 924K init, 1568K bss, 237284K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:4352 nr_irqs:440 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] bootconsole [uart0] disabled
[    0.000000] bootconsole [uart0] disabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3311.943 MHz processor
[    0.003004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6623.88 BogoMIPS (lpj=3311943)
[    0.004385] pid_max: default: 32768 minimum: 301
[    0.005010] ACPI: Core revision 20150930
[    0.007985] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.009128] Security Framework initialized
[    0.009723] AppArmor: AppArmor initialized
[    0.010007] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.011003] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.012210] Initializing cgroup subsys io
[    0.012759] Initializing cgroup subsys memory
[    0.013012] Initializing cgroup subsys devices
[    0.014006] Initializing cgroup subsys freezer
[    0.015044] CPU: Physical Processor ID: 0
[    0.015569] CPU: Processor Core ID: 0
[    0.029025] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.029924] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.030009] Speculative Store Bypass: Vulnerable
[    0.034073] Freeing SMP alternatives memory: 24K
[    0.035028] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.037310] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.047221] TSC deadline timer enabled
[    0.047805] smpboot: CPU0: Intel(R) Xeon(R) E-2124 CPU @ 3.30GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[    0.048225] Performance Events: generic architected perfmon, full-width counters, Intel PMU driver.
[    0.049250] ... version:                2
[    0.049757] ... bit width:              48
[    0.050001] ... generic registers:      8
[    0.050514] ... value mask:             0000ffffffffffff
[    0.051001] ... max period:             00007fffffffffff
[    0.051673] ... fixed-purpose events:   3
[    0.052001] ... event mask:             00000007000000ff
[    0.052946] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.054066] x86: Booting SMP configuration:
[    0.054623] .... node  #0, CPUs:      #1
[    0.068028] x86: Booted up 1 node, 2 CPUs
[    0.068599] smpboot: Total of 2 processors activated (13247.77 BogoMIPS)
[    0.069238] devtmpfs: initialized
[    0.070272] PM: Registering ACPI NVS region [mem 0x00806000-0x00807fff] (8192 bytes)
[    0.071014] PM: Registering ACPI NVS region [mem 0x00810000-0x008fffff] (983040 bytes)
[    0.071995] PM: Registering ACPI NVS region [mem 0xbf97e000-0xbf9fdfff] (524288 bytes)
[    0.073007] PM: Registering ACPI NVS region [mem 0xbff70000-0xbfffffff] (589824 bytes)
[    0.074070] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.076007] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.077183] NET: Registered protocol family 16
[    0.082024] cpuidle: using governor ladder
[    0.086013] cpuidle: using governor menu
[    0.086678] ACPI: bus type PCI registered
[    0.088030] PCI: Using configuration type 1 for base access
[    0.094118] ACPI: Added _OSI(Module Device)
[    0.094689] ACPI: Added _OSI(Processor Device)
[    0.095000] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.096015] ACPI: Added _OSI(Processor Aggregator Device)
[    0.098271] ACPI: Interpreter enabled
[    0.098754] ACPI: (supports S0 S4 S5)
[    0.099002] ACPI: Using IOAPIC for interrupt routing
[    0.100003] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.106097] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.107004] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.107005] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.107834] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.110046] PCI host bridge to bus 0000:00
[    0.110617] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.111003] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.111874] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.113003] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.113957] pci_bus 0000:00: root bus resource [mem 0x7000000000-0x707fffffff window]
[    0.115003] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.115733] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.117007] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.118001] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.120004] pci 0000:00:01.1: reg 0x20: [io  0x10e0-0x10ef]
[    0.121000] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.122003] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.122810] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.124002] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.125008] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
[    0.128004] pci 0000:00:01.2: reg 0x20: [io  0x1080-0x109f]
[    0.129778] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.129778] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[    0.130013] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[    0.132218] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.135330] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff pref]
[    0.137037] pci 0000:00:02.0: reg 0x18: [mem 0xc1643000-0xc1643fff]
[    0.140528] pci 0000:00:02.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.142206] pci 0000:00:03.0: [1af4:1002] type 00 class 0x00ff00
[    0.143618] pci 0000:00:03.0: reg 0x10: [io  0x1000-0x103f]
[    0.146005] pci 0000:00:03.0: reg 0x20: [mem 0x7030000000-0x7030003fff 64bit pref]
[    0.149002] pci 0000:00:05.0: [1b36:0001] type 01 class 0x060400
[    0.151004] pci 0000:00:05.0: reg 0x10: [mem 0x703000e000-0x703000e0ff 64bit]
[    0.153350] pci 0000:00:07.0: [8086:2922] type 00 class 0x010601
[    0.156220] pci 0000:00:07.0: reg 0x20: [io  0x10a0-0x10bf]
[    0.158231] pci 0000:00:07.0: reg 0x24: [mem 0xc1642000-0xc1642fff]
[    0.159006] pci 0000:00:08.0: [1af4:1003] type 00 class 0x078000
[    0.160347] pci 0000:00:08.0: reg 0x10: [io  0x1040-0x107f]
[    0.162635] pci 0000:00:08.0: reg 0x14: [mem 0xc1641000-0xc1641fff]
[    0.165627] pci 0000:00:08.0: reg 0x20: [mem 0x7030004000-0x7030007fff 64bit pref]
[    0.168126] pci 0000:00:12.0: [1af4:1000] type 00 class 0x020000
[    0.169568] pci 0000:00:12.0: reg 0x10: [io  0x10c0-0x10df]
[    0.170535] pci 0000:00:12.0: reg 0x14: [mem 0xc1640000-0xc1640fff]
[    0.174004] pci 0000:00:12.0: reg 0x20: [mem 0x7030008000-0x703000bfff 64bit pref]
[    0.176649] pci 0000:00:12.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
[    0.178003] pci 0000:00:1e.0: [1b36:0001] type 01 class 0x060400
[    0.178590] pci 0000:00:1e.0: reg 0x10: [mem 0x703000d000-0x703000d0ff 64bit]
[    0.181002] pci 0000:00:1f.0: [1b36:0001] type 01 class 0x060400
[    0.181598] pci 0000:00:1f.0: reg 0x10: [mem 0x703000c000-0x703000c0ff 64bit]
[    0.184228] pci 0000:00:05.0: PCI bridge to [bus 01]
[    0.185019] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.185826] pci 0000:00:05.0:   bridge window [mem 0xc1400000-0xc15fffff]
[    0.187029] pci 0000:00:05.0:   bridge window [mem 0x7000000000-0x700fffffff 64bit pref]
[    0.188602] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.189017] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.189830] pci 0000:00:1e.0:   bridge window [mem 0xc1200000-0xc13fffff]
[    0.189830] pci 0000:00:1e.0:   bridge window [mem 0x7010000000-0x701fffffff 64bit pref]
[    0.190000] pci 0000:00:1f.0: PCI bridge to [bus 03]
[    0.190000] pci 0000:00:1f.0:   bridge window [io  0xc000-0xcfff]
[    0.190000] pci 0000:00:1f.0:   bridge window [mem 0xc1000000-0xc11fffff]
[    0.190000] pci 0000:00:1f.0:   bridge window [mem 0x7020000000-0x702fffffff 64bit pref]
[    0.192771] pci_bus 0000:00: on NUMA node 0
[    0.193256] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0, disabled.
[    0.194321] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.195148] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *10 11)
[    0.196005] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.196858] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.198022] ACPI: Enabled 3 GPEs in block 00 to 0F
[    0.199169] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.199791] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.201005] vgaarb: loaded
[    0.201350] vgaarb: bridge control possible 0000:00:02.0
[    0.202105] SCSI subsystem initialized
[    0.202653] libata version 3.00 loaded.
[    0.203035] pps_core: LinuxPPS API ver. 1 registered
[    0.204197] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.205017] PTP clock support registered
[    0.205544] EDAC MC: Ver: 3.0.0
[    0.206235] EFI Variables Facility v0.08 2004-May-17
[    0.207559] pstore: Registered efi as persistent store backend
[    0.208194] PCI: Using ACPI for IRQ routing
[    0.208599] PCI: pci_cache_line_size set to 64 bytes
[    0.210005] e820: reserve RAM buffer [mem 0x00102000-0x001fffff]
[    0.210005] e820: reserve RAM buffer [mem 0x00806000-0x008fffff]
[    0.211003] e820: reserve RAM buffer [mem 0x00810000-0x008fffff]
[    0.212061] e820: reserve RAM buffer [mem 0xbec7e000-0xbfffffff]
[    0.213003] e820: reserve RAM buffer [mem 0xbf6ec000-0xbfffffff]
[    0.213754] e820: reserve RAM buffer [mem 0xbfeec000-0xbfffffff]
[    0.214298] clocksource: Switched to clocksource hpet
[    0.219537] AppArmor: AppArmor Filesystem Enabled
[    0.220210] pnp: PnP ACPI init
[    0.220675] pnp 00:00: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.221562] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.222493] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.223461] pnp 00:03: [dma 2]
[    0.223969] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.224867] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.225957] pnp: PnP ACPI: found 5 devices
[    0.231906] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.233068] pci 0000:00:02.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.234360] pci 0000:00:12.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
[    0.236507] pci 0000:00:12.0: BAR 6: assigned [mem 0xc1600000-0xc163ffff pref]
[    0.237462] pci 0000:00:02.0: BAR 6: assigned [mem 0xc1650000-0xc165ffff pref]
[    0.238452] pci 0000:00:05.0: PCI bridge to [bus 01]
[    0.239117] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.240288] pci 0000:00:05.0:   bridge window [mem 0xc1400000-0xc15fffff]
[    0.241652] pci 0000:00:05.0:   bridge window [mem 0x7000000000-0x700fffffff 64bit pref]
[    0.243201] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.243850] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.245044] pci 0000:00:1e.0:   bridge window [mem 0xc1200000-0xc13fffff]
[    0.246168] pci 0000:00:1e.0:   bridge window [mem 0x7010000000-0x701fffffff 64bit pref]
[    0.247703] pci 0000:00:1f.0: PCI bridge to [bus 03]
[    0.248406] pci 0000:00:1f.0:   bridge window [io  0xc000-0xcfff]
[    0.249543] pci 0000:00:1f.0:   bridge window [mem 0xc1000000-0xc11fffff]
[    0.250664] pci 0000:00:1f.0:   bridge window [mem 0x7020000000-0x702fffffff 64bit pref]
[    0.252688] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.253537] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.254498] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.255555] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.256564] pci_bus 0000:00: resource 8 [mem 0x7000000000-0x707fffffff window]
[    0.257638] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.258533] pci_bus 0000:01: resource 1 [mem 0xc1400000-0xc15fffff]
[    0.259467] pci_bus 0000:01: resource 2 [mem 0x7000000000-0x700fffffff 64bit pref]
[    0.260555] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.261628] pci_bus 0000:02: resource 1 [mem 0xc1200000-0xc13fffff]
[    0.262485] pci_bus 0000:02: resource 2 [mem 0x7010000000-0x701fffffff 64bit pref]
[    0.263545] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.264311] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc11fffff]
[    0.265168] pci_bus 0000:03: resource 2 [mem 0x7020000000-0x702fffffff 64bit pref]
[    0.266247] NET: Registered protocol family 2
[    0.266948] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.268044] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.269262] TCP: Hash tables configured (established 32768 bind 32768)
[    0.270180] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.270978] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.272041] NET: Registered protocol family 1
[    0.272607] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.273463] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.290456] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.310078] pci 0000:00:02.0: Video device with shadowed ROM
[    0.310874] PCI: CLS 0 bytes, default 64
[    1.115157] Trying to unpack rootfs image as initramfs...
[    1.135810] Freeing initrd memory: 54292K
[    1.138125] redpill: loading out-of-tree module taints kernel.
[    1.139080] redpill: module verification failed: signature and/or required key missing - tainting kernel
[    1.155477] PCI host bridge to bus 0001:09
[    1.156149] pci_bus 0001:09: root bus resource [io  0x0000-0xffff]
[    1.156949] pci_bus 0001:09: root bus resource [mem 0x00000000-0x7fffffffff]
[    1.157990] pci_bus 0001:09: root bus resource [bus 00-ff]
[    1.158791] pci 0001:09:00.0: [1b4b:9235] type 00 class 0x010601
[    1.159657] pci 0001:09:00.0: Can't map mv9235 registers
[    1.160455] PCI host bridge to bus 0001:0c
[    1.161093] pci_bus 0001:0c: root bus resource [io  0x0000-0xffff]
[    1.161889] pci_bus 0001:0c: root bus resource [mem 0x00000000-0x7fffffffff]
[    1.162854] pci_bus 0001:0c: busn_res: can not insert [bus 0c-ff] under domain [bus 00-ff] (conflicts with (null) [bus 09-ff])
[    1.164336] pci_bus 0001:0c: root bus resource [bus 00-ff]
[    1.165080] pci 0001:0c:00.0: [1b4b:9235] type 00 class 0x010601
[    1.165879] pci 0001:0c:00.0: Can't map mv9235 registers
[    1.177587] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.178649] software IO TLB: mapped [mem 0xb9f37000-0xbdf37000] (64MB)
[    1.180088] audit: initializing netlink subsys (disabled)
[    1.180842] audit: type=2000 audit(1686079119.180:1): initialized
[    1.181849] Initialise system trusted keyring
[    1.206976] VFS: Disk quotas dquot_6.6.0
[    1.208050] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.360553] Key type asymmetric registered
[    1.361937] Asymmetric key parser 'x509' registered
[    1.363399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.366513] io scheduler noop registered
[    1.368284] io scheduler deadline registered
[    1.370063] io scheduler cfq registered (default)
[    1.376332] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.404217] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.973183] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.978526] brd: module loaded
[    1.979840] Loading iSCSI transport class v2.0-870.
[    1.990378] rdac: device handler registered
[    2.030099] i2c /dev entries driver
[    2.031493] ahci 0000:00:07.0: version 3.0
[    2.050111] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[    2.052569] ahci 0000:00:07.0: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    2.055521] ahci 0000:00:07.0: flags: 64bit ncq only 
[    2.100635] scsi host0: ahci
[    2.103189] scsi host1: ahci
[    2.106734] scsi host2: ahci
[    2.108098] ata1: SATA max UDMA/133 abar m4096@0xc1642000 port 0xc1642100 irq 24
[    2.111168] ata2: SATA max UDMA/133 abar m4096@0xc1642000 port 0xc1642180 irq 24
[    2.114042] ata3: SATA max UDMA/133 abar m4096@0xc1642000 port 0xc1642200 irq 24
[    2.116788] ahci: probe of 0001:09:00.0 failed with error -22
[    2.118905] ahci: probe of 0001:0c:00.0 failed with error -22
[    2.124253] rtc_cmos 00:04: RTC can wake from S4
[    2.133988] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.135181] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    2.138355] md: raid1 personality registered for level 1
[    2.139552] NET: Registered protocol family 17
[    2.140208] Key type dns_resolver registered
[    2.141356] mce: Using 10 MCE banks
[    2.146306] registered taskstats version 1
[    2.146893] Loading compiled-in untrusted X.509 certificates
[    2.147709] Loading compiled-in X.509 certificates
[    2.148426] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[    2.162408] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[    2.164359] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[    2.166486] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[    2.168172] page_owner is disabled
[    2.169267] AppArmor: AppArmor sha1 policy hashing enabled
[    2.173881] rtc_cmos 00:04: setting system clock to 2023-06-06 19:18:40 UTC (1686079120)
[    2.180105] tsc: Refined TSC clocksource calibration: 3311.978 MHz
[    2.180897] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fbd7ff1d24, max_idle_ns: 440795374768 ns
[    2.427720] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.432934] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.437271] ata2.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[    2.440685] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.446170] ata2.00: SN:QM00007
[    2.448620] ata2.00: applying bridge limits
[    2.451124] ata3.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[    2.454471] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.458641] ata3.00: SN:QM00009
[    2.460246] ata3.00: applying bridge limits
[    2.462825] ata2.00: configured for UDMA/100
[    2.465544] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.469331] ata3.00: configured for UDMA/100
[    2.471619] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[    2.475149] ata1.00: 2097152 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.479297] ata1.00: SN:QM00005
[    2.481098] ata1.00: applying bridge limits
[    2.483674] ata1.00: configured for UDMA/100
[    2.486160] ata1.00: Find SSD disks. [QEMU HARDDISK]
[    2.490799] scsi 0:0:0:0: Direct-Access     QEMU     HARDDISK                 2.5+ PQ: 0 ANSI: 5
[    2.496371] ata2.00: Find SSD disks. [QEMU HARDDISK]
[    2.498978] sd 0:0:0:0: [synoboot] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[    2.503153] sd 0:0:0:0: [synoboot] Write Protect is off
[    2.505686] sd 0:0:0:0: [synoboot] Mode Sense: 00 3a 00 00
[    2.513783] scsi 1:0:0:0: Direct-Access     QEMU     HARDDISK                 2.5+ PQ: 0 ANSI: 5
[    2.521898] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.525577] hrtimer: interrupt took 3158140 ns
[    2.534147] ata3.00: Find SSD disks. [QEMU HARDDISK]
[    2.541285] scsi 2:0:0:0: Direct-Access     QEMU     HARDDISK                 2.5+ PQ: 0 ANSI: 5
[    2.547803] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.551839] sd 2:0:0:0: [sdc] Write Protect is off
[    2.553837] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.557808] sd 0:0:0:0: [synoboot] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.568772] sd 1:0:0:0: [sdb] Write Protect is off
[    2.570726] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.574703] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.590358] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.594737]  synoboot: synoboot1 synoboot2 synoboot3
[    2.600325]  sdc: sdc1 sdc2 sdc3 < sdc5 >
[    2.602230] sd 0:0:0:0: [synoboot] Attached SCSI disk
[    2.604154] sd 2:0:0:0: [sdc] Attached SCSI disk
[    2.607491]  sdb: sdb1 sdb2 sdb3 < sdb5 >
[    2.610666] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.613500] Freeing unused kernel memory: 924K
[    2.614628] Write protecting the kernel read-only data: 8192k
[    2.616602] Freeing unused kernel memory: 584K
[    2.618289] Freeing unused kernel memory: 268K
START /linuxrc.syno
START /linuxrc.syno.impl
[    2.790051] random: nonblocking pool is initialized
addons.sh called with params early
MajorVersion:7 MinorVersion:1
Insert Marvell 1475 SATA controller driver
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore[    2.846938] ACPI: bus type USB registered
[    2.847755] usbcore: registered new interface driver usbfs
[    2.848630] usbcore: registered new interface driver hub
[    2.849713] usbcore: registered new interface driver ethub
[    2.850586] usbcore: registered new device driver usb
 ... [  OK  ]
:: Loading module ehci-hcd[    2.865204] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ... [  OK  ]
:: Loadi[    2.869128] ehci-pci: EHCI PCI platform driver
ng module ehci-pci ... [  OK  ]
:: Loading module uhci-hcd[    2.876101] uhci_hcd: USB Universal Host Controller Interface driver
[    2.893379] uhci_hcd 0000:00:01.2: UHCI Host Controller
[    2.894089] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[    2.895164] uhci_hcd 0000:00:01.2: irq 11, io base 0x00001080
[    2.896412] hub 1-0:1.0: USB hub found
[    2.897590] hub 1-0:1.0: 2 ports detected
 ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module xhci-pci ... [  OK  ]
addons.sh called with params modules
MajorVersion:7 MinorVersion:1
Starting eudev daemon - modules
depmod: WARNING: could not open modules.order at /lib/modules: No such file or directory
depmod: WARNING: could not open modules.builtin at /lib/modules: No such file or directory
depmod: WARNING: could not open modules.builtin.modinfo at /lib/modules: No such file or directory
[    3.050943] udevd[4679]: starting version 3.2.11
[    3.051986] udevd[4679]: specified group 'tty' unknown
[    3.052722] udevd[4679]: specified group 'dialout' unknown
[    3.053471] udevd[4679]: specified group 'kmem' unknown
[    3.054197] udevd[4679]: specified group 'input' unknown
[    3.054893] udevd[4679]: specified group 'video' unknown
[    3.055639] udevd[4679]: specified group 'sgx' unknown
[    3.056348] udevd[4679]: specified group 'audio' unknown
[    3.057165] udevd[4679]: specified group 'disk' unknown
[    3.057839] udevd[4679]: specified group 'cdrom' unknown
[    3.058733] udevd[4679]: specified group 'tape' unknown
[    3.059809] udevd[4679]: specified group 'kvm' unknown
[    3.061908] udevd[4680]: starting eudev-3.2.11
Triggering add events to udev
[    3.064420] udevd[4680]: specified group 'tty' unknown
[    3.066070] udevd[4680]: specified group 'dialout' unknown
[    3.068421] udevd[4680]: specified group 'kmem' unknown
[    3.069646] udevd[4680]: specified group 'input' unknown
[    3.070389] udevd[4680]: specified group 'video' unknown
[    3.071148] udevd[4680]: specified group 'sgx' unknown
[    3.071854] udevd[4680]: specified group 'audio' unknown
[    3.072638] udevd[4680]: specified group 'disk' unknown
[    3.073361] udevd[4680]: specified group 'cdrom' unknown
[    3.074132] udevd[4680]: specified group 'tape' unknown
[    3.074874] udevd[4680]: specified group 'kvm' unknown
[    3.090662] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    3.091667] ACPI: Power Button [PWRF]
[    3.096476] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    3.098389] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.099139] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.162235] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[    3.182276] clocksource: Switched to clocksource tsc
[    3.244015] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    3.265081] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    3.457225] usbcore: registered new interface driver usbhid
[    3.459745] usbhid: USB HID core driver
[    3.463541] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3
[    3.467624] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
Insert net driver(Mindspeed only)...
[   13.523421] broadwellnk_synobios: module license 'Synology Inc.' taints kernel.
[   13.525242] Disabling lock debugging due to kernel taint
[   13.537345] synobios open /dev/ttyS1 success
[   13.538640] 2023-6-6 19:18:52 UTC
[   13.539473] synobios: load, major number 201
[   13.540392] Brand: Synology
[   13.540925] Model: DS-3622xs+
[   13.541616] set group disks wakeup number to 4, spinup time deno 7
[   13.543633] synobios cpu_arch proc entry initialized
[   13.544579] synobios crypto_hw proc entry initialized
[   13.545507] synobios syno_platform proc entry initialized
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfge[   13.551904] Module [broadwellnk_synobios] is removed. 
n[   13.552645] synobios: unload
 returns 0
addons.sh called with params patches
MajorVersion:7 MinorVersion:1
Adjust disks related configs automatically - patches
set maxdisks=6
set internalportcfg=0x3f
get esataportcfg=0
set usbportcfg=0xf00000
maxdisks=6
internalportcfg=0x3f
esataportcfg=0
usbportcfg=0xf00000
Insert synorbd kernel module
Insert synofsbd kernel module
Insert sha256 kernel module
All disk ready or timeout execeed
Assemble args: -u ede46874:0e6b19c2:05d949f7:b0bb[   13.648047] md: md0 stopped.
aec7 /dev/sdb1 /dev/sdc1
[   13.682479] md: bind<sdc1>
[   13.685614] md: bind<sdb1>
[   13.690639] md/raid1:md0: active with 2 out of 6 mirrors
[   13.708110] md0: detected capacity change from 0 to 8589869056
mdadm: /dev/md0 has been started with 2 drives (out of 6).
Partition Version=9
[   13.926265] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   14.022453] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
 /sbin/e2fsck exists, checking /dev/md0... 
e2fsck 1.44.1 (24-Mar-2018)
/sbin/e2fsck -yvf returns 0
Mounting /dev/md0 /tmpRoot
[   14.952434] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   14.978090] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota
------------upgrade
Begin upgrade procedure
[   15.083171] loop: module loaded
[   15.164157] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities
[   15.274164] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
Failed to found any patch
No upgrade file found
============upgrade
------------bootup-smallupdate
mkdir: can't create directory '/tmpRoot/proc': File exists
mkdir: can't create directory '/tmpRoot/sys': File exists
mkdir: can't create directory '/tmpRoot/dev': File exists
Try bootup smallupdate
No patch exist. Skip Packed Bootup SmallUpdate
Sparse files don't exist. Skip Sparse Bootup SmallUpdate
Finished synoautonano
============bootup-smallupdate
Wait 2 seconds for synology manufactory device
Tue Jun  6 19:18:58 UTC 2023
addons.sh called with params jrExit
MajorVersion:7 MinorVersion:1
/dev/md0 /tmpRoot ext4 rw,relatime,prjquota,rootprjquota,data=ordered 0 0
none /sys/kernel/debug debroot: Start backing up logs in junior mode
[   19.849420] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   19.865229] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
umount: /etc/mtab: No such file or directory
linuxrc.syno executed successfully.
Post init
[   20.203488] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   20.224694] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1,prjquota,rootprjquota

grep: /tmpRoot/usr/share/init/tty.conf: No such file or directory
addons.sh called with params late
Script for fixing missing HW features dependencies and another functions
'/usr/bin/arpl-reboot.sh' -> '/tmpRoot/usr/bin/arpl-reboot.sh'
'/usr/bin/arc-reboot.sh' -> '/tmpRoot/usr/bin/arc-reboot.sh'
'/usr/bin/grub-editenv' -> '/tmpRoot/usr/bin/grub-editenv'
modprobe: ERROR: could not insert 'acpi_cpufreq': No such device
CPU does NOT support CPU Performance Scaling, disabling
CPU Supports SSE4.2, crc32c-intel should load
CPU Supports AES, aesni-intel should load
MajorVersion:7 MinorVersion:1
Starting eudev daemon - late
copy modules
depmod: WARNING: could not open modules.order at /tmpRoot//lib/modules: No such file or directory
depmod: WARNING: could not open modules.builtin at /tmpRoot//lib/modules: No such file or directory
depmod: WARNING: could not open modules.builtin.modinfo at /tmpRoot//lib/modules: No such file or directory
Copy rules
'/usr/lib/udev/rules.d/50-udev-default.rules' -> '/tmpRoot/usr/lib/udev/rules.d/50-udev-default.rules'
'/usr/lib/udev/rules.d/50-usb-realtek-net.rules' -> '/tmpRoot/usr/lib/udev/rules.d/50-usb-realtek-net.rules'
'/usr/lib/udev/rules.d/50-user-power-save.rules' -> '/tmpRoot/usr/lib/udev/rules.d/50-user-power-save.rules'
'/usr/lib/udev/rules.d/60-block.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-block.rules'
'/usr/lib/udev/rules.d/60-cdrom_id.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-cdrom_id.rules'
'/usr/lib/udev/rules.d/60-drm.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-drm.rules'
'/usr/lib/udev/rules.d/60-evdev.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-evdev.rules'
'/usr/lib/udev/rules.d/60-input-id.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-input-id.rules'
'/usr/lib/udev/rules.d/60-persistent-alsa.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-persistent-alsa.rules'
'/usr/lib/udev/rules.d/60-persistent-input.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-persistent-input.rules'
'/usr/lib/udev/rules.d/60-persistent-v4l.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-persistent-v4l.rules'
'/usr/lib/udev/rules.d/60-sensor.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-sensor.rules'
'/usr/lib/udev/rules.d/60-serial.rules' -> '/tmpRoot/usr/lib/udev/rules.d/60-serial.rules'
'/usr/lib/udev/rules.d/64-btrfs.rules' -> '/tmpRoot/usr/lib/udev/rules.d/64-btrfs.rules'
'/usr/lib/udev/rules.d/70-joystick.rules' -> '/tmpRoot/usr/lib/udev/rules.d/70-joystick.rules'
'/usr/lib/udev/rules.d/70-mouse.rules' -> '/tmpRoot/usr/lib/udev/rules.d/70-mouse.rules'
'/usr/lib/udev/rules.d/70-touchpad.rules' -> '/tmpRoot/usr/lib/udev/rules.d/70-touchpad.rules'
'/usr/lib/udev/rules.d/75-net-description.rules' -> '/tmpRoot/usr/lib/udev/rules.d/75-net-description.rules'
'/usr/lib/udev/rules.d/78-sound-card.rules' -> '/tmpRoot/usr/lib/udev/rules.d/78-sound-card.rules'
'/usr/lib/udev/rules.d/80-drivers.rules' -> '/tmpRoot/usr/lib/udev/rules.d/80-drivers.rules'
'/tmpRoot/lib/systemd/system/multi-user.target.wants/udevrules.service' -> '/lib/systemd/system/udevrules.service'
Adjust disks related configs automatically - late
Adjust maxdisks and internalportcfg automatically
maxdisks=6
internalportcfg=0x3f
usbportcfg=0xf00000
'/etc/extensionPorts' -> '/tmpRoot/etc/extensionPorts'
'/etc/extensionPorts' -> '/tmpRoot/etc.defaults/extensionPorts'
Creating service to exec ethtool
'/usr/sbin/ethtool' -> '/tmpRoot/usr/sbin/ethtool'
Creating service to exec CPU Info
'/usr/sbin/cpuinfo.sh' -> '/tmpRoot/usr/sbin/cpuinfo.sh'
[   22.472790] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[   22.482699] systemd[1]: Detected virtualization kvm.
[   22.484259] systemd[1]: Detected architecture x86-64.

Welcome to Linux!

[   22.495315] systemd[1]: Set hostname to <test-dsm>.
[   23.577898] systemd[1]: Cannot add dependency job for unit syno-qlogic-rdma-modules-load.service, ignoring: Unit syno-qlogic-rdma-modules-load.service is masked.
[   23.581692] systemd[1]: Cannot add dependency job for unit syno-mlnx-rdma-modules-load.service, ignoring: Unit syno-mlnx-rdma-modules-load.service is masked.
[   23.585181] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory.
[   23.588679] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory.
[   23.591831] systemd[1]: Cannot add dependency job for unit SynoLedBrightness.service, ignoring: Unit SynoLedBrightness.service is masked.
[   23.599244] systemd[1]: Cannot add dependency job for unit pkg-synobrm-recovery-restart.service, ignoring: Unit pkg-synobrm-recovery-restart.service failed to load: No such file or directory.
[   23.602956] systemd[1]: Created slice Root Slice.
[   23.603641] systemd[1]: Starting Root Slice.
[  OK  ] Created slice Root Slice.
[  OK  [   23.606775] systemd[1]: Created slice ScsiTarget's slice.
] Created slice [   23.608196] systemd[1]: Starting ScsiTarget's slice.
ScsiTarget's slice.
[  OK  [   23.610388] systemd[1]: Created slice Synology Cache Advisor.
] Created slice Synology Cache A[   23.612434] systemd[1]: Starting Synology Cache Advisor.
dvisor.
[  OK  ] Created slice [   23.613523] systemd[1]: Created slice System Slice.
System Slice.
[   23.614604] systemd[1]: Starting System Slice.
[   23.615415] systemd[1]: Created slice Python2's slice.
[  OK  [   23.616171] systemd[1]: Starting Python2's slice.
] Created slice Python2's slice.
[  OK     23.617228] systemd[1]: Created slice Package Center Slice.
0m] Created slic[   23.618109] systemd[1]: Starting Package Center Slice.
e Package Center Slice.
[   23.619149] systemd[1]: Created slice ActiveInsight's slice.
[  OK  [   23.619893] systemd[1]: Starting ActiveInsight's slice.
] Created slice ActiveInsight's [   23.620866] systemd[1]: Created slice BTRFS Space Reclaim.
slice.
[  [   23.621734] systemd[1]: Starting BTRFS Space Reclaim.
OK  ] Created slice BTRFS Space Reclaim.
[3.622878] systemd[1]: Reached target Swap.
[32m  OK  ] [   23.623669] systemd[1]: Starting Swap.
Reached target Swap.
[  OK[   23.624467] systemd[1]: Listening on Journal Socket.
  ] Listenin[   23.625284] systemd[1]: Starting Journal Socket.
g on Journal Socket.
[   23.630230] systemd[1]: Starting unbind USB device...
         Starting unbind USB device...
[   23.631585] systemd[1]: Starting Load ntb_brd module...
         Starting Load ntb_brd module...
[   23.632807] systemd[1]: Mounting Debug File System...
         Mounting Debug File System...
[   23.633862] systemd[1]: Starting check integrity of rd.gz decompression...
         Starting check integrit[   23.635663] systemd[1]: Starting Load Kernel Modules...
y of rd.gz decompression...
         Startin[   23.637776] systemd[1]: Started Set project quota ID for /var/log.
g Load Kernel Modules...
[   23.652157] systemd[1]: Mounting Temporary Directory...
         Mounting Temporary Dire[   23.653103] systemd[1]: Created slice Shared Folder Sync.
ctory...
[  OK  ] Crea[   23.654294] systemd[1]: Starting Shared Folder Sync.
ted slice Shared Folder Sync.
[  OK  [   23.656047] systemd[1]: Created slice SSDP service.
] Created slice SSDP service.
[   23.657671] systemd[1]: Starting SSDP service.
[   23.658491] systemd[1]: Created slice BTRFS Optimization.
[  OK  [   23.659222] systemd[1]: Starting BTRFS Optimization.
] Created slice BTRFS Optimization.
[   23.660484] systemd[1]: Starting SED Bootup Action...
         Starting SED Bootup Action...
[  [   23.661543] systemd[1]: Created slice SNMP.
OK  ] Create[   23.662336] systemd[1]: Starting SNMP.
d slice SNMP.
[  OK  [   23.663503] systemd[1]: Created slice HybridShare's slice.
] Created slice HybridShare's sl[   23.665878] systemd[1]: Starting HybridShare's slice.
ice.
[  OK  [   23.667146] systemd[1]: Listening on udev Kernel Socket.
] Listening on u[   23.668335] systemd[1]: Starting udev Kernel Socket.
dev Kernel Socket.
[   23.669838] systemd[1]: Starting Set hostname...
[   23.670721] systemd[1]: Created slice User and Session Slice.
[   23.671586] systemd[1]: Starting User and Session Slice.
         Starting Set hostname...
[  OK  ] Created sli[   23.674645] systemd[1]: Reached target Slices.
ce User and Session Slice.
[  OK  ] Reached target Slices.
[   23.678387] systemd[1]: Starting Slices.
[   23.679084] systemd[1]: Created slice SynoFinder's slice.
[  OK  [   23.679824] systemd[1]: Starting SynoFinder's slice.
] Created slice SynoFinder's sli[   23.680759] systemd[1]: Created slice SecureSignIn's slice.
ce.
[  OK  ] Created s[   23.681891] systemd[1]: Starting SecureSignIn's slice.
lice SecureSignIn's slice.
[  OK  [   23.683083] systemd[1]: Listening on udev Control Socket.
] Listening on udev Control Socket.
[   23.684656] systemd[1]: Starting udev Control Socket.
[  OK  [   23.685525] systemd[1]: Created slice system-serial\x2dgetty.slice.
] Created slice [   23.686513] systemd[1]: Starting system-serial\x2dgetty.slice.
system-serial\x2dgetty.slice.
[[   23.687557] systemd[1]: Reached target Timers.
  OK  ][   23.688338] systemd[1]: Starting Timers.
 Reached target Timers.
[ [   23.689083] systemd[1]: Listening on Journal Audit Socket.
 OK  ] Liste[   23.689890] systemd[1]: Starting Journal Audit Socket.
ning on Journal Audit Socket.
[  OK  [   23.691066] systemd[1]: Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
] Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[   23.694714] systemd[1]: Starting system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[  OK  [   23.698177] systemd[1]: Started Machine Check Exception Logging Daemon.
] Started Machin[   23.699345] systemd[1]: Starting Machine Check Exception Logging Daemon...
e Check Exception Logging Daemon.
         Starting Machine Check Exception Logging Daemon...
[   23.701956] systemd[1]: Created slice synobackup daemon slice.
[  OK  [   23.703108] systemd[1]: Starting synobackup daemon slice.
] Created slice synobackup daemon slice.
[  OK  [   23.704650] systemd[1]: Created slice Task Scheduler Group.
] Created slice [   23.705877] systemd[1]: Starting Task Scheduler Group.
Task Scheduler Group.
[   23.707509] systemd[1]: Starting Link coredump path to volume if possible...
         Starting Link coredump path to volume if possible...
[   23.710339] systemd[1]: Starting Disabling fan checking flag ......
[   23.711568] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
         Starting Disabling fan checking flag ......
[  OK  ] Created slice FileStation's slice.
[   23.715631] systemd[1]: Created slice FileStation's slice.
[   23.716396] systemd[1]: Starting FileStation's slice.
[   23.716500] flashcache: flashcache-1.0-2022-09-21-00:34 initialized
[  OK  ] Created slice Performance alarm.
[   23.718893] systemd[1]: Created slice Performance alarm.
[   23.719613] systemd[1]: Starting Performance alarm.
[  OK  ] Created slice SMBService's slice.
[   23.721261] systemd[1]: Created slice SMBService's slice.
[   23.722051] systemd[1]: Starting SMBService's slice.
[   23.723145] systemd[1]: Starting Set time zone information to kernel...
         Starting Set time zone information to kernel...
[  OK  ] Created slice Synology Index slice (WAT).
[   23.726278] systemd[1]: Created slice Synology Index slice (WAT).
[   23.727101] systemd[1]: Starting Synology Index slice (WAT).
[  OK  ] Created slice Synology Flashcache.
[   23.728843] systemd[1]: Created slice Synology Flashcache.
[   23.729592] systemd[1]: Starting Synology Flashcache.
[   23.730659] systemd[1]: Starting Journal Socket (/dev/log).
[  OK  ] Created slice Synology DSM Storage Service.
[   23.732449] systemd[1]: Created slice Synology DSM Storage Service.
[   23.733415] systemd[1]: Starting Synology DSM Storage Service.
[  OK  ] Created slice RAID Resync Process. ...ing Resync, Repair and Reshape..
[   23.735518] systemd[1]: Created slice RAID Resync Process. Including Resync, Repair and Reshape..
[   23.737447] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2022-09-21-00:34-debug initialized
[   23.741235] NET: Registered protocol family 10
[   23.742276] sit: IPv6 over IPv4 tunneling driver
[   23.743959] systemd[1]: Starting RAID Resync Process. Including Resync, Repair and Reshape..
[  OK  ] Created slice OAuthService's slice.
[   23.746182] systemd[1]: Created slice OAuthService's slice.
[   23.746937] systemd[1]: Starting OAuthService's slice.
[  OK  ] Created slice Synology Swap Works.
[   23.748832] systemd[1]: Created slice Synology Swap Works.
[   23.749559] systemd[1]: Starting Synology Swap Works.
[   23.750855] systemd[1]: Starting Synology Task Scheduler Init...
         Starting Synology Task Scheduler Init...
[  OK  ] Created slice Synology DSM internal service.
[   23.754669] systemd[1]: Created slice Synology DSM internal service.
[   23.756300] systemd[1]: Starting Synology DSM internal service.
[  OK  ] Created slice scemd.
[   23.758422] systemd[1]: Created slice scemd.
[   23.758908] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   23.758937] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   23.758966] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   23.761560] systemd[1]: Starting scemd.
[   23.766127] systemd[1]: Starting Set boot sequence config...
         Starting Set boot sequence config...
[  OK  ] Created slice Synology DSM desktop service.
[   23.771445] systemd[1]: Created slice Synology DSM desktop service.
[   23.772328] systemd[1]: Starting Synology DSM desktop service.
[  OK  ] Reached target Paths.
[   23.773898] systemd[1]: Reached target Paths.
[   23.774517] systemd[1]: Starting Paths.
[  OK  ] Mounted Debug File System.
[   23.776461] systemd[1]: Mounted Debug File System.
[  OK  ] Mounted Temporary Directory.
[   23.778215] systemd[1]: Mounted Temporary Directory.
[  OK  ] Started unbind USB device.
[   23.779910] systemd[1]: Started unbind USB device.
[  OK  ] Started Load ntb_brd module.
[   23.781552] systemd[1]: Started Load ntb_brd module.
[  OK  ] Started check integrity of rd.gz decompression.
[   23.783321] systemd[1]: Started check integrity of rd.gz decompression.
[  OK  ] Started SED Bootup Action.
[   23.785213] systemd[1]: Started SED Bootup Action.
[  OK  ] Started Set hostname.
[   23.786760] systemd[1]: Started Set hostname.
[  OK  ] Started Disabling fan checking flag ....
[   23.788389] systemd[1]: Started Disabling fan checking flag ....
[  OK  ] Started Set time zone information to kernel.
[   23.790895] systemd[1]: Started Set time zone information to kernel.
[  OK  ] Listening on Journal Socket (/dev/log).
[   23.792704] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Reached target Sockets.
[   23.794312] systemd[1]: Reached target Sockets.
[   23.794905] systemd[1]: Starting Sockets.
[   23.798128] systemd[1]: Starting Journal Service...
         Starting Journal Servic[   23.799388] systemd[1]: Reached target Local File Systems.
e...
[  OK  ] Reached [   23.800907] systemd[1]: Starting Local File Systems.
target Local File Systems.
[   23.802082] systemd[1]: Starting Set boot sequence config for temporary use...
[   23.802687] e1000e: Intel(R) PRO/1000 Network Driver - 3.8.4-NAPI
[   23.802687] e1000e: Copyright(c) 1999 - 2020 Intel Corporation.
[   23.805789] dca service started, version 1.12.1
[   23.806246] Intel(R) Gigabit Ethernet Linux Driver - version 5.7.2
[   23.806246] Copyright(c) 2007 - 2021 Intel Corporation.
         Starting Set boot sequence config for t[   23.811323] systemd[1]: Starting D-Bus System Message Bus...
emporary use...
         Starting D-Bus System Message Bus...
[   23.812689] systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[   23.814056] systemd[1]: Starting D-Bus Session Message Bus...
         Starting D-Bus Session Message Bus...
[   23.815386] systemd[1]: Starting Mount usb fs...
         Starting Mount usb fs...
[   23.834114] systemd[1]: Started Set boot sequence config for temporary use.
[  OK  ] Started Set boot sequence config for temporary use.
[  OK  ] Started Set boot sequence config.
[   23.841827] systemd[1]: Started Set boot sequence config.
[  OK  [   23.880741] systemd[1]: Started Journal Service.
] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[   23.907889] systemd-journald[5770]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Mount usb fs.
[  OK  ] Started udev Coldplug all Devices.
[   23.954314] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.16.5
[   23.956128] Copyright(c) 1999 - 2022 Intel Corporation.
[   23.964206] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 2.20.12
[   23.965611] i40e: Copyright(c) 2013 - 2022 Intel Corporation.
[   23.971412] tn40xx: Tehuti Network Driver, 0.3.6.14
[   23.972240] tn40xx: Supported phys : MV88X3120 MV88X3310 MV88E2010 QT2025 TLK10232 AQR105 
[   23.999249] qed_init called
[   24.000037] QLogic FastLinQ 4xxxx Core Module qed 8.33.9.0
[   24.001476] creating debugfs root node
[   24.003765] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.33.9.0
[   24.022535] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.36 ($DateTime: 2016/06/16 03:53:41 $)
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Reached target Create SDK locks directory.
         Starting Check Synology user info consistency...
         Starting Check /etc/synoinfo.conf...
         Starting Check Synology group info consistency...
         Starting Synology Database Update...
         Starting synodsmnotify...
[  OK  ] Started Synology[   24.084468] usbcore: registered new interface driver usb-storage
 Task Scheduler Init.
[  OK  ] Started Load Kernel Modules.
         Starting Load Kernel Modules in Kernel Project...
         Starting Load Fan Modules in Kernel Project...
         Starting Insert bnxt module...
         Mounting Configuration File System...
         Starting Apply default and user cus... sysctl.conf kernel variable....
[  OK  ] Started synodsmnotify.
[  OK  ] Mounted Configuration File System.
[  OK  ] Started Synology Database Update.
[  OK  ] Started Apply default and user cust...ed sysctl.conf kernel variable..
         Starting Apply Kernel Variables...
[   24.283290] Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
[  OK  ] Started Apply Kernel Variables.
         Starting Apply kernel variable vm.kswapd_threads...
         Starting Apply kernel variable kernel-shmmni at least 16384...
         Starting Apply kernel variable kernel.sem at least 1024...
         Starting Apply kernel variable vm.min-free-kbytes...
[   24.328676] usbcore: registered new interface driver usblp
[  OK  ] Started Insert bnxt module.
         Starting Adjust NIC sequence...
[  OK  ] Started Apply kernel variable kernel-shmmni at least 16384.
[   24.392264] synobios open /dev/ttyS1 success
[   24.395993] 2023-6-6 19:19:3 UTC
[   24.398135] synobios: load, major number 201
[   24.398141] Brand: Synology
[   24.398145] Model: DS-3622xs+
[   24.398146] set group disks wakeup number to 4, spinup time deno 7
[   24.398153] synobios cpu_arch proc entry initialized
[   24.398154] synobios crypto_hw proc entry initialized
[   24.398156] synobios syno_platform proc entry initialized
[  OK  ] Started Apply kernel variable vm.kswapd_threads.
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started D-Bus Session Message Bus.
[   24.461334] AVX2 version of gcm_enc/dec engaged.
[   24.463304] AES CTR mode by8 optimization enabled
[  OK  ] Started Load Kernel Modules in Kernel Project.
         Starting Software Init Led for support led v2 models...
         Starting DSM Release Rolling Group ID...
[  OK  ] Started Apply kernel variable kernel.sem at least 1024.
[  OK  ] Started Apply kernel variable vm.min-free-kbytes.
[  OK  ] Started DSM Release Rolling Group ID.
[  OK  ] Started Check /etc/synoinfo.conf.
[FAILED] Failed to start Adjust NIC sequence.
See "systemctl status SynoInitEth.service" for details.
[   24.778567] Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
[   24.805639] Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
[  OK  ] Started Link coredump path to volume if possible.
         Starting System Logger Daemon...
[  OK  ] Started Check Synology user info consistency.
[  OK  ] Started Check Synology group info consistency.
[  OK  ] Started Software Init Led for support led v2 models.
[  OK  ] Reached target User and Group Name Lookups.
         Starting move domain or ldap user p...der to domain or ldap folder....
         Starting Prepare notification cache data...
[  OK  ] Reached target Synology local user and group ready.
[  OK  ] Reached target Synology synoscheduler functions.
[   25.403138] Module [adt7475] is removed. 
[  OK  ] Started move domain or ldap user pr...older to domain or ldap folder..
[  OK  ] Started Prepare notification cache data.
[  OK  ] Started System Logger Daemon.
         Starting Synology Log bootup start...
         Starting synodrnode...
[DEPEND] Dependency failed for rebuild local user and group db.
[  OK  ] Reached target Synology root filesystem (rw) ready.
         Starting SAS early initial...
         Starting DSM Installation ID...
         Starting Clean UPS config...
         Starting Synology Default TLS Profile...
         Starting DSM Boot Health Check...
         Starting syno-cgi-keygen.service...
         Starting Load AppArmor profiles...
         Starting Synology check locale...
         Starting Set Eunit Sequence...
[  OK  ] Reached target Network (Pre).
         Starting Synology Network Daemon...
         Starting Set arp ignore...
         Starting Umount initrd...
[  OK  ] Started Clean UPS config.
[  OK  ] Started Synology Log bootup start.
[  OK  ] Started Synology Default TLS Profile.
[  OK  ] Started SAS early initial.
         Starting Synology swap...
[  OK  ] Started Set arp ignore.
[  OK  ] Started DSM Installation ID.
[  OK  ] Started Set Eunit Sequence.
[  OK  ] Started Umount initrd.
[  OK  ] Started Synology check locale.
[   27.165030] zram: Added device: zram0
[   27.167880] zram: Added device: zram1
[   27.406534] md: md1 stopped.
[   27.425205] Module [adt7475] is removed. 
[  OK  ] Started Synology Network Daemon.
         Starting Wait for Synology Network to be Configured...
[   27.529424] md: bind<sdc2>
[   27.550659] md: bind<sdb2>
[   27.552738] md/raid1:md1: active with 2 out of 6 mirrors
[   27.573177] md1: detected capacity change from 0 to 2147418112
[  OK  ] Started Wait for Synology Network to be Configured.
         Starting Synology Network Event Daemon...
[  OK  ] Started synodrnode.
[  OK  ] Started Synology Network Event Daemon.
         Starting rc.network...
[  OK  ] Started syno-cgi-keygen.service.
[   28.216457] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k 
[   28.219785] zram0: detected capacity change from 0 to 1231028224
[   28.223215] Adding 1202172k swap on /dev/zram0.  Priority:1 extents:1 across:1202172k SS
[   28.225627] zram1: detected capacity change from 0 to 1231028224
[   28.229393] Adding 1202172k swap on /dev/zram1.  Priority:1 extents:1 across:1202172k SS
[  OK  ] Started Synology swap.
         Starting udev Kernel Device Manager...
[  OK  ] Started Load AppArmor profiles.
[  OK  ] Started DSM Boot Health Check.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Serial Getty on ttyS0.
         Starting Serial Getty on ttyS0...
[  OK  ] Reached target Login Prompts.
[  OK  ] Started Synology token manager.
         Starting Synology token manager...
[  OK  ] Started Synology task manager.
         Starting Synology task manager...
         Starting bootup upgrade sha package...
[  OK  ] Started bootup upgrade sha package.
[  OK  ] Found device /dev/synoboot2.
[  OK  ] Reached target Synology synoboot2 done.
[  OK  ] Reached target Basic System.
         Starting Log Rotate Daemon...
         Starting Control RC power...
         Starting System Profile Tuning...
         Starting Synology Schedule Daemon...
         Starting Login Service...
         Starting Service for irq balance...
         Starting Synology filesytem check on bootup...
         Starting Arc force WoL on eth0...
         Starting Synology firmware DLMC...
         Starting Samba Environment Setup Unit...
         Starting always preprocess jobs before any package is started...
         Starting Synology log notification service...
         Starting Hibernation debug check...
         Starting Reload udev rules...
         Starting Write back disk latency to DB...
         Starting synoconfd daemon...
         Starting WD idle3 timer...
         Starting synoindex check if there a...ny synoindex-related packages...
[  OK  ] Started Synology log accounting service.
         Starting Synology log accounting service...
         Starting Enable CPU Info...
[  OK  ] Started synobackup daemon.
         Starting synobackup daemon...
[  OK  ] Started Log Rotate Daemon.
[  OK  ] Started Synology filesytem check on bootup.
[  OK  ] Started Arc force WoL on eth0.
[  OK  ] Started Write back disk latency to DB.
[  OK  ] Started WD idle3 timer.
[  OK  ] Started Login Service.
[  OK  ] Started Hibernation debug check.
[  OK  ] Started Reload udev rules.
[  OK  ] Started Synology Schedule Daemon.
[  OK  ] Started synoconfd daemon.
[  OK  ] Started Control RC power.
[  OK  ] Started Service for irq balance.
[  OK  ] Started Synology firmware DLMC.
         Starting Synology space service...
[  OK  ] Stopped Synology Task Scheduler Vmtouch.
[  OK  ] Started Synology Task Scheduler Vmtouch.
         Starting Synology Task Scheduler Vmtouch...
[  OK  ] Started System Profile Tuning.
[FAILED] Failed to start synoindex check if ... any synoindex-related packages.
See "systemctl status synoindex-checkpackage.service" for details.
[DEPEND] Dependency failed for synoindex scand.
[DEPEND] Dependency failed for synoindex plugind.
[DEPEND] Dependency failed for synomkflvd.
[DEPEND] Dependency failed for synoindex mediad.
[DEPEND] Dependency failed for synomkthumbd.
[DEPEND] Dependency failed for synoindexd.
[DEPEND] Dependency failed for synoindex workerd.
[DEPEND] Dependency failed for synoindex notifyd.
[  OK  ] Started always preprocess jobs before any package is started.
[  OK  ] Reached target Hook on root ready.
         Starting Python2's service unit...
         Starting SecureSignIn's service unit...
         Starting ActiveInsight's service unit...
         Starting SMBService's service unit...
[   29.469548] Module [adt7475] is removed. 
[  OK  ] Started Samba Environment Setup Unit.
[  OK  ] Started Synology log notification service.
[  OK  ] Stopped eth0 DHCP Client.
         Starting DHCP client init...
[  OK  ] Created slice system-dhclient.slice.
[  OK  ] Stopped eth0-info DHCP Client v6.
[  OK  ] Stopped eth0-client DHCP Client v6.
[  OK  ] Stopped eth0-pd DHCP Client v6.
[  OK  ] Started DHCP client init.
         Starting eth0 DHCP Client...
[  OK  ] Started eth0 DHCP Client.
[  OK  ] Started Enable CPU Info.
[  OK  ] Started rc.network.
         Starting Check if network is ready...
         Starting PPPoE...
         Starting Set Multiple Geteway...
[  OK  ] Started PPPoE.
[  OK  ] Started Python2's service unit.
[  OK  ] Started Set Multiple Geteway.
[  OK  ] Reached target Network.
         Starting Synology SCGI SocketIO...
         Starting Network Time Service...
         Starting Out of Band Management Status Check...
         Starting Redis data structure server for webapi...
         Starting findhost daemon...
[FAILED] Failed to start Out of Band Management Status Check.
See "systemctl status syno-oob-check-status.service" for details.
[  OK  ] Started Load Fan Modules in Kernel Project.
[  OK  ] Started findhost daemon.
[  OK  ] Started Redis data structure server for webapi.
[  OK  ] Started Synology SCGI.
         Starting Synology SCGI...
[  OK  ] Started Network Time Service.
         Stopping Synology Task Scheduler Vmtouch...
[  OK  ] Stopped Synology Task Scheduler Vmtouch.
[  OK  ] Started Synology Task Scheduler Vmtouch.
         Starting Synology Task Scheduler Vmtouch...
[  OK  ] Started SMBService's service unit.
[  OK  ] Started Check if network is ready.
[  OK  ] Reached target Network is Online.
         Starting Avahi daemon...
         Starting VPN Client...
         Starting Entry for WS-Transfer and WS-Discovery Server...
         Starting register ds region by ip...
         Starting broadcast synorelayd boot state...
         Starting NetBIOS name server...
[  OK  ] Started Entry for WS-Transfer and WS-Discovery Server.
[  OK  ] Started VPN Client.
[  OK  ] Started SecureSignIn's service unit.
[  OK  ] Started Avahi daemon.
[  OK  ] Created slice system-dhclient6.slice.
         Starting eth0-info DHCP Client v6...
[  OK  ] Started ActiveInsight's service unit.
[  OK  ] Started eth0-info DHCP Client v6.
         Stopping Synology Task Scheduler Vmtouch...
[  OK  ] Stopped Synology Task Scheduler Vmtouch.
[  OK  ] Started Synology Task Scheduler Vmtouch.
         Starting Synology Task Scheduler Vmtouch...
[  OK  ] Started broadcast synorelayd boot state.
[   32.507806] md: md2 stopped.
[   32.648723] md: bind<sdc5>
[   32.649721] md: bind<sdb5>
[   32.664367] md/raid1:md2: active with 2 out of 2 mirrors
[   32.685471] md2: detected capacity change from 0 to 989220438016
[  OK  ] Started NetBIOS name server.
[  OK  ] Started WS-Discovery Server.
         Starting WS-Discovery Server...
[  OK  ] Started register ds region by ip.
[   34.014076] flashcache_syno: /dev/vg1/volume_1 exclude check success

test-dsm login: [   34.746016] raid6: sse2x1   gen()  7957 MB/s
[   34.764016] raid6: sse2x1   xor()  5626 MB/s
[   34.782010] raid6: sse2x2   gen() 10515 MB/s
[   34.799008] raid6: sse2x2   xor()  9375 MB/s
[   34.816007] raid6: sse2x4   gen() 20121 MB/s
[   34.833008] raid6: sse2x4   xor() 12257 MB/s
[   34.850007] raid6: avx2x1   gen() 28417 MB/s
[   34.867006] raid6: avx2x1   xor() 19703 MB/s
[   34.884007] raid6: avx2x2   gen() 34859 MB/s
[   34.901008] raid6: avx2x2   xor() 21648 MB/s
[   34.918007] raid6: avx2x4   gen() 39234 MB/s
[   34.935008] raid6: avx2x4   xor() 23027 MB/s
[   34.936144] raid6: using algorithm avx2x4 gen() 39234 MB/s
[   34.937977] raid6: .... xor() 23027 MB/s, rmw enabled
[   34.939560] raid6: using avx2x2 recovery algorithm
[   34.940856] xor: automatically using best checksumming function:
[   34.951007]    avx       : 27592.000 MB/sec
[   34.999354] Btrfs loaded, crc32c=crc32c-intel
[   35.019597] BTRFS: device label 2023.06.04-20:58:15 v42962 devid 1 transid 389 /dev/mapper/cachedev_0
[   35.022501] BTRFS info (device dm-2): enabling auto syno reclaim space
[   35.023545] BTRFS info (device dm-2): use ssd allocation scheme
[   35.024488] BTRFS info (device dm-2): using free space tree
[   35.025564] BTRFS info (device dm-2): using free block group cache tree
[   35.026727] BTRFS info (device dm-2): has skinny extents
[   35.061370] BTRFS info (device dm-2): BTRFS: root of syno feature tree is null
[   37.429158] Synotify use 16384 event queue size
[   37.430537] Synotify use 16384 event queue size
[   38.006172] ata2.00: configured for UDMA/100
[   38.007676] ata2: EH complete
[   38.112554] ata3.00: configured for UDMA/100
[   38.113151] ata3: EH complete
[   38.717176] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use)
[   39.155305] ext2: synoboot2 mounted, process=synopkicompatsy
[   39.156966] EXT2-fs (synoboot2): warning: mounting unchecked fs, running e2fsck is recommended
[   39.159973] synoboot2 unmounted, process=synopkicompatsy
[   39.537033] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[   40.161547] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(aef635d71330).
[   40.168871] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
[   40.190914] iSCSI:target_core_device.c:613:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[   40.192549] iSCSI:target_core_configfs.c:5777:target_init_dbroot db_root: cannot open: /etc/target
[   40.193826] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[   40.216696] iSCSI:target_core_file.c:152:fd_attach_hba RODSP plugin for fileio is enabled.
[   40.217915] iSCSI:target_core_file.c:159:fd_attach_hba ODX Token Manager is enabled.
[   40.220582] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
[   40.221831] iSCSI:target_core_ep.c:795:ep_attach_hba RODSP plugin for epio is enabled.
[   40.222877] iSCSI:target_core_ep.c:802:ep_attach_hba ODX Token Manager is enabled.
[   40.291881] workqueue: max_active 1024 requested for vhost_scsi is out of range, clamping between 1 and 512
[   40.480517] iSCSI:qla_dbg.c:2605:ql_log qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k.
[   40.505221] [12829]: ocs_fc_lio: ocs_scsi_ini_driver_init:1104::disabling the app heartbeat timeout detection
[   40.506559] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1225::ocs_fc_lio: driver version 12.2.385.0
[   40.507888] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1227::  Module parameters:
[   40.508983] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1228::  Initiator = 0
[   40.509936] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1229::  Target = 1
[   40.510914] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1230::  ctrlmask = 0x000a
[   40.511958] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1231::  loglevel = 5
[   40.512898] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1232::  logmask = 0x0000
[   40.513922] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1233::  ramlog_size = 1048576
[   40.514954] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1234::  rq_threads = 0
[   40.515950] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1235::  wwn_bump = 0
[   40.516890] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1236::  topology = 0
[   40.517833] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1237::  speed = 0
[   40.518746] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1238::  holdoff_link_online = 2
[   40.519838] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1239::  enable_hlm = 0
[   40.520798] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1240::  hlm_group_size = 8
[   40.521830] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1241::  max_remote_nodes = 2048
[   40.522927] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1242::  ethernet_license = 0
[   40.524030] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1243::  num_scsi_ios = 8192
[   40.525196] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1244::  dif_separate = 0
[   40.526319] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1245::  tow_feature = 0
[   40.527324] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1246::  tow_io_size = 65536
[   40.528442] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1247::  tow_xri_cnt = 512
[   40.529527] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1248::  queue_topology = eq cq rq cq mq $nulp($nwq(cq wq:ulp=$rpt1)) cq wq:len=256:class=1
[   40.531358] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1249::  rq_selection_policy = 0
[   40.532480] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1250::  rr_quanta = 1
[   40.533498] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1251::  filter_ref = 0,0,0,0
[   40.534587] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1252::  cq_process_limit = 64
[   40.535691] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1253::  explicit_buffer_list = 0
[   40.536787] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1254::  external_loopback = 0
[   40.537891] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1255::  target_io_timer = 0
[   40.538931] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1256::  target_wqe_timer = 30
[   40.540070] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1257::  ddump_saved_size = 0
[   40.541143] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1258::  hal_war_version = (null)
[   40.542292] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1259::  hw_cmpl_context = 1
[   40.543458] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1260::  watchdog_timeout = 0
[   40.544575] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1261::  heartbeat_cpu_mask = 0x0
[   40.545779] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1262::  sliport_healthcheck = 0
[   40.546982] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1263::  disable_fec = 0
[   40.548053] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1264::  enable_dpp = 1
[   40.549065] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1265::  sliport_pause_errors = disabled
[   40.550259] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1266::  enable_bbcr = 1
[   40.551281] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1267::  fw_dump_type = 1
[   40.552392] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1268::  enable_auto_recovery = 0
[   40.553575] [12829]: ocs_fc_lio: ocs_driver_print_module_params:1269::  cfg_suppress_rsp = 1
[   40.554971] [12830]: ocs_fc_lio: ocs_thread_thunk:1046::ocs_proxy running
[   41.449878] 8021q: 802.1Q VLAN Support v1.8
[   41.450503] 8021q: adding VLAN 0 to HW filter on device eth0
[   43.844906] fuse init (API version 7.23)
andreheuer commented 1 year ago

The daemon was not installed / loaded as I have seen now. I will check for the installed modules.

AuxXxilium commented 1 year ago

we have a problem. eudev is loading twice.

AuxXxilium commented 1 year ago

the daemon is in acpi addon included. so you have removed it. it will be added by default

please wait for 23.6.23b and try a clean build

andreheuer commented 1 year ago

I have installed the new version and made a clean DSM installation. Unfortunately, still not working :-(

Please find the current log below. If you need further information / setup etc., please let me now.

Loading kernel...
Loading initramfs...
Booting...

Please press Enter to activate this console. [    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.180+ (root@build6) (gcc version 8.5.0 (GCC) ) #42962 SMP Sat Apr 8 00:14:23 CST 2023
[    0.000000] Command line: withefi synoboot_satadom=1 dom_szmax=1034 console=ttyS0,115200n8 earlyprintk earlycon=uart8250,io,0x3f8,115200n8 root=/dev/md0 loglevel=15 log_buf_len=32M syno_hw_version=DS3622xs+ netif_num=1 pid=0x0000 mac1=001132FA6CD4 sn=2150SQRW1ZAHH vid=0x0000 elevator=elevator HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 SataPortMap=3
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  960, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000400-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000000805fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000806000-0x0000000000807fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000808000-0x000000000080ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000810000-0x00000000008fffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000900000-0x00000000bec7dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bec7e000-0x00000000bed7ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bed80000-0x00000000bf6ebfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf6ec000-0x00000000bf96bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf96c000-0x00000000bf97dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf97e000-0x00000000bf9fdfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf9fe000-0x00000000bfeebfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfeec000-0x00000000bff6ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bff70000-0x00000000bfffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] earlycon: Early serial console at I/O port 0x3f8 (options '115200n8')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x00102000-0x0010202f] usable ==> usable
[    0.000000] e820: update [mem 0x00100000-0x0010006f] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000400-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000000010006f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000100070-0x0000000000101fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000102000-0x000000000010202f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000102030-0x0000000000805fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000806000-0x0000000000807fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000000808000-0x000000000080ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000810000-0x00000000008fffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000000900000-0x00000000bec7dfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bec7e000-0x00000000bed7ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bed80000-0x00000000bf6ebfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bf6ec000-0x00000000bf96bfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bf96c000-0x00000000bf97dfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000bf97e000-0x00000000bf9fdfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000bf9fe000-0x00000000bfeebfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bfeec000-0x00000000bff6ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bff70000-0x00000000bfffffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] efi: EFI v2.70 by EFI Development Kit II / OVMF
[    0.000000] efi:  SMBIOS=0xbf720000  ACPI=0xbf97d000  ACPI 2.0=0xbf97d014 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 3.20230228-2 04/04/2023
[    0.000000] Kernel/User page tables isolation: disabled
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 7000000000 mask 7000000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xbfeec max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 28672
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x13cd55000, 0x13cd55fff] PGTABLE
[    0.000000] BRK [0x13cd56000, 0x13cd56fff] PGTABLE
[    0.000000] BRK [0x13cd57000, 0x13cd57fff] PGTABLE
[    0.000000] BRK [0x13cd58000, 0x13cd58fff] PGTABLE
[    0.000000] BRK [0x13cd59000, 0x13cd59fff] PGTABLE
[    0.000000] BRK [0x13cd5a000, 0x13cd5afff] PGTABLE
[    0.000000] log_buf_len: 33554432 bytes
[    0.000000] early log buf free: 1041884(99%)
[    0.000000] RAMDISK: [mem 0x138457000-0x13c1fffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000BF97D014 000024 (v02 BOCHS )
[    0.000000] ACPI: XSDT 0x00000000BF97C0E8 000054 (v01 BOCHS  BXPC     00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000BF977000 000074 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000BF978000 003D26 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000BF9DB000 000040
[    0.000000] ACPI: APIC 0x00000000BF976000 000080 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: SSDT 0x00000000BF975000 0000CA (v01 BOCHS  VMGENID  00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000BF974000 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: WAET 0x00000000BF973000 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: BGRT 0x00000000BF972000 000038 (v01 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000000805fff]
[    0.000000]   node   0: [mem 0x0000000000808000-0x000000000080ffff]
[    0.000000]   node   0: [mem 0x0000000000900000-0x00000000bec7dfff]
[    0.000000]   node   0: [mem 0x00000000bed80000-0x00000000bf6ebfff]
[    0.000000]   node   0: [mem 0x00000000bf9fe000-0x00000000bfeebfff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1046917
[    0.000000]   DMA zone: 59 pages used for memmap
[    0.000000]   DMA zone: 26 pages reserved
[    0.000000]   DMA zone: 3757 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12204 pages used for memmap
[    0.000000]   DMA32 zone: 781016 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x00100000-0x00100fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00102000-0x00102fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00806000-0x00807fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00810000-0x008fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbec7e000-0xbed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf6ec000-0xbf96bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf96c000-0xbf97dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf97e000-0xbf9fdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfeec000-0xbff6ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff70000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfeffbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xfeffbfff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88013dc00000 s95192 r8192 d31784 u1048576
[    0.000000] pcpu-alloc: s95192 r8192 d31784 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030532
[    0.000000] Kernel command line: withefi synoboot_satadom=1 dom_szmax=1034 console=ttyS0,115200n8 earlyprintk earlycon=uart8250,io,0x3f8,115200n8 root=/dev/md0 loglevel=15 log_buf_len=32M syno_hw_version=DS3622xs+ netif_num=1 pid=0x0000 mac1=001132FA6CD4 sn=2150SQRW1ZAHH vid=0x0000 elevator=elevator HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 SataPortMap=3
[    0.000000] Synology boot device SATADOM: 1
[    0.000000] Synology Hardware Version: DS3622xs+
[    0.000000] Internal netif num: 1
[    0.000000] Mac1: 001132FA6CD4
[    0.000000] Serial Number: 2150SQRW1ZAHH
[    0.000000] Disk Index Map: 00
[    0.000000] SYNO GPIO HDD detect pin: 0
[    0.000000] Vender format version: 2
[    0.000000] Power on seq num: 0
[    0.000000] Sata Port Map: 3
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 3941536K/4187668K available (5549K kernel code, 880K rwdata, 1780K rodata, 924K init, 1568K bss, 246132K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:4352 nr_irqs:440 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] bootconsole [uart0] disabled
[    0.000000] bootconsole [uart0] disabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3311.882 MHz processor
[    0.002004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6623.76 BogoMIPS (lpj=3311882)
[    0.004006] pid_max: default: 32768 minimum: 301
[    0.004773] ACPI: Core revision 20150930
[    0.007600] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.008130] Security Framework initialized
[    0.009011] AppArmor: AppArmor initialized
[    0.010006] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.011003] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.012236] Initializing cgroup subsys io
[    0.013005] Initializing cgroup subsys memory
[    0.014007] Initializing cgroup subsys devices
[    0.014733] Initializing cgroup subsys freezer
[    0.015038] CPU: Physical Processor ID: 0
[    0.016002] CPU: Processor Core ID: 0
[    0.028852] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.029002] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.030007] Speculative Store Bypass: Vulnerable
[    0.033557] Freeing SMP alternatives memory: 24K
[    0.034287] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.036777] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.046798] TSC deadline timer enabled
[    0.047000] smpboot: CPU0: Intel(R) Xeon(R) E-2124 CPU @ 3.30GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[    0.047240] Performance Events: generic architected perfmon, full-width counters, Intel PMU driver.
[    0.048249] ... version:                2
[    0.048769] ... bit width:              48
[    0.049002] ... generic registers:      8
[    0.049532] ... value mask:             0000ffffffffffff
[    0.050002] ... max period:             00007fffffffffff
[    0.050696] ... fixed-purpose events:   3
[    0.051002] ... event mask:             00000007000000ff
[    0.051982] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.053077] x86: Booting SMP configuration:
[    0.053671] .... node  #0, CPUs:      #1
[    0.067023] x86: Booted up 1 node, 2 CPUs
[    0.067591] smpboot: Total of 2 processors activated (13247.52 BogoMIPS)
[    0.068370] devtmpfs: initialized
[    0.069086] PM: Registering ACPI NVS region [mem 0x00806000-0x00807fff] (8192 bytes)
[    0.070004] PM: Registering ACPI NVS region [mem 0x00810000-0x008fffff] (983040 bytes)
[    0.070010] PM: Registering ACPI NVS region [mem 0xbf97e000-0xbf9fdfff] (524288 bytes)
[    0.071000] PM: Registering ACPI NVS region [mem 0xbff70000-0xbfffffff] (589824 bytes)
[    0.072009] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.072009] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.073267] NET: Registered protocol family 16
[    0.077013] cpuidle: using governor ladder
[    0.083007] cpuidle: using governor menu
[    0.084095] ACPI: bus type PCI registered
[    0.085032] PCI: Using configuration type 1 for base access
[    0.090219] ACPI: Added _OSI(Module Device)
[    0.091013] ACPI: Added _OSI(Processor Device)
[    0.091559] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.092002] ACPI: Added _OSI(Processor Aggregator Device)
[    0.094085] ACPI: Interpreter enabled
[    0.094551] ACPI: (supports S0 S4 S5)
[    0.095002] ACPI: Using IOAPIC for interrupt routing
[    0.095625] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.100901] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.101008] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.102016] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.103013] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.104089] PCI host bridge to bus 0000:00
[    0.104795] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.105010] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.105959] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.106003] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.106925] pci_bus 0000:00: root bus resource [mem 0x7000000000-0x707fffffff window]
[    0.107003] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.107854] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.108459] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.109656] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.112265] pci 0000:00:01.1: reg 0x20: [io  0x10e0-0x10ef]
[    0.114039] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.115008] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.116008] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.117008] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.118109] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
[    0.121695] pci 0000:00:01.2: reg 0x20: [io  0x1080-0x109f]
[    0.123086] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.124505] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[    0.125016] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[    0.126326] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.128774] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff pref]
[    0.130035] pci 0000:00:02.0: reg 0x18: [mem 0xc1643000-0xc1643fff]
[    0.133403] pci 0000:00:02.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.134367] pci 0000:00:03.0: [1af4:1002] type 00 class 0x00ff00
[    0.135820] pci 0000:00:03.0: reg 0x10: [io  0x1000-0x103f]
[    0.138924] pci 0000:00:03.0: reg 0x20: [mem 0x7030000000-0x7030003fff 64bit pref]
[    0.139833] pci 0000:00:05.0: [1b36:0001] type 01 class 0x060400
[    0.140623] pci 0000:00:05.0: reg 0x10: [mem 0x703000e000-0x703000e0ff 64bit]
[    0.141834] pci 0000:00:07.0: [8086:2922] type 00 class 0x010601
[    0.144663] pci 0000:00:07.0: reg 0x20: [io  0x10a0-0x10bf]
[    0.146242] pci 0000:00:07.0: reg 0x24: [mem 0xc1642000-0xc1642fff]
[    0.147820] pci 0000:00:08.0: [1af4:1003] type 00 class 0x078000
[    0.148773] pci 0000:00:08.0: reg 0x10: [io  0x1040-0x107f]
[    0.149621] pci 0000:00:08.0: reg 0x14: [mem 0xc1641000-0xc1641fff]
[    0.151647] pci 0000:00:08.0: reg 0x20: [mem 0x7030004000-0x7030007fff 64bit pref]
[    0.153184] pci 0000:00:12.0: [1af4:1000] type 00 class 0x020000
[    0.155003] pci 0000:00:12.0: reg 0x10: [io  0x10c0-0x10df]
[    0.157004] pci 0000:00:12.0: reg 0x14: [mem 0xc1640000-0xc1640fff]
[    0.159633] pci 0000:00:12.0: reg 0x20: [mem 0x7030008000-0x703000bfff 64bit pref]
[    0.160584] pci 0000:00:12.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
[    0.161513] pci 0000:00:1e.0: [1b36:0001] type 01 class 0x060400
[    0.162620] pci 0000:00:1e.0: reg 0x10: [mem 0x703000d000-0x703000d0ff 64bit]
[    0.163775] pci 0000:00:1f.0: [1b36:0001] type 01 class 0x060400
[    0.165347] pci 0000:00:1f.0: reg 0x10: [mem 0x703000c000-0x703000c0ff 64bit]
[    0.167214] pci 0000:00:05.0: PCI bridge to [bus 01]
[    0.167892] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.168016] pci 0000:00:05.0:   bridge window [mem 0xc1400000-0xc15fffff]
[    0.168888] pci 0000:00:05.0:   bridge window [mem 0x7000000000-0x700fffffff 64bit pref]
[    0.169591] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.170017] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.170788] pci 0000:00:1e.0:   bridge window [mem 0xc1200000-0xc13fffff]
[    0.171028] pci 0000:00:1e.0:   bridge window [mem 0x7010000000-0x701fffffff 64bit pref]
[    0.172811] pci 0000:00:1f.0: PCI bridge to [bus 03]
[    0.173017] pci 0000:00:1f.0:   bridge window [io  0xc000-0xcfff]
[    0.173789] pci 0000:00:1f.0:   bridge window [mem 0xc1000000-0xc11fffff]
[    0.174029] pci 0000:00:1f.0:   bridge window [mem 0x7020000000-0x702fffffff 64bit pref]
[    0.175910] pci_bus 0000:00: on NUMA node 0
[    0.176244] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0, disabled.
[    0.177263] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.178088] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *10 11)
[    0.178937] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.179260] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.180205] ACPI: Enabled 3 GPEs in block 00 to 0F
[    0.181162] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.181756] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.182022] vgaarb: loaded
[    0.182378] vgaarb: bridge control possible 0000:00:02.0
[    0.183104] SCSI subsystem initialized
[    0.183636] libata version 3.00 loaded.
[    0.184033] pps_core: LinuxPPS API ver. 1 registered
[    0.184755] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.185019] PTP clock support registered
[    0.185566] EDAC MC: Ver: 3.0.0
[    0.186271] EFI Variables Facility v0.08 2004-May-17
[    0.187581] pstore: Registered efi as persistent store backend
[    0.188013] PCI: Using ACPI for IRQ routing
[    0.188548] PCI: pci_cache_line_size set to 64 bytes
[    0.189190] e820: reserve RAM buffer [mem 0x00102000-0x001fffff]
[    0.189947] e820: reserve RAM buffer [mem 0x00806000-0x008fffff]
[    0.190002] e820: reserve RAM buffer [mem 0x00810000-0x008fffff]
[    0.190764] e820: reserve RAM buffer [mem 0xbec7e000-0xbfffffff]
[    0.191002] e820: reserve RAM buffer [mem 0xbf6ec000-0xbfffffff]
[    0.191761] e820: reserve RAM buffer [mem 0xbfeec000-0xbfffffff]
[    0.192281] clocksource: Switched to clocksource hpet
[    0.197498] AppArmor: AppArmor Filesystem Enabled
[    0.198184] pnp: PnP ACPI init
[    0.198680] pnp 00:00: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.199606] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.200526] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.201465] pnp 00:03: [dma 2]
[    0.201874] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.203131] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.204515] pnp: PnP ACPI: found 5 devices
[    0.210652] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.211834] pci 0000:00:02.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.213119] pci 0000:00:12.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
[    0.215358] pci 0000:00:12.0: BAR 6: assigned [mem 0xc1600000-0xc163ffff pref]
[    0.216341] pci 0000:00:02.0: BAR 6: assigned [mem 0xc1650000-0xc165ffff pref]
[    0.217294] pci 0000:00:05.0: PCI bridge to [bus 01]
[    0.217932] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.219129] pci 0000:00:05.0:   bridge window [mem 0xc1400000-0xc15fffff]
[    0.220254] pci 0000:00:05.0:   bridge window [mem 0x7000000000-0x700fffffff 64bit pref]
[    0.221763] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.222445] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.223597] pci 0000:00:1e.0:   bridge window [mem 0xc1200000-0xc13fffff]
[    0.225197] pci 0000:00:1e.0:   bridge window [mem 0x7010000000-0x701fffffff 64bit pref]
[    0.226777] pci 0000:00:1f.0: PCI bridge to [bus 03]
[    0.227489] pci 0000:00:1f.0:   bridge window [io  0xc000-0xcfff]
[    0.228660] pci 0000:00:1f.0:   bridge window [mem 0xc1000000-0xc11fffff]
[    0.229942] pci 0000:00:1f.0:   bridge window [mem 0x7020000000-0x702fffffff 64bit pref]
[    0.231560] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.232374] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.233196] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.234088] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.235355] pci_bus 0000:00: resource 8 [mem 0x7000000000-0x707fffffff window]
[    0.236292] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.236993] pci_bus 0000:01: resource 1 [mem 0xc1400000-0xc15fffff]
[    0.237826] pci_bus 0000:01: resource 2 [mem 0x7000000000-0x700fffffff 64bit pref]
[    0.238807] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.239541] pci_bus 0000:02: resource 1 [mem 0xc1200000-0xc13fffff]
[    0.240361] pci_bus 0000:02: resource 2 [mem 0x7010000000-0x701fffffff 64bit pref]
[    0.241344] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.242072] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc11fffff]
[    0.242851] pci_bus 0000:03: resource 2 [mem 0x7020000000-0x702fffffff 64bit pref]
[    0.243861] NET: Registered protocol family 2
[    0.244686] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.245706] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.246834] TCP: Hash tables configured (established 32768 bind 32768)
[    0.247704] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.248515] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.249430] NET: Registered protocol family 1
[    0.249996] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.250830] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.267859] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.284723] pci 0000:00:02.0: Video device with shadowed ROM
[    0.285589] PCI: CLS 0 bytes, default 64
[    1.212858] Trying to unpack rootfs image as initramfs...
[    1.236249] Freeing initrd memory: 63140K
[    1.238431] redpill: loading out-of-tree module taints kernel.
[    1.239433] redpill: module verification failed: signature and/or required key missing - tainting kernel
[    1.255231] PCI host bridge to bus 0001:09
[    1.255856] pci_bus 0001:09: root bus resource [io  0x0000-0xffff]
[    1.256724] pci_bus 0001:09: root bus resource [mem 0x00000000-0x7fffffffff]
[    1.257724] pci_bus 0001:09: root bus resource [bus 00-ff]
[    1.258485] pci 0001:09:00.0: [1b4b:9235] type 00 class 0x010601
[    1.259318] pci 0001:09:00.0: Can't map mv9235 registers
[    1.260097] PCI host bridge to bus 0001:0c
[    1.260622] pci_bus 0001:0c: root bus resource [io  0x0000-0xffff]
[    1.261444] pci_bus 0001:0c: root bus resource [mem 0x00000000-0x7fffffffff]
[    1.262362] pci_bus 0001:0c: busn_res: can not insert [bus 0c-ff] under domain [bus 00-ff] (conflicts with (null) [bus 09-ff])
[    1.264063] pci_bus 0001:0c: root bus resource [bus 00-ff]
[    1.264748] pci 0001:0c:00.0: [1b4b:9235] type 00 class 0x010601
[    1.265567] pci 0001:0c:00.0: Can't map mv9235 registers
[    1.276390] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.277345] software IO TLB: mapped [mem 0xb9f37000-0xbdf37000] (64MB)
[    1.278603] audit: initializing netlink subsys (disabled)
[    1.279388] audit: type=2000 audit(1686084190.279:1): initialized
[    1.280284] Initialise system trusted keyring
[    1.298844] VFS: Disk quotas dquot_6.6.0
[    1.299560] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.467214] Key type asymmetric registered
[    1.468725] Asymmetric key parser 'x509' registered
[    1.470478] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.473108] io scheduler noop registered
[    1.474437] io scheduler deadline registered
[    1.475961] io scheduler cfq registered (default)
[    1.658549] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.684571] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.077899] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.083520] brd: module loaded
[    2.084069] Loading iSCSI transport class v2.0-870.
[    2.086431] rdac: device handler registered
[    2.122316] i2c /dev entries driver
[    2.122844] ahci 0000:00:07.0: version 3.0
[    2.140174] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[    2.141473] ahci 0000:00:07.0: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    2.143037] ahci 0000:00:07.0: flags: 64bit ncq only 
[    2.195345] scsi host0: ahci
[    2.196808] scsi host1: ahci
[    2.199265] scsi host2: ahci
[    2.199845] ata1: SATA max UDMA/133 abar m4096@0xc1642000 port 0xc1642100 irq 24
[    2.201216] ata2: SATA max UDMA/133 abar m4096@0xc1642000 port 0xc1642180 irq 24
[    2.202262] ata3: SATA max UDMA/133 abar m4096@0xc1642000 port 0xc1642200 irq 24
[    2.203320] ahci: probe of 0001:09:00.0 failed with error -22
[    2.204182] ahci: probe of 0001:0c:00.0 failed with error -22
[    2.205128] rtc_cmos 00:04: RTC can wake from S4
[    2.205951] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.206928] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    2.208077] md: raid1 personality registered for level 1
[    2.209219] NET: Registered protocol family 17
[    2.209803] Key type dns_resolver registered
[    2.212217] mce: Using 10 MCE banks
[    2.212804] registered taskstats version 1
[    2.213571] Loading compiled-in untrusted X.509 certificates
[    2.214438] Loading compiled-in X.509 certificates
[    2.215300] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[    2.224952] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[    2.226418] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[    2.228047] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[    2.229409] page_owner is disabled
[    2.229898] AppArmor: AppArmor sha1 policy hashing enabled
[    2.257697] rtc_cmos 00:04: setting system clock to 2023-06-06 20:43:12 UTC (1686084192)
[    2.280178] tsc: Refined TSC clocksource calibration: 3311.977 MHz
[    2.281031] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fbd7e467c1, max_idle_ns: 440795237359 ns
[    2.511553] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.516653] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.520636] ata2.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[    2.527527] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.533414] ata2.00: SN:QM00007
[    2.535508] ata2.00: applying bridge limits
[    2.538436] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[    2.541447] ata1.00: 2097152 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.541871] hrtimer: interrupt took 5433060 ns
[    2.546746] ata1.00: SN:QM00005
[    2.548396] ata1.00: applying bridge limits
[    2.551319] ata2.00: configured for UDMA/100
[    2.554244] ata1.00: configured for UDMA/100
[    2.556937] ata1.00: Find SSD disks. [QEMU HARDDISK]
[    2.558491] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.560680] ata3.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[    2.560684] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.560685] ata3.00: SN:QM00009
[    2.560690] ata3.00: applying bridge limits
[    2.568540] ata3.00: configured for UDMA/100
[    2.580668] scsi 0:0:0:0: Direct-Access     QEMU     HARDDISK                 2.5+ PQ: 0 ANSI: 5
[    2.587325] sd 0:0:0:0: [synoboot] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[    2.587427] ata2.00: Find SSD disks. [QEMU HARDDISK]
[    2.595251] sd 0:0:0:0: [synoboot] Write Protect is off
[    2.597994] sd 0:0:0:0: [synoboot] Mode Sense: 00 3a 00 00
[    2.601760] scsi 1:0:0:0: Direct-Access     QEMU     HARDDISK                 2.5+ PQ: 0 ANSI: 5
[    2.610194] sd 0:0:0:0: [synoboot] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.628367]  synoboot: synoboot1 synoboot2 synoboot3
[    2.661797] sd 0:0:0:0: [synoboot] Attached SCSI disk
[    2.686232] ata3.00: Find SSD disks. [QEMU HARDDISK]
[    2.686272] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.688256] sd 1:0:0:0: [sdb] Write Protect is off
[    2.688260] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.688372] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.700612]  sdb: sdb1 sdb2 sdb3 < sdb5 >
[    2.703297] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.720331] scsi 2:0:0:0: Direct-Access     QEMU     HARDDISK                 2.5+ PQ: 0 ANSI: 5
[    2.726220] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.728185] sd 2:0:0:0: [sdc] Write Protect is off
[    2.728965] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.729817] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.733091]  sdc: sdc1 sdc2 sdc3 < sdc5 >
[    2.734210] sd 2:0:0:0: [sdc] Attached SCSI disk
[    2.736174] Freeing unused kernel memory: 924K
[    2.736808] Write protecting the kernel read-only data: 8192k
[    2.738241] Freeing unused kernel memory: 584K
[    2.739306] Freeing unused kernel memory: 268K
START /linuxrc.syno
START /linuxrc.syno.impl
[    2.891085] random: nonblocking pool is initialized
addons.sh called with params early
Insert Marvell 1475 SATA controller driver
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading mod[    2.945343] ACPI: bus type USB registered
u[    2.946243] usbcore: registered new interface driver usbfs
[    2.947261] usbcore: registered new interface driver hub
[    2.948465] usbcore: registered new interface driver ethub
l[    2.949856] usbcore: registered new device driver usb
e usbcore ... [  OK  ]
:: Loading module ehci-hcd[    2.965491] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ... [  OK  ]
:: Load[    2.969508] ehci-pci: EHCI PCI platform driver
ing module ehci-pci ... [  OK  ]
:: Loading[    2.974420] uhci_hcd: USB Universal Host Controller Interface driver
 module uhci-hcd[    2.992130] uhci_hcd 0000:00:01.2: UHCI Host Controller
[    2.993236] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[    2.994314] uhci_hcd 0000:00:01.2: irq 11, io base 0x00001080
[    2.995567] hub 1-0:1.0: USB hub found
[    2.996428] hub 1-0:1.0: 2 ports detected
 ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module xhci-pci ... [  OK  ]
addons.sh called with params modules
Starting eudev daemon - modules
ln: /lib/li[    3.027959] udevd[4627]: starting version 3.2.11
bkm[    3.028986] udevd[4627]: specified group 'tty' unknown
od[    3.029789] udevd[4627]: specified group 'dialout' unknown
[    3.030818] udevd[4627]: specified group 'kmem' unknown
[    3.031814] udevd[4627]: specified group 'input' unknown
.[    3.032587] udevd[4627]: specified group 'video' unknown
[    3.033335] udevd[4627]: specified group 'sgx' unknown
s[    3.033987] udevd[4627]: specified group 'audio' unknown
o[    3.034884] udevd[4627]: specified group 'disk' unknown
[    3.035733] udevd[4627]: specified group 'cdrom' unknown
[    3.036531] udevd[4627]: specified group 'tape' unknown
.[    3.037425] udevd[4627]: specified group 'kvm' unknown
2: File exists
ln: /usr/sbin/udevadm: File exists
Triggering add [    3.044235] udevd[4628]: starting eudev-3.2.11
[    3.046385] udevd[4628]: specified group 'tty' unknown
[    3.047316] udevd[4628]: specified group 'dialout' unknown
[    3.048676] udevd[4628]: specified group 'kmem' unknown
[    3.049571] udevd[4628]: specified group 'input' unknown
events to udev
[    3.051776] udevd[4628]: specified group 'video' unknown
[    3.052637] udevd[4628]: specified group 'sgx' unknown
[    3.053627] udevd[4628]: specified group 'audio' unknown
[    3.054621] udevd[4628]: specified group 'disk' unknown
[    3.055426] udevd[4628]: specified group 'cdrom' unknown
[    3.056739] udevd[4628]: specified group 'tape' unknown
[    3.058944] udevd[4628]: specified group 'kvm' unknown
[    3.071880] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    3.073075] ACPI: Power Button [PWRF]
[    3.076254] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    3.078886] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.080784] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.142261] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[    3.252337] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    3.282416] clocksource: Switched to clocksource tsc
[    3.349187] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    3.550892] usbcore: registered new interface driver usbhid
[    3.554474] usbhid: USB HID core driver
[    3.559704] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3
[    3.567830] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
Insert net driver(Mindspeed only)...
[   13.296621] broadwellnk_synobios: module license 'Synology Inc.' taints kernel.
[   13.298165] Disabling lock debugging due to kernel taint
[   13.307562] synobios open /dev/ttyS1 success
[   13.308500] 2023-6-6 20:43:23 UTC
[   13.309046] synobios: load, major number 201
[   13.309756] Brand: Synology
[   13.310225] Model: DS-3622xs+
[   13.310685] set group disks wakeup number to 4, spinup time deno 7
[   13.311644] synobios cpu_arch proc entry initialized
[   13.312322] synobios crypto_hw proc entry initialized
[   13.313019] synobios syno_platform proc entry initialized
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
[   13.320382] Module [broadwellnk_synobios] is removed. 
[   13.321155] synobios: unload
addons.sh called with params patches
Adjust disks related configs automatically - patches
set maxdisks=6
set internalportcfg=0x3f
get esataportcfg=0
set usbportcfg=0xf00000
maxdisks=6
internalportcfg=0x3f
esataportcfg=0
usbportcfg=0xf00000
Insert synorbd kernel module
Insert synofsbd kernel module
Insert sha256 kernel module
All disk ready or timeout execeed
Assemble args: -u a4f379cc:386e9cd4:05d949f7:b0bbaec7 /dev/sdb1 /dev/sdc1
[   13.419479] md: md0 stopped.
[   13.456856] md: bind<sdc1>
[   13.459625] md: bind<sdb1>
[   13.465182] md/raid1:md0: active with 2 out of 6 mirrors
[   13.481520] md0: detected capacity change from 0 to 8589869056
mdadm: /dev/md0 has been started with 2 drives (out of 6).
Partition Version=9
[   13.592686] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   13.639727] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
 /sbin/e2fsck exists, checking /dev/md0... 
e2fsck 1.44.1 (24-Mar-2018)
/sbin/e2fsck -yvf returns 0
Mounting /dev/md0 /tmpRoot
[   14.419543] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   14.435940] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota
------------upgrade
Begin upgrade procedure
[   14.574730] loop: module loaded
[   14.630274] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities
[   14.704761] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
Failed to found any patch
No upgrade file found
============upgrade
------------bootup-smallupdate
mkdir: can't create directory '/tmpRoot/proc': File exists
mkdir: can't create directory '/tmpRoot/sys': File exists
mkdir: can't create directory '/tmpRoot/dev': File exists
Try bootup smallupdate
No patch exist. Skip Packed Bootup SmallUpdate
Sparse files don't exist. Skip Sparse Bootup SmallUpdate
Finished synoautonano
============bootup-smallupdate
Wait 2 seconds for synology manufactory device
Tue Jun  6 20:43:28 UTC 2023
addons.sh called with params jrExit
/dev/md0 /tmpRoot ext4 rw,relatime,prjquota,rootprjquota,data=ordered 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
root: Start backing up logs in junior mode
[   19.222691] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   19.241791] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
umount: /etc/mtab: No such file or directory
linuxrc.syno executed successfully.
Post init
[   19.478329] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   19.493335] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1,prjquota,rootprjquota

grep: /tmpRoot/usr/share/init/tty.conf: No such file or directory
addons.sh called with params late
Script for fixing missing HW features dependencies and another functions
'/usr/bin/arpl-reboot.sh' -> '/tmpRoot/usr/bin/arpl-reboot.sh'
'/usr/bin/arc-reboot.sh' -> '/tmpRoot/usr/bin/arc-reboot.sh'
'/usr/bin/grub-editenv' -> '/tmpRoot/usr/bin/grub-editenv'
modprobe: ERROR: could not insert 'acpi_cpufreq': No such device
CPU does NOT support CPU Performance Scaling, disabling
CPU Supports SSE4.2, crc32c-intel should load
CPU Supports AES, aesni-intel should load
Starting eudev daemon - late
'/etc/udev/rules.d/50-usb-realtek-net.rules' -> '/tmpRoot/lib/udev/rules.d/50-usb-realtek-net.rules'
'/tmpRoot/lib/systemd/system/multi-user.target.wants/udevrules.service' -> '/lib/systemd/system/udevrules.service'
Adjust disks related configs automatically - late
Adjust maxdisks and internalportcfg automatically
maxdisks=6
internalportcfg=0x3f
usbportcfg=0xf00000
'/etc/extensionPorts' -> '/tmpRoot/etc/extensionPorts'
'/etc/extensionPorts' -> '/tmpRoot/etc.defaults/extensionPorts'
Creating service to exec ethtool
'/usr/sbin/ethtool' -> '/tmpRoot/usr/sbin/ethtool'
Creating service to exec CPU Info
'/usr/sbin/cpuinfo.sh' -> '/tmpRoot/usr/sbin/cpuinfo.sh'
Installing daemon for ACPI button
'/etc/acpi/events/power' -> '/tmpRoot/etc/acpi/events/power'
'/usr/sbin/acpid' -> '/tmpRoot/usr/sbin/acpid'
'/etc/acpi/power.sh' -> '/tmpRoot/etc/acpi/power.sh'
'/tmpRoot/lib/systemd/system/multi-user.target.wants/acpid.service' -> '/usr/lib/systemd/system/acpid.service'
[   20.342648] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[   20.350126] systemd[1]: Detected virtualization kvm.
[   20.352221] systemd[1]: Detected architecture x86-64.

Welcome to Linux!

[   20.364489] systemd[1]: Set hostname to <test-dsm>.
[   21.550122] systemd[1]: Cannot add dependency job for unit syno-mlnx-rdma-modules-load.service, ignoring: Unit syno-mlnx-rdma-modules-load.service is masked.
[   21.552234] systemd[1]: Cannot add dependency job for unit syno-qlogic-rdma-modules-load.service, ignoring: Unit syno-qlogic-rdma-modules-load.service is masked.
[   21.554601] systemd[1]: Cannot add dependency job for unit pkg-synobrm-recovery-restart.service, ignoring: Unit pkg-synobrm-recovery-restart.service failed to load: No such file or directory.
[   21.556979] systemd[1]: Cannot add dependency job for unit SynoLedBrightness.service, ignoring: Unit SynoLedBrightness.service is masked.
[   21.558605] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory.
[   21.560972] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory.
[  OK  ] Reached target Swap.
[   21.565219] systemd[1]: Reached target Swap.
[   21.565774] systemd[1]: Starting Swap.
[  OK  ] Reached target Timers.
[   21.567072] systemd[1]: Reached target Timers.
[   21.567676] systemd[1]: Starting Timers.
[  OK  ] Created slice Root Slice.
[   21.569110] systemd[1]: Created slice Root Slice.
[   21.569743] systemd[1]: Starting Root Slice.
[  OK  ] Created slice synobackup daemon slice.
[   21.571258] systemd[1]: Created slice synobackup daemon slice.
[   21.572021] systemd[1]: Starting synobackup daemon slice.
[  OK  ] Created slice Performance alarm.
[   21.573609] systemd[1]: Created slice Performance alarm.
[   21.574310] systemd[1]: Starting Performance alarm.
[  OK  ] Created slice Python2's slice.
[   21.575785] systemd[1]: Created slice Python2's slice.
[   21.576462] systemd[1]: Starting Python2's slice.
[  OK  ] Created slice RAID Resync Process. ...ing Resync, Repair and Reshape..
[   21.578306] systemd[1]: Created slice RAID Resync Process. Including Resync, Repair and Reshape..
[   21.579496] systemd[1]: Starting RAID Resync Process. Including Resync, Repair and Reshape..
[  OK  ] Created slice SSDP service.
[   21.581421] systemd[1]: Created slice SSDP service.
[   21.582077] systemd[1]: Starting SSDP service.
[  OK  ] Listening on udev Control Socket.
[   21.583550] systemd[1]: Listening on udev Control Socket.
[   21.584291] systemd[1]: Starting udev Control Socket.
[  OK  ] Created slice Synology DSM Storage Service.
[   21.585992] systemd[1]: Created slice Synology DSM Storage Service.
[   21.586812] systemd[1]: Starting Synology DSM Storage Service.
[  OK  ] Created slice BTRFS Space Reclaim.
[   21.588481] systemd[1]: Created slice BTRFS Space Reclaim.
[   21.589224] systemd[1]: Starting BTRFS Space Reclaim.
[  OK  ] Created slice ActiveInsight's slice.
[   21.590834] systemd[1]: Created slice ActiveInsight's slice.
[   21.591676] systemd[1]: Starting ActiveInsight's slice.
[  OK  ] Created slice BTRFS Optimization.
[   21.593473] systemd[1]: Created slice BTRFS Optimization.
[   21.594541] systemd[1]: Starting BTRFS Optimization.
[  OK  ] Created slice Synology Swap Works.
[   21.596757] systemd[1]: Created slice Synology Swap Works.
[   21.597934] systemd[1]: Starting Synology Swap Works.
[  OK  ] Listening on Journal Audit Socket.
[   21.600026] systemd[1]: Listening on Journal Audit Socket.
[   21.601183] systemd[1]: Starting Journal Audit Socket.
[  OK  ] Created slice scemd.
[   21.602834] systemd[1]: Created slice scemd.
[   21.603448] systemd[1]: Starting scemd.
[  OK  ] Created slice System Slice.
[   21.604853] systemd[1]: Created slice System Slice.
[   21.605560] systemd[1]: Starting System Slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[   21.607253] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   21.608120] systemd[1]: Starting system-serial\x2dgetty.slice.
[  OK  ] Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[   21.610255] systemd[1]: Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[   21.611430] systemd[1]: Starting system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[  OK  ] Created slice ScsiTarget's slice.
[   21.613510] systemd[1]: Created slice ScsiTarget's slice.
[   21.614286] systemd[1]: Starting ScsiTarget's slice.
[  OK  ] Created slice Synology Index slice (WAT).
[   21.615969] systemd[1]: Created slice Synology Index slice (WAT).
[   21.616818] systemd[1]: Starting Synology Index slice (WAT).
[  OK  ] Created slice Synology DSM desktop service.
[   21.618644] systemd[1]: Created slice Synology DSM desktop service.
[   21.619518] systemd[1]: Starting Synology DSM desktop service.
[  OK  ] Created slice HybridShare's slice.
[   21.621312] systemd[1]: Created slice HybridShare's slice.
[   21.622132] systemd[1]: Starting HybridShare's slice.
[  OK  ] Created slice SecureSignIn's slice.
[   21.623920] systemd[1]: Created slice SecureSignIn's slice.
[   21.624690] systemd[1]: Starting SecureSignIn's slice.
[  OK  ] Listening on Journal Socket.
[   21.626361] systemd[1]: Listening on Journal Socket.
[   21.627214] systemd[1]: Starting Journal Socket.
[   21.632186] systemd[1]: Mounting Temporary Directory...
         Mounting Temporary Directory...
[   21.633985] systemd[1]: Starting Link coredump path to volume if possible...
         Starting Link coredump path to volume if possible...
[   21.636462] systemd[1]: Starting Set time zone information to kernel...
         Starting Set time zone information to kernel...
[   21.638652] systemd[1]: Starting SED Bootup Action...
         Starting SED Bootup Action...
[   21.640573] systemd[1]: Starting unbind USB device...
         Starting unbind USB device...
[   21.642400] systemd[1]: Starting Journal Socket (/dev/log).
[   21.643729] systemd[1]: Mounting Debug File System...
         Mounting Debug File System...
[   21.645768] systemd[1]: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[  OK  ] Created slice Synology DSM internal service.
[   21.648414] systemd[1]: Created slice Synology DSM internal service.
[   21.650909] systemd[1]: Starting Synology DSM internal service.
[   21.652526] systemd[1]: Starting Disabling fan checking flag ......
         Starting Disabling fan checking flag ......
[  OK  ] Listening on udev Kernel Socket.
[   21.655544] systemd[1]: Listening on udev Kernel Socket.
[   21.656308] systemd[1]: Starting udev Kernel Socket.
[  OK  ] Created slice SMBService's slice.
[   21.658378] systemd[1]: Created slice SMBService's slice.
[   21.659194] systemd[1]: Starting SMBService's slice.
[  OK  ] Created slice FileStation's slice.
[   21.660890] systemd[1]: Created slice FileStation's slice.
[   21.661877] systemd[1]: Starting FileStation's slice.
[  OK  ] Reached target Paths.
[   21.663551] systemd[1]: Reached target Paths.
[   21.664343] systemd[1]: Starting Paths.
[  OK  ] Created slice User and Session Slice.
[   21.665942] systemd[1]: Created slice User and Session Slice.
[   21.666685] systemd[1]: Starting User and Session Slice.
[  OK  ] Reached target Slices.
[   21.668126] systemd[1]: Reached target Slices.
[   21.668702] systemd[1]: Starting Slices.
[   21.669688] systemd[1]: Starting Synology Task Scheduler Init...
         Starting Synology Task Scheduler Init...
[  OK  ] Created slice SynoFinder's slice.
[   21.672348] systemd[1]: Created slice SynoFinder's slice.
[   21.673106] systemd[1]: Starting SynoFinder's slice.
[   21.674212] systemd[1]: Starting Load ntb_brd module...
         Starting Load ntb_brd module...
[  OK  ] Created slice Package Center Slice.
[   21.676555] systemd[1]: Created slice Package Center Slice.
[   21.677382] systemd[1]: Starting Package Center Slice.
[  OK  ] Started Machine Check Exception Logging Daemon.
[   21.679446] systemd[1]: Started Machine Check Exception Logging Daemon.
[   21.680476] systemd[1]: Starting Machine Check Exception Logging Daemon...
         Starting Machine Check Exception Logging Daemon...
[  OK  ] Created slice Task Scheduler Group.
[   21.683125] systemd[1]: Created slice Task Scheduler Group.
[   21.684051] systemd[1]: Starting Task Scheduler Group.
[  OK  ] Created slice SNMP.
[   21.685770] systemd[1]: Created slice SNMP.
[   21.686370] systemd[1]: Starting SNMP.
[   21.686937] systemd[1]: Started Set project quota ID for /var/log.
[  OK  ] Created slice Shared Folder Sync.
[   21.688750] systemd[1]: Created slice Shared Folder Sync.
[   21.689809] systemd[1]: Starting Shared Folder Sync.
[  OK  ] Created slice OAuthService's slice.
[   21.693133] systemd[1]: Created slice OAuthService's slice.
[   21.693860] systemd[1]: Starting OAuthService's slice.
[   21.694955] systemd[1]: Starting Set boot sequence config...
         Starting Set boot sequence config...
[  OK  ] Created slice Synology Flashcache.
[   21.697678] systemd[1]: Created slice Synology Flashcache.
[   21.698511] systemd[1]: Starting Synology Flashcache.
[  OK  ] Created slice Synology Cache Advisor.
[   21.700177] systemd[1]: Created slice Synology Cache Advisor.
[   21.700957] systemd[1]: Starting Synology Cache Advisor.
[   21.702065] systemd[1]: Starting Set hostname...
         Starting Set hostname...
[   21.703633] systemd[1]: Starting check integrity of rd.gz decompression...
         Starting check integrity of rd.gz decompression...
[  OK  ] Mounted Debug File System.
[   21.706927] systemd[1]: Mounted Debug File System.
[  OK  ] Mounted Temporary Directory.
[   21.708576] systemd[1]: Mounted Temporary Directory.
[  OK  ] Started Set time zone information to kernel.
[   21.710636] systemd[1]: Started Set time zone information to kernel.
[  OK  ] Started SED Bootup Action.
[   21.713490] systemd[1]: Started SED Bootup Action.
[  OK  ] Started unbind USB device.
[   21.715139] systemd[1]: Started unbind USB device.
[  OK  ] Listening on Journal Socket (/dev/log).
[   21.716844] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Started Disabling fan checking flag ....
[   21.719230] systemd[1]: Started Disabling fan checking flag ....
[   21.720732] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[  OK  ] Reached target Sockets.
[   21.724000] systemd[1]: Reached target Sockets.
[   21.725869] systemd[1]: Starting Sockets.
[  OK  ] Reached target Local File Systems.
[   21.728268] systemd[1]: Reached target Local File Systems.
[   21.729559] systemd[1]: Starting Local File Systems.
[   21.737107] systemd[1]: Starting D-Bus System Message Bus...
         Starting D-Bus System Message Bus...
[   21.739253] systemd[1]: Starting D-Bus Session Message Bus...
         Starting D-Bus Session Message Bus...
[   21.741760] systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[   21.743659] systemd[1]: Starting Set boot sequence config for temporary use...
         Starting Set boot sequence config for temporary use...
[   21.745864] systemd[1]: Starting Mount usb fs...
         Starting Mount usb fs...
[  OK  ] Started Load ntb_brd module.
[   21.748576] systemd[1]: Started Load ntb_brd module.
[  OK  ] Started Synology Task Scheduler Init.
[   21.754236] systemd[1]: Started Synology Task Scheduler Init.
[  OK  ] Started Journal Service.
[   21.775407] systemd[1]: Started Journal Service.
[  OK  ] Started Set boot sequence config.
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started Set boot sequence config for temporary use.
[   21.865696] systemd-journald[5696]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Set hostname.
[  OK  ] Started Mount usb fs.
[  OK  ] Started check integrity of rd.gz decompression.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Create Volatile Files and Directories.
         Starting synodsmnotify...
[  OK  ] Reached target Create SDK locks directory.
         Starting Check /etc/synoinfo.conf...
         Starting Check Synology group info consistency...
         Starting Check Synology user info consistency...
         Starting Synology Database Update...
[  OK  ] Started synodsmnotify.
[   22.063267] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[   22.071740] flashcache: flashcache-1.0-2022-09-21-00:34 initialized
[   22.084057] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2022-09-21-00:34-debug initialized
[  OK  ] Started Synology Database Update.
[   22.221424] NET: Registered protocol family 10
[   22.237069] sit: IPv6 over IPv4 tunneling driver
[   22.281313] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   22.283848] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   22.285588] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  OK  ] Started D-Bus Session Message Bus.
[  OK  ] Started D-Bus System Message Bus.
[   22.308423] e1000e: Intel(R) PRO/1000 Network Driver - 3.4.2.4-NAPI
[   22.310140] e1000e: Copyright(c) 1999 - 2019 Intel Corporation.
[   22.321176] dca service started, version 1.12.1
[   22.328119] Intel(R) Gigabit Ethernet Linux Driver - version 5.3.5.22
[   22.329809] Copyright(c) 2007 - 2018 Intel Corporation.
[  OK  ] Started Check /etc/synoinfo.conf.
[   22.415701] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.5.5
[   22.418331] Copyright(c) 1999 - 2019 Intel Corporation.
[   22.439627] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 2.7.29
[   22.443024] i40e: Copyright(c) 2013 - 2018 Intel Corporation.
[   22.466060] tn40xx low_mem_msg proc entry initialized
[   22.469557] tn40xx low_mem_counter proc entry initialized
[   22.471398] tn40xx debug_msg proc entry initialized
[   22.472980] tn40xx: Tehuti Network Driver, 0.3.6.12.3
[   22.517086] Compat-mlnx-ofed backport release: c22af88
[   22.519898] Backport based on mlnx_ofed/mlnx-ofa_kernel-4.0.git c22af88
[   22.523393] compat.git: mlnx_ofed/mlnx-ofa_kernel-4.0.git
[   22.627870] qed_init called
[   22.634443] QLogic FastLinQ 4xxxx Core Module qed 8.33.9.0
[   22.637898] creating debugfs root node
[  OK  ] Started Link coredump path to volume if possible.
         Starting System Logger Daemon...
[   22.648568] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.33.9.0
[   22.694564] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.36 ($DateTime: 2016/06/16 03:53:41 $)
[   22.722977] usbcore: registered new interface driver usb-storage
[  OK  ] Started Load Kernel Modules.
         Starting Apply default and user cus... sysctl.conf kernel variable....
         Starting Insert bnxt module...
         Starting Load Kernel Modules in Kernel Project...
         Mounting Configuration File System...
         Starting Load Fan Modules in Kernel Project...
[  OK  ] Mounted Configuration File System.
[  OK  ] Started Check Synology group info consistency.
[  OK  ] Started Check Synology user info consistency.
[  OK  ] Reached target Synology local user and group ready.
[  OK  ] Reached target Synology synoscheduler functions.
[  OK  ] Reached target User and Group Name Lookups.
         Starting move domain or ldap user p...der to domain or ldap folder....
[  OK  ] Started Apply default and user cust...ed sysctl.conf kernel variable..
         Starting Apply Kernel Variables...
[   22.878967] usbcore: registered new interface driver usblp
[  OK  ] Started Apply Kernel Variables.
[   22.956055] synobios open /dev/ttyS1 success
[   22.957501] 2023-6-6 20:43:32 UTC
[   22.959383] synobios: load, major number 201
[   22.960955] Brand: Synology
[   22.961550] Model: DS-3622xs+
[   22.962092] set group disks wakeup number to 4, spinup time deno 7
[   22.963196] synobios cpu_arch proc entry initialized
[   22.964084] synobios crypto_hw proc entry initialized
[   22.965114] synobios syno_platform proc entry initialized
         Starting Apply kernel variable vm.min-free-kbytes...
         Starting Apply kernel variable kernel-shmmni at least 16384...
         Starting Apply kernel variable vm.kswapd_threads...
         Starting Apply kernel variable kernel.sem at least 1024...
[  OK  ] Started Insert bnxt module.
[  OK  ] Started move domain or ldap user pr...older to domain or ldap folder..
         Starting Adjust NIC sequence...
[  OK  ] Started Apply kernel variable kernel-shmmni at least 16384.
[  OK  ] Started Apply kernel variable vm.kswapd_threads.
[FAILED] Failed to start Adjust NIC sequence.
See "systemctl status SynoInitEth.service" for details.
[   23.079888] AVX2 version of gcm_enc/dec engaged.
[   23.080985] AES CTR mode by8 optimization enabled
[  OK  ] Started Apply kernel variable kernel.sem at least 1024.
[  OK  ] Started Apply kernel variable vm.min-free-kbytes.
[  OK  ] Started Load Kernel Modules in Kernel Project.
         Starting DSM Release Rolling Group ID...
         Starting Software Init Led for support led v2 models...
         Starting Prepare notification cache data...
[  OK  ] Started DSM Release Rolling Group ID.
[  OK  ] Started Software Init Led for support led v2 models.
[   23.980272] Module [adt7475] is removed. 
[  OK  ] Started Prepare notification cache data.
[  OK  ] Started System Logger Daemon.
         Starting Synology Log bootup start...
[DEPEND] Dependency failed for rebuild local user and group db.
[  OK  ] Reached target Synology root filesystem (rw) ready.
         Starting Set Eunit Sequence...
         Starting Umount initrd...
         Starting DSM Boot Health Check...
         Starting syno-cgi-keygen.service...
         Starting Synology check locale...
         Starting Clean UPS config...
         Starting SAS early initial...
         Starting Load AppArmor profiles...
[  OK  ] Reached target Network (Pre).
         Starting Synology Network Daemon...
         Starting Set arp ignore...
         Starting Synology Default TLS Profile...
         Starting DSM Installation ID...
         Starting synodrnode...
[  OK  ] Started Synology Log bootup start.
[  OK  ] Started Clean UPS config.
[  OK  ] Started Set Eunit Sequence.
[  OK  ] Started Set arp ignore.
[  OK  ] Started SAS early initial.
         Starting Synology swap...
[  OK  ] Started Umount initrd.
[  OK  ] Started Synology check locale.
[  OK  ] Started Synology Default TLS Profile.
[  OK  ] Started DSM Installation ID.
[   24.834856] zram: Added device: zram0
[   24.835893] zram: Added device: zram1
[  OK  ] Started Synology Network Daemon.
         Starting Wait for Synology Network to be Configured...
[   25.175519] md: md1 stopped.
[  OK  ] Started Wait for Synology Network to be Configured.
         Starting Synology Network Event Daemon...
[  OK  ] Started Synology Network Event Daemon.
         Starting rc.network...
[  OK  ] Started synodrnode.
[   25.339454] md: bind<sdc2>
[   25.346314] md: bind<sdb2>
[   25.347770] md/raid1:md1: active with 2 out of 6 mirrors
[   25.368257] md1: detected capacity change from 0 to 2147418112
[  OK  ] Started syno-cgi-keygen.service.
[   25.796902] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k 
[   25.800150] zram0: detected capacity change from 0 to 1231028224
[   25.804949] Adding 1202172k swap on /dev/zram0.  Priority:1 extents:1 across:1202172k SS
[  OK  ] Started DSM Boot Health Check.
[   25.809412] zram1: detected capacity change from 0 to 1231028224
[   25.813053] Adding 1202172k swap on /dev/zram1.  Priority:1 extents:1 across:1202172k SS
[  OK  ] Started Synology swap.
         Starting udev Kernel Device Manager...
[  OK  ] Started Load AppArmor profiles.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Reached target System Initialization.
         Starting bootup upgrade sha package...
[  OK  ] Started Serial Getty on ttyS0.
         Starting Serial Getty on ttyS0...
[  OK  ] Reached target Login Prompts.
[  OK  ] Started Synology token manager.
         Starting Synology token manager...
[  OK  ] Started Synology task manager.
         Starting Synology task manager...
[  OK  ] Started bootup upgrade sha package.
[   26.001487] Module [adt7475] is removed. 
[  OK  ] Found device /dev/synoboot2.
[  OK  ] Reached target Synology synoboot2 done.
[  OK  ] Reached target Basic System.
[  OK  ] Started Synology log accounting service.
         Starting Synology log accounting service...
         Starting Service for irq balance...
[  OK  ] Started synobackup daemon.
         Starting synobackup daemon...
         Starting Enable CPU Info...
         Starting Log Rotate Daemon...
         Starting Reload udev rules...
         Starting System Profile Tuning...
         Starting synoconfd daemon...
         Starting Arc force WoL on eth0...
         Starting Samba Environment Setup Unit...
         Starting Synology Schedule Daemon...
         Starting synoindex check if there a...ny synoindex-related packages...
         Starting Login Service...
         Starting Control RC power...
         Starting Write back disk latency to DB...
         Starting Hibernation debug check...
         Starting Synology filesytem check on bootup...
         Starting Synology firmware DLMC...
         Starting WD idle3 timer...
         Starting Synology log notification service...
         Starting always preprocess jobs before any package is started...
[  OK  ] Started Arc force WoL on eth0.
[  OK  ] Started Write back disk latency to DB.
[  OK  ] Started Synology filesytem check on bootup.
[  OK  ] Started WD idle3 timer.
[  OK  ] Started Reload udev rules.
[  OK  ] Started Synology firmware DLMC.
         Starting Synology space service...
[  OK  ] Started Synology Schedule Daemon.
[  OK  ] Started Login Service.
[  OK  ] Started Service for irq balance.
[  OK  ] Started synoconfd daemon.
[  OK  ] Started Hibernation debug check.
[  OK  ] Started Log Rotate Daemon.
[  OK  ] Created slice system-dhclient.slice.
         Starting DHCP client init...
[  OK  ] Started Control RC power.
[  OK  ] Started DHCP client init.
         Starting eth0 DHCP Client...
[  OK  ] Started eth0 DHCP Client.
[  OK  ] Started rc.network.
         Starting Set Multiple Geteway...
         Starting Check if network is ready...
         Starting PPPoE...
[  OK  ] Stopped Synology Task Scheduler Vmtouch.
[  OK  ] Started Synology Task Scheduler Vmtouch.
         Starting Synology Task Scheduler Vmtouch...
[  OK  ] Started PPPoE.
[  OK  ] Started Set Multiple Geteway.
[  OK  ] Reached target Network.
         Starting Redis data structure server for webapi...
         Starting Out of Band Management Status Check...
         Starting Synology SCGI SocketIO...
         Starting Network Time Service...
         Starting findhost daemon...
[FAILED] Failed to start Out of Band Management Status Check.
See "systemctl status syno-oob-check-status.service" for details.
[  OK  ] Started always preprocess jobs before any package is started.
[  OK  ] Reached target Hook on root ready.
         Starting SMBService's service unit...
         Starting ActiveInsight's service unit...
         Starting Python2's service unit...
         Starting SecureSignIn's service unit...
[  OK  ] Started findhost daemon.
[  OK  ] Started System Profile Tuning.
[  OK  ] Stopped eth0-info DHCP Client v6.
[  OK  ] Stopped eth0-client DHCP Client v6.
[  OK  ] Stopped eth0-pd DHCP Client v6.
[FAILED] Failed to start synoindex check if ... any synoindex-related packages.
See "systemctl status synoindex-checkpackage.service" for details.
[DEPEND] Dependency failed for synoindex workerd.
[DEPEND] Dependency failed for synoindex notifyd.
[DEPEND] Dependency failed for synoindexd.
[DEPEND] Dependency failed for synoindex mediad.
[DEPEND] Dependency failed for synomkthumbd.
[DEPEND] Dependency failed for synoindex plugind.
[DEPEND] Dependency failed for synoindex scand.
[DEPEND] Dependency failed for synomkflvd.
[  OK  ] Started Redis data structure server for webapi.
[  OK  ] Started Synology SCGI.
         Starting Synology SCGI...
[  OK  ] Started Samba Environment Setup Unit.
[  OK  ] Started Network Time Service.
[  OK  ] Started Synology log notification service.
[   28.039868] Module [adt7475] is removed. 
[  OK  ] Started Enable CPU Info.
[  OK  ] Started Python2's service unit.
[  OK  ] Started SMBService's service unit.
[  OK  ] Started Check if network is ready.
[  OK  ] Reached target Network is Online.
         Starting NetBIOS name server...
         Starting broadcast synorelayd boot state...
         Starting Avahi daemon...
         Starting register ds region by ip...
         Starting Entry for WS-Transfer and WS-Discovery Server...
         Starting VPN Client...
         Stopping Synology Task Scheduler Vmtouch...
[  OK  ] Stopped Synology Task Scheduler Vmtouch.
[  OK  ] Started Synology Task Scheduler Vmtouch.
         Starting Synology Task Scheduler Vmtouch...
[  OK  ] Started Entry for WS-Transfer and WS-Discovery Server.
[  OK  ] Started VPN Client.
[  OK  ] Created slice system-dhclient6.slice.
         Starting eth0-info DHCP Client v6...
[  OK  ] Started Avahi daemon.
[  OK  ] Started Load Fan Modules in Kernel Project.
[  OK  ] Started eth0-info DHCP Client v6.
[  OK  ] Started broadcast synorelayd boot state.
[  OK  ] Started ActiveInsight's service unit.
         Stopping Synology Task Scheduler Vmtouch...
[  OK  ] Stopped Synology Task Scheduler Vmtouch.
[  OK  ] Started Synology Task Scheduler Vmtouch.
         Starting Synology Task Scheduler Vmtouch...
[  OK  ] Started register ds region by ip.
[  OK  ] Started NetBIOS name server.
[  OK  ] Started WS-Discovery Server.
         Starting WS-Discovery Server...
[   30.166131] md: md2 stopped.
[   30.172186] md: bind<sdc5>
[   30.172910] md: bind<sdb5>
[   30.174284] md/raid1:md2: active with 2 out of 2 mirrors
[  OK  ] Started SecureSignIn's service unit.
[   30.189175] md2: detected capacity change from 0 to 989220438016
         Stopping eth0 DHCP Client...
[  OK  ] Stopped eth0 DHCP Client.
         Starting eth0 DHCP Client...
[  OK  ] Started eth0 DHCP Client.
         Stopping Synology Task Scheduler Vmtouch...
[  OK  ] Stopped Synology Task Scheduler Vmtouch.
[  OK  ] Started Synology Task Scheduler Vmtouch.
         Starting Synology Task Scheduler Vmtouch...
[   31.327834] flashcache_syno: /dev/vg1/volume_1 exclude check success
[   31.868021] raid6: sse2x1   gen() 10523 MB/s
[   31.886009] raid6: sse2x1   xor()  9728 MB/s
[   31.903007] raid6: sse2x2   gen() 17804 MB/s
[   31.920006] raid6: sse2x2   xor() 11884 MB/s
[   31.937007] raid6: sse2x4   gen() 20515 MB/s
[   31.954007] raid6: sse2x4   xor() 12244 MB/s

test-dsm login: [   31.971008] raid6: avx2x1   gen() 28289 MB/s
[   31.988007] raid6: avx2x1   xor() 19703 MB/s
[   32.005007] raid6: avx2x2   gen() 35000 MB/s
[   32.022008] raid6: avx2x2   xor() 21730 MB/s
[   32.039007] raid6: avx2x4   gen() 39636 MB/s
[   32.056006] raid6: avx2x4   xor() 22945 MB/s
[   32.056595] raid6: using algorithm avx2x4 gen() 39636 MB/s
[   32.057442] raid6: .... xor() 22945 MB/s, rmw enabled
[   32.058149] raid6: using avx2x2 recovery algorithm
[   32.105200] xor: automatically using best checksumming function:
[   32.115006]    avx       : 27428.000 MB/sec
[   32.199115] Btrfs loaded, crc32c=crc32c-intel
[   32.206345] BTRFS: device label 2023.06.04-20:58:15 v42962 devid 1 transid 449 /dev/mapper/cachedev_0
[   32.209331] BTRFS info (device dm-2): enabling auto syno reclaim space
[   32.210193] BTRFS info (device dm-2): use ssd allocation scheme
[   32.211126] BTRFS info (device dm-2): using free space tree
[   32.211876] BTRFS info (device dm-2): using free block group cache tree
[   32.212779] BTRFS info (device dm-2): has skinny extents
[   32.292739] BTRFS info (device dm-2): BTRFS: root of syno feature tree is null
[   34.934681] Synotify use 16384 event queue size
[   34.935453] Synotify use 16384 event queue size
[   35.580165] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use)
[   35.821321] ata2.00: configured for UDMA/100
[   35.821899] ata2: EH complete
[   35.942822] ata3.00: configured for UDMA/100
[   35.943497] ata3: EH complete
[   36.282939] ext2: synoboot2 mounted, process=synopkicompatsy
[   36.287465] EXT2-fs (synoboot2): warning: mounting unchecked fs, running e2fsck is recommended
[   36.291791] synoboot2 unmounted, process=synopkicompatsy
[   36.727104] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[   37.438092] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(732710c9fc98).
[   37.456437] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
[   37.466266] iSCSI:target_core_device.c:613:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[   37.467894] iSCSI:target_core_configfs.c:5777:target_init_dbroot db_root: cannot open: /etc/target
[   37.469201] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[   37.518925] iSCSI:target_core_file.c:152:fd_attach_hba RODSP plugin for fileio is enabled.
[   37.520155] iSCSI:target_core_file.c:159:fd_attach_hba ODX Token Manager is enabled.
[   37.521164] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
[   37.522318] iSCSI:target_core_ep.c:795:ep_attach_hba RODSP plugin for epio is enabled.
[   37.523405] iSCSI:target_core_ep.c:802:ep_attach_hba ODX Token Manager is enabled.
[   37.617969] workqueue: max_active 1024 requested for vhost_scsi is out of range, clamping between 1 and 512
[   37.848296] iSCSI:qla_dbg.c:2605:ql_log qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k.
[   37.878366] [11394]: ocs_fc_lio: ocs_scsi_ini_driver_init:1104::disabling the app heartbeat timeout detection
[   37.879830] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1225::ocs_fc_lio: driver version 12.2.385.0
[   37.881400] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1227::  Module parameters:
[   37.883048] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1228::  Initiator = 0
[   37.884289] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1229::  Target = 1
[   37.885653] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1230::  ctrlmask = 0x000a
[   37.886797] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1231::  loglevel = 5
[   37.887949] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1232::  logmask = 0x0000
[   37.889154] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1233::  ramlog_size = 1048576
[   37.890911] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1234::  rq_threads = 0
[   37.892030] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1235::  wwn_bump = 0
[   37.893110] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1236::  topology = 0
[   37.894092] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1237::  speed = 0
[   37.895103] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1238::  holdoff_link_online = 2
[   37.896253] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1239::  enable_hlm = 0
[   37.897310] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1240::  hlm_group_size = 8
[   37.898401] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1241::  max_remote_nodes = 2048
[   37.900853] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1242::  ethernet_license = 0
[   37.903650] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1243::  num_scsi_ios = 8192
[   37.906463] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1244::  dif_separate = 0
[   37.909138] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1245::  tow_feature = 0
[   37.911863] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1246::  tow_io_size = 65536
[   37.914589] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1247::  tow_xri_cnt = 512
[   37.917281] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1248::  queue_topology = eq cq rq cq mq $nulp($nwq(cq wq:ulp=$rpt1)) cq wq:len=256:class=1
[   37.922096] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1249::  rq_selection_policy = 0
[   37.925028] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1250::  rr_quanta = 1
[   37.927702] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1251::  filter_ref = 0,0,0,0
[   37.930682] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1252::  cq_process_limit = 64
[   37.933624] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1253::  explicit_buffer_list = 0
[   37.936689] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1254::  external_loopback = 0
[   37.939625] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1255::  target_io_timer = 0
[   37.942503] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1256::  target_wqe_timer = 30
[   37.945369] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1257::  ddump_saved_size = 0
[   37.948121] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1258::  hal_war_version = (null)
[   37.951009] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1259::  hw_cmpl_context = 1
[   37.953782] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1260::  watchdog_timeout = 0
[   37.956694] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1261::  heartbeat_cpu_mask = 0x0
[   37.959593] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1262::  sliport_healthcheck = 0
[   37.962766] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1263::  disable_fec = 0
[   37.965518] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1264::  enable_dpp = 1
[   37.968165] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1265::  sliport_pause_errors = disabled
[   37.971474] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1266::  enable_bbcr = 1
[   37.974313] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1267::  fw_dump_type = 1
[   37.976972] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1268::  enable_auto_recovery = 0
[   37.979843] [11394]: ocs_fc_lio: ocs_driver_print_module_params:1269::  cfg_suppress_rsp = 1
[   37.982820] [11399]: ocs_fc_lio: ocs_thread_thunk:1046::ocs_proxy running
[   38.866304] 8021q: 802.1Q VLAN Support v1.8
[   38.867751] 8021q: adding VLAN 0 to HW filter on device eth0
[   42.367995] fuse init (API version 7.23)
AuxXxilium commented 1 year ago

Is it working while you are in loader and not in dsm?

andreheuer commented 1 year ago

I think I have found the root cause. As I wanted to use the new QEMU agent addon, I have configured the VM to use QEMU agent (which does not #309). However, I did not change the configuration back and it seems like that Proxmox does not send an (ACPI?) shutdown signal to the VM as a kind of fallback if the agent was not found.

After re-configuring the VM to not use QEMU agent, the shutdown works as expected.