search

AuxXxilium / arc

Arc is a customized Redpill Loader for DSM 7.x (Xpenology) with enhanced Hardwaresupport, Addons, guided (semi-automated) Installation and more. Multiple customization options are built-in. It is modified to run on different Hardware (Wiki for more Informations). Commercial use is not permitted and strictly forbidden!
https://auxxxilium.tech
GNU General Public License v3.0
2.03k stars 235 forks source link

DSM does not start, appears on the network for 3 seconds and disappears. #416

Closed upais closed 1 year ago

upais commented 1 year ago

After building the bootloader and rebooting, DSM does not start, appears on the network for 3 seconds and disappears. BIOS is configured according to information from the wiki. Tried Direct boot.

MSI Z590 TORPEDO i5 11400 i225-v\i219-v HDD in the first slot. HDD without partitions.

Screenshots: 2023-07-21 213831 photo_2023-07-21_21-37-59 photo_2023-07-21_21-37-49

AuxXxilium commented 1 year ago

Try DS3622xs+ please and report back.

upais commented 1 year ago

The same. Tried DS3615, DS3622, DS920, UEFI and Legacy. It is interesting that on I219 the LEDs are off, but on I225 one is on, the other is blinking, but DSM does not appear on the network.

AuxXxilium commented 1 year ago

do you have checked the IP in your router?

you can try to set: "Load Kernel: power" in Arc - Arc Options

upais commented 1 year ago

Of course, I also tried with Synology Assistant. Yesterday I was doing this for half a day, I tried all the current loaders. The result is always one. I will not try again, I returned the old motherboard. Let it be for information to others that there are some problems on the MSI Z590 TORPEDO board.

Did you have an LGA1200 on hand for testing? If so, can you write motherboards that you can recommend?

AuxXxilium commented 1 year ago

is use h670m-itx/ax with 12500