search

AuxXxilium / arc

Arc is a customized Redpill Loader for DSM 7.x (Xpenology) with enhanced Hardwaresupport, Addons, guided (semi-automated) Installation and more. Multiple customization options are built-in. It is modified to run on different Hardware (Wiki for more Informations). Commercial use is not permitted and strictly forbidden!
https://auxxxilium.tech
GNU General Public License v3.0
1.94k stars 225 forks source link

Bad ram recognition #420

Closed Rick4hun closed 1 year ago

Rick4hun commented 1 year ago

I have a Topton N1 pro with a non- booting xpenology, we are discussed about my issues, tried anything i see at wiki and you wrote, nothing happens, it still stuck at boot the loader, but never boot, and never visible on LAN. So i am tried your new loader, and hope, it will once booting without issues, but now get error message about my RAM quantity. I have 16GB DDR4 RAM, and use a 32GB TF card, so i am wondering about that message! Thanks! IMG_20230724_232514

AuxXxilium commented 1 year ago

TF/MMC/SD Boot is not possible. Use USB or SATA

Rick4hun commented 1 year ago

My bios shows, it's an mass storage, so it can boot completely same, as other usb flash driver, sata ssd, ot any other device. IMG_20230725_121513

Rick4hun commented 1 year ago

If i burn image to a 32GB TF (microSD card), and burn once again a flash drive, i get same result, loader can boot all two, and i can choose what media boot first. Loader can boot from TF card without any issues. IMG_20230725_121917

AuxXxilium commented 1 year ago

if you can boot from both, everything is correct. the ram message can be ignored if you have 16gb installed.

AuxXxilium commented 1 year ago

Try it with: LKM „dev“ and connect your cable to second LAN Port. It looks like some adapter don‘t accept mac changes.

Rick4hun commented 1 year ago

Tried, nothing changed. Additionally rebuild loader and then booted IMG_20230725_143427 with an usb2lan adapter (r8152), same result, booted, compile, looks like boot the loader, but not visible on lan. Same cable tried an mini ITX board, all went first without issues.

AuxXxilium commented 1 year ago

so it‘s a kernel panic caused by cpu or board. other options:

Rick4hun commented 1 year ago

HT on AMD site is SVT mode, that disabled with others you wrote at wiki, after many more unsuccesful boot, tried to disabled more pci lanes, until i got only one LAN card.., memory remap is a very strange thing, because omv, truenas, freenas, rockstor, win11, win server 22, nextcloud+ casa os, etc etc works with many more feature disabled you requested, but tried to boot all after a bios default settings, same result, others can boot and work with default settings. Just tried to find memory remap, but found only "write CRC enable" and "dram ECC enable" , that set to OFF, dot nottings happened, same result only! finally doesn't affercted. Tried memtest, over 3 hours i gor final green PASS word on screen.. Tried more different size/ vendor memory modules, same result. Tried directboot, doesn't affected.