search

Avamander / arducam-osd

Automatically exported from code.google.com/p/arducam-osd
1 stars 0 forks source link

Connection errors #45

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1.Connect OSD to CPU via FTDI cable
2.Open and run osd config tool and try to update charset or firmware
3.

What is the expected output? What do you see instead?
I just want to be able to configure my osd but I keep getting the error message 
"Failed to talk to bootloader"

What version of the product are you using? On what operating system?
Latest minimosd
Latest config tool
Windows XP

Please provide any additional information below.
Both sides of my minimosd are powered. Also, when I try to go into device 
manager to find the correct COM port, it does not show up there.

Original issue reported on code.google.com by reid.wil...@gmail.com on 12 Jan 2013 at 3:55

GoogleCodeExporter commented 9 years ago 
If you can't find the device on COM port probably your issue is on the FTDI 
adapter.
The first step is checking if it's working without attaching it to OSD board.

Original comment by sbeni...@gmail.com on 12 Jan 2013 at 9:11

GoogleCodeExporter commented 9 years ago 
Ok, I had to install the drivers for the Farsi cable. Now my CPU regognizes the 
osd and I can update the charger and firmware. Whenever I try to use the osd it 
says "update charset"? I have updated it many times. Also, if I hit the read 
from osd button, an error message says " EEPROM mapping outdated" then it 
starts the automatic update. After a minute it says "could not retrieve 
configuration files" then it says "EEPROM updated". If I hit the button again, 
it starts this all over again.

Original comment by reid.wil...@gmail.com on 13 Jan 2013 at 2:06

GoogleCodeExporter commented 9 years ago 
Ftdi*

Original comment by reid.wil...@gmail.com on 13 Jan 2013 at 2:07

GoogleCodeExporter commented 9 years ago 
Charset*

Original comment by reid.wil...@gmail.com on 13 Jan 2013 at 2:07

GoogleCodeExporter commented 9 years ago 
Your Configurator Tool is on a different version that is not matching the 
ArduCAM Hex file. Please, use only the official configurator from our download 
base.
http://code.google.com/p/arducam-osd/downloads/list

About the Update Charset: 
http://code.google.com/p/arducam-osd/wiki/Troubleshooting

Original comment by sbeni...@gmail.com on 13 Jan 2013 at 10:15

GoogleCodeExporter commented 9 years ago

Original comment by sbeni...@gmail.com on 8 Feb 2013 at 2:42