search

AxMod3DPrint / Migbot-Firmware

Migbot Prusa i3 configured firmware
GNU General Public License v3.0
9 stars 8 forks source link

BlTouch and Bowden additions #1

Open SirLolius opened 5 years ago

SirLolius commented 5 years ago

Do you happen to have your files that you use with the bowden setup? Thank you in advance :)

AxMod3DPrint commented 5 years ago

Do you mean the STL models for the Bowden setup? Or something else?

sjardine commented 5 years ago

I would be interested in your Marlin configuration and the STL files for the extruder. I am working on a Bowden upgrade...

sjardine commented 5 years ago

I found the STL. Looks good!

turtiustrek commented 5 years ago

I've done this mod a while back and its pretty good with the firmware posted here. Though I re-downloaded the repository and dumped it again . Initially this firmware was fine , but when it came to printing, the feedrate (x,y,z) dropped to an absolute 0 when the extruder was above 160C. Any help would be great

AxMod3DPrint commented 5 years ago

This firmware is now well out of date. Unfortunately we do not have a Migbot to run tests on anymore, as such it's recommended to download Marlin and transfer the settings across. If there is still a problem, I'd suggest that an issue is posted on the Marlin github page.

On Wed, 13 Mar 2019, 12:27 MohammadMubin, notifications@github.com wrote:

I've done this mod a while back and its pretty good with the firmware posted here. Though I re-downloaded the repository and dumped it again . Initially this firmware was fine , but when it came to printing, the feedrate (x,y,z) dropped to an absolute 0 when the extruder was above 160C. Any help would be great

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/AxMod3DPrint/Migbot-Firmware/issues/1#issuecomment-472401327, or mute the thread https://github.com/notifications/unsubscribe-auth/AQULnrInByoOo2gbbXu9fX6yjOTBxEKrks5vWO6ggaJpZM4WNKAo .

turtiustrek commented 5 years ago

Thanks for the response! I have copied over all the settings to 1.1.9 and all seems good :)