search

AzonInc / Doorman

ESP32-S3 based Intercom Gateway (TCS:Bus / Koch TC:Bus / Niko / Analogue Systems)
GNU General Public License v3.0
23 stars 1 forks source link

Produktion #1

Open AzonInc opened 3 months ago

AzonInc commented 3 months ago

This issue keeps track of interested people for PCBA orders.

[!NOTE] In case you're interested in ordering one just leave a comment with your requirements (Screw Terminal Length - default 9P) and I'll reserve one for you in the next order. Would be nice to know the destination country as well.

Wenn jemand interessiert ist kann er/sie/es das hier als Kommentar schreiben zusätzlich sagen ob eine 3 Pin, 9 Pin oder keine Schraubklemme gewünscht ist. Gut zu wissen wäre auch noch das Zielland.

Preorder List:

[!IMPORTANT] At the moment Doorman doesn't support the a/b bus wires as power source. Only via P-wire or external power supply.

Derzeit unterstützt Doorman noch keine Stromversorgung über die a/b Busleitung, nur über die P-Leitung oder externe Spannungsversorgung.

DE

Name ESP32 Screw Terminal Enclosure Revision Destination
@NonProgrammerCharacter S3-WROOM-1-N16R2 9P / 1.4 DE
@NonProgrammerCharacter S3-WROOM-1-N16R2 9P / 1.4 DE
@Wlad2288 S3-WROOM-1-N16R2 9P / 1.4 DE
@K-r-i-s-t-i-a-n S3-WROOM-1-N16R2 9P / 1.4 DE

CH

Name ESP32 Screw Terminal Enclosure Revision Destination
@peralta S3-WROOM-1-N8R8 9P / 1.3 CH
@peralta S3-WROOM-1-N16R2 9P / 1.4 CH
@calibanorg S3-WROOM-1-N16R2 9P / 1.4 CH
@zopieux S3-WROOM-1-N16R2 9P / 1.4 CH
@smartforcedev S3-WROOM-1-N16R2 9P / 1.4 CH
@samdolt S3-WROOM-1-N16R2 9P / 1.4 CH
@samdolt S3-WROOM-1-N16R2 9P / 1.4 CH
@filo87 S3-WROOM-1-N16R2 9P / 1.4 CH
@azzieg S3-WROOM-1-N16R2 9P / 1.4 CH
zopieux commented 3 weeks ago

Yeah, I suppose the P screw is the bell return wire, not the 24V :(

zopieux commented 2 weeks ago

No dice. :frowning_face: While the P wire is indeed connected on the BVS20, whatever arrives at my place is just a two-wire cable, and I confirm the other two are the door bell button.

there is a beeping noise interference on the line only operates smoothly with P

I'm not sure I understand what that means. Is the point that we can try running the ESP from just a+b, but it introduces noise in the a+b comms? Are you talking about the voice transport (affecting all residents), or the protocol messages being unreliable?

If it means e.g. the software needs to send messages a few time before it goes through, I think I can live with that. However if you're saying this makes my neighbors' intercom noisy, that's obviously a no go. :-)

Thanks for testing!

matejbart commented 1 week ago

@AzonInc Bitte 1x die 9P Variante (DE), danke.