search

Azure / AzureStackHCI-EvalGuide

Welcome to the Azure Stack HCI Evaluation Guide!
Creative Commons Attribution 4.0 International
141 stars 84 forks source link

Cannot create cluster in Azure VM - stuck at "define networks" #50

Closed jonathan-vella closed 3 years ago

jonathan-vella commented 3 years ago

hey folks, seems like i have hit a brick wall. i cannot get past the "define networks" section. behavior is very erratic; sometime i get lucky and the following error is displayed:

"We couldn’t configure network adapters. Please try again. Error: Connecting to remote server 11.0.0.6 failed with the following error message : WinRM cannot complete the operation. Verify that the specified computer name is valid, that the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows access from this computer. By default, the WinRM..." --> to eliminate this i have created a gpo which will allow some traffic

In some other cases, WAC itself crashes. When this happens WAC displays thh following "Error Couldn't get user info. Source Go to source. Type Error Message ajax error

And in some others, some NICs do get configured. What is common is that CPU usage across all HCI nodes goes up to 25%. Any hints or ideas? thanks.

mattmcspirit commented 3 years ago

Hi - thanks for raising this - I've seen this issue recently too, and we're investigating. The hope is that we can fix soon.

joekellyco commented 3 years ago

I am seeing similar issues now where I am unable to provision the virtual switches: It just spins on the networks that I was not provisioning switches on. I've tried a few ways now, and I think this is a WAC issue

image

image

liamfoneill commented 3 years ago

image

+1 on this issue for me too. Are there any workarounds currently?

liamfoneill commented 3 years ago

Got a bit further. The CredSSP message popped up and when I clicked 'Yes' I got this failure on the 6 NICs image

I fixed this by setting the locale to en-us but now I'm back to the original problem. Its trying to create vSwitchs for 10 minutes the day errors out. There is certainly bugs in the Cluster creation wizard.

liamfoneill commented 3 years ago

@mattmcspirit did we ever get to the bottom of this?

mohaom commented 3 years ago

with last "Cluster Creation" extension update it worked smoothly for me :)

liamfoneill commented 3 years ago

can confirm that the new cluster creation extension fixed it for me too

mattmcspirit commented 3 years ago

Great - thanks. I can also confirm that updating to the very latest Cluster Creation extension fixes the deployment issues, so please update accordingly. I'll update steps to reflect the need to have an updated extension.