Hack intercom to open the building door remotely and allow access to lift without being home. (good for deliveries when not home)

B1tMaster / haas-config

SmartHouse

1 stars 0 forks source link

Hack intercom to open the building door remotely and allow access to lift without being home. (good for deliveries when not home) #89

Open B1tMaster opened 6 years ago

B1tMaster commented 6 years ago

According to manual I found on internet. Tripping wires 1 & 3 may just do the trick.

B1tMaster commented 6 years ago

94727_EN Esquemario 4N Citymax V_05_03.pdf

B1tMaster commented 6 years ago

conversation on how to simulate a button press: http://forum.micasaverde.com/index.php?topic=13154.0

B1tMaster commented 6 years ago

Need to figure out how to simulate a button press and release:

These could be useful:

https://www.youtube.com/watch?v=sVml02kP3DU

https://www.aliexpress.com/item/DC3-5V-DC12V-Mini-Relay-Receiver-DC3V-DC12V-Transmitter-PCB-Power-ON-Transmitting-3-7V-4/32668575529.html

https://forum.athom.com/discussion/4265/12v-dc-zwave-switch

https://www.amazon.com/SMAKN®-Channel-Isolated-Optocoupler-Trigger/dp/B00PFA83RW/ref=sr_1_fkmr0_3?ie=UTF8&qid=1522381450&sr=8-3-fkmr0&keywords=Demiawaking+12V+2+Channel+Relay+Module+Optocoupler+H+%2F+L+Level+Trigger+for+Arduino+Raspberry

https://www.amazon.com/SMAKN®-SRD-12VDC-SL-C-Channel-Level-Module/dp/B00MMW0XWY/ref=pd_sbs_23_7?_encoding=UTF8&pd_rd_i=B00MMW0XWY&pd_rd_r=3924K718CJ6GJVQD7TSA&pd_rd_w=psoyL&pd_rd_wg=d4RyM&psc=1&refRID=3924K718CJ6GJVQD7TSA

B1tMaster commented 6 years ago

https://community.home-assistant.io/t/how-to-simulate-an-intercom-button-press-need-to-hack-door-intercom-to-open-entry-door-into-my-building-for-delivery/48684

B1tMaster commented 6 years ago

Learn about Tasmodo 👍 https://www.youtube.com/watch?v=c2IUIUnxjUY

https://www.youtube.com/watch?v=ONFhXM5R

https://www.youtube.com/watch?v=sVml02kP3DU

https://www.youtube.com/watch?v=MOEmVYn4I8A

Reprogram Sonoff switch with mqtt adriano code: https://www.youtube.com/watch?v=bODVelG4FKI

roscoe81 commented 5 years ago

I think I've done what you're looking for with the Fermax door station. You can find the details here: https://github.com/roscoe81/Doorbell-Monitor

neolamb93 commented 1 year ago

I'm amazed at all your work, i have a fermax loft basic, and only 2 wires are connected to the board... how is it even working if the diagram asks for at least 3 ? xD will have to play with it...