BASLQC / procfw

Automatically exported from code.google.com/p/procfw
1 stars 0 forks source link

Crash occuring when UMD is inserted #575

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago
What steps will reproduce the problem?
1. Insert UMD into the PSP
2. Switch on PSP
3. Wait few seconds until the PSP crash

What is the expected output? What do you see instead?
Start a game from any of my UMD.
I see a load screen and the PSP shut down.
When inserting the UMD with the PSP on, the UMD is not see by the PSP and an 
error message "Can't read the disc" is shown.

What version of the product are you using? On what operating system?
PSP1004 - Custom Firmware 6.60 PRO-C2

Please provide any additional information below.

Original issue reported on code.google.com by girardea...@gmail.com on 22 Aug 2013 at 5:33

GoogleCodeExporter commented 9 years ago
Check if this occurs on OFW. If yes - it' a hardware issue and not a PRO CFW 
issue.

Original comment by piotrekhenry on 23 Aug 2013 at 6:33

GoogleCodeExporter commented 9 years ago
Please check if it does the same on OFW

Original comment by devnonam...@gmail.com on 25 Aug 2013 at 11:48

GoogleCodeExporter commented 9 years ago
Hi,
I have tested without the custum firmware, on the official 6.60.
It's still not working.
It mays be a hardware issue, but I don't know why.
It was working perfectly before the installation of the firmware and it didn't 
take any  hit since the installation.
As the ISO work well, I will re install the firmware and maybe one day, it will 
work again.

Thanks !!

Original comment by girardea...@gmail.com on 26 Aug 2013 at 7:18

GoogleCodeExporter commented 9 years ago
This is probably only a coincidence; as it is a hardware issue, I'll close the 
issue.

Original comment by devnonam...@gmail.com on 26 Aug 2013 at 8:57