changes for notebooks

[prjemian]

@mdwyman: Thanks for these review comments:

Notebooks -- worked through hello_world, basic-motor-scaler-scan, custom_plan, and databroker_analysis. However, I didn't do all of the "Challenges"/"Next Steps", but I did look through them. a. From basic-motor-scaler-scan, I had to set the names of scaler channels using the caQtDM screen, but the iocgp caqtdm script bad link (6-1 instead of 6-2). I've attached a pic b. Also from basic-motor-scaler-scan: For the challenges -- is the plan to give attendees time to work them individually, work on them collaboratively or will it be instructor-led/prompted? c. Also in challenges: maybe put a link to logger info for 4th challenge (you do have documentation references in custom_plan.ipynb) d. In custom_plan.ipynb, in 3rd cell ("scaler1.select_channels(["I0","diode"])"), had to go back to caQtDM to add names I0 and diode for two of the scaler channels (don't know if this was intended) e. In custom_plan.ipynb, same question about 'Next Steps' as for challenges in previous notebook? Individual, collaborative, or instructor-led/prompted?

• [x] start_caQtDM_gp shell script points to wrong version, same for similar ad script
• [x] describe time expectations in Challenges for each notebook.
• [x] link to logger documentation
• [x] define all scaler channel names in basic-motor-scaler-scan.py
• [x] create patch shell script

[prjemian]

Time expectations are described in the course overview. They will be refined following the first session of this class. Roughly

• Hour 1
  • Welcome (10 minutes)
  • Check VMs are working (10 minutes)
  • spot check (should check before class to fix problems) or follow as observer
  • apply updates & patches (5 minutes)
  • start Jupyter lab and run hello_world.ipynb notebook (10 minutes)
  • discussion (remaining time, ~25 minutes)
• Hour 2 - basic-motor-scaler-scan.ipynb notebook
  • Connect the motor (10 minutes)
  • Connect the scaler (10 minutes)
  • Prepare to scan (10 minutes)
  • First scan (10 minutes)
  • discussion (10 minutes)
  • break (10 minutes)
• Hour 3 - basic-motor-scaler-scan.ipynb notebook (continued)
  • Fix a few problems (10 minutes)
  • Scan with a different counting time : staging (10 minutes)
  • Custom plan with configurable count time (10 minutes)
  • Challenges and Discussion (30 minutes)