search

BETAFPV / BETAFPV.github.io

11 stars 3 forks source link

Red lights on Cetus. #4

Closed Luniano closed 3 years ago

Luniano commented 3 years ago

Red lights. I accidentally clicked on all 3 deleting data from Cetus. (In the configurator v3). And then I installed the firmware as in the video. Then the red lights lit up and after that nothing can fix it. I installed various firmwares, including litesilver frsky e.t.c. Drone came to life, but it never became stable. I also installed the very first firmware that I found here (Cetus_Brushed.bin). Where can I find additional firmware for FC, sensor and OSD.

wenzhicode commented 3 years ago

Hi, Luniano. Don't worry about it, you can work it out. The firmware is Here, download three bin files(FC / Sensor / OSD); On the Flasher page, select the TAB option and download the corresponding firmware to the board, eg: selset Sensor tab,load FlowSensor_2021-05-12.bin, and click download; Flash all three firmware are the same way, you need to hold down the key, power it up, and then select the corresponding serial port number in configure.

Luniano commented 3 years ago

Thank you so much! I managed to install the firmware. Just burned out in the grass. I'm waiting for a new one and will continue to use it.