search

BETAFPV / BETAFPV_Configurator

GNU General Public License v3.0
79 stars 11 forks source link

Cetus pro V1.1 multiple firmware troubles #13

Closed tano68 closed 1 year ago

tano68 commented 2 years ago

Hello, Hard time here. After many mistakes done navigating through all the variation of the configurator (V3 & co), I'm with a firmware blank Cetus. What's working : -Read parameters and configure with configurator V1.0.0 and the older version -Load separate firmware whit V1.1.0 -Erase firmware whit V3 What's not working : -Load OSD and Sensor firmware in Configurator V1.1.0 -Connect to Configurator V1.1.0, even after updating the main firmware -Can't read the drone parameters a second time with configurator V1.0.0

Long story short, my cetus is blinking frenetically red lack of firmware. I sincerly tried everything found here and elsewhere and nothing solved my issue. Thanks

tano68 commented 2 years ago

I forget also, sensor and OSD firmware aren’t recognised by Configurator V1.1.0 (the main reason I can’t load them)

HWT662988 commented 2 years ago

Cetus pro V1.1 should use the firmware which named 1.1.x ,do not upgrade to 1.2.x because it is for the Cetus pro V1.2 board . image

tano68 commented 2 years ago

That’s what I’ve done. Your answer is off topic. my problems are : 1 no OSD and sensor firmwares in my Cetus 2 can’t load them because the ones available aren’t recognised by configurator 3 each different versions of configurator allow me to do different task which aren’t available in an other.

wenzhicode commented 2 years ago

I forget also, sensor and OSD firmware aren’t recognised by Configurator V1.1.0 (the main reason I can’t load them)

Hi, tano68. which version firmware did you try to flash and where you download them ?

wenzhicode commented 2 years ago

That’s what I’ve done. Your answer is off topic. my problems are : 1 no OSD and sensor firmwares in my Cetus 2 can’t load them because the ones available aren’t recognised by configurator 3 each different versions of configurator allow me to do different task which aren’t available in an other.

So I guess it maybe be not load the correct firmware to the board. Can you take a picture of FC board so I can try what you done in that board? Thanks.

wenzhicode commented 2 years ago

Hello, Hard time here. After many mistakes done navigating through all the variation of the configurator (V3 & co), I'm with a firmware blank Cetus. What's working : -Read parameters and configure with configurator V1.0.0 and the older version -Load separate firmware whit V1.1.0 -Erase firmware whit V3 What's not working : -Load OSD and Sensor firmware in Configurator V1.1.0 -Connect to Configurator V1.1.0, even after updating the main firmware -Can't read the drone parameters a second time with configurator V1.0.0

Long story short, my cetus is blinking frenetically red lack of firmware. I sincerly tried everything found here and elsewhere and nothing solved my issue. Thanks

Thanks for your trying, I can't agree more that this process is a hard time. You can also contract our sale-supporter and get a refresh if you don't want a another hard try.