After the ACC state has been set to ON, the control algorithm must start to accelerate or brake the vehicle to reach the desired speed. The setspeed velocity shall be reached within 30 seconds.
Test: Start the drive and select the maximum setspeed once the minimum speed to switch on ACC is reached. Measure how long it takes to reach the target speed and verify that it is lower than the described limit. Change the setspeed to its minimum value to check the duration again.
IamCyBo
commented
6 months ago
After the ACC state has been set to ON, the control algorithm must start to accelerate or brake the vehicle to reach the desired speed. The setspeed velocity shall be reached within 30 seconds.
Test: Start the drive and select the maximum setspeed once the minimum speed to switch on ACC is reached. Measure how long it takes to reach the target speed and verify that it is lower than the described limit. Change the setspeed to its minimum value to check the duration again.