change in schematic - Githubissues

BOTwot / Dhere_pcb_mod_v1

0 stars 0 forks source link

Open aadeshpise opened 5 years ago

aadeshpise commented 5 years ago

1)change footprints of all resistors to 10.16 mm from 5.08 mm 2)add slider/SPDT switch 3)h bridge p channel connect source to VCC

DeshmukhMalhar commented 5 years ago

DO we need that extra space for resistors ?
- I think we can do 7.62mm or 300 thou
Remember, switch should not include motor power.

rptshri commented 5 years ago

no changes yet made for the input switch

aadeshpise commented 5 years ago

FOR JLC design i suggest to add three via in front of mosfets and 4 test jumpers ? , also on board fuse 10A

aadeshpise commented 5 years ago

@DeshmukhMalhar clear point motor power? because switch is just connected to vcc trail

DeshmukhMalhar commented 5 years ago

@aadeshpise I think you need to explain more clearly, in human English language.

DeshmukhMalhar commented 5 years ago

DO NOT CREATE MULTIPLE ISSUES FOR SAME PROBLEM! conflicts with #1

aadeshpise commented 5 years ago

What does it means "switch should not include motor power " pls clarify

DeshmukhMalhar commented 5 years ago

What does it means "switch should not include motor power " pls clarify

You should not use the switch to switch power going to MOSFETS, and inherently to motor, The switches we use are not capable of that load.

PLEASE FOLLOW FORMAL DISCUSSION RULES