3g-cdma web gui settings not saved

BackupGGCode / wl500g

ASUS WL-5xx RT-N1x Oleg's based custom firmware

0 stars 0 forks source link

3g-cdma web gui settings not saved #210

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago

What steps will reproduce the problem?
1. Take wl500gpv2
2. flash it with 1.9.2.7-rtn-r2775
3. connect 3g-cdma modem, tried with mtc connect 3g cdma-450
4. go to web interface, USB network app,--> 3g/cdma 
5. change drop down "Modem type" to cdma/EVDO
6. click finish -- device reboots -- nothing changed

What version of the product are you using?
1.9.2.7-rtn-r2775

Please provide any additional information below.
Also, config file in flash fs, /tmp/ppp/peers/wan0_chat,
Includes extra lines which cause problems: 
Line with SAY
Line with AT+GDCONT (of course, this is not gprs modem)
cheers

Original issue reported on code.google.com by maximo...@gmail.com on 22 Mar 2011 at 11:24

GoogleCodeExporter commented 9 years ago

You need to change "Autodetect device" to "No".
Possibly your modem is not detected as CDMA device and not found in the list of 
known modems /usr/share/modem/modems.conf. 

Also please read http://wl500g.info/showthread.php?t=19865&langid=3

Original comment by rssdev10@gmail.com on 25 Mar 2011 at 6:44

Added labels: Type-Support
Removed labels: Type-Defect

GoogleCodeExporter commented 9 years ago

The latest firmware that works normal with 3G CDMA modem Novatel U720 is 2710. 
All newer cannot connect.

Original comment by ser.novo...@gmail.com on 26 Mar 2011 at 9:00

GoogleCodeExporter commented 9 years ago

Please never "mix" the issues. r2710 is 2.4 based d-branch, while current issue 
discuss 2.6 based rtn-branch.

Original comment by lly.dev on 26 Mar 2011 at 9:18

GoogleCodeExporter commented 9 years ago

Try r2857 with Novatel U720. 
Also, if your modem is absent in the list of known modems 
/usr/share/modem/modems.conf, please inform us about the correct record.

Original comment by rssdev10@gmail.com on 27 Mar 2011 at 5:12

GoogleCodeExporter commented 9 years ago

I tried 2863, problem still exist. 2710 works ok.

Original comment by ser.novo...@gmail.com on 6 Apr 2011 at 8:01

GoogleCodeExporter commented 9 years ago

Modem type is not changed after reboot, it is always GPRS/EDGE/UMTS/HSPDA. 
Please fix this bug, we can't use CDMA modems with firmware newer than 2710.

Original comment by ser.novo...@gmail.com on 14 Apr 2011 at 11:02

GoogleCodeExporter commented 9 years ago

is it so hard to fix this issue???

Original comment by ser.novo...@gmail.com on 12 May 2011 at 6:32

GoogleCodeExporter commented 9 years ago

Seems to be rssdev10 simply has no free time for now.

Have you tried r2968?

Original comment by lly.dev on 12 May 2011 at 12:14

GoogleCodeExporter commented 9 years ago

We suppose that the described problem was conditioned by incorrectly selected 
modem detection mode. Now all possibilities to ignoring this parameter were 
eliminated.

Original comment by rssdev10@gmail.com on 16 May 2011 at 6:24

Changed state: Done

GoogleCodeExporter commented 9 years ago

It is still not fixed. CDMA modem cannot connect, after several time rebooting 
sometimes it connects, but after disconnect, modem can't connect again. Why you 
don't want to come back to previous modem detection? It works fine! r2710 
connect and reconnect without any problems.

Original comment by sergiyla...@gmail.com on 5 Sep 2011 at 6:57