Closed GoogleCodeExporter closed 9 years ago
You are done something wrong. You have to get more knowledge in iptables. Try
to read wl500g.info forum & similar resources.
Original comment by lly.dev
on 10 Oct 2012 at 6:24
probably your web server either blocks incoming packets from wan ip addresses,
or have no route to send replies back to them via same router gateway.
Original comment by themiron.ru
on 10 Oct 2012 at 8:29
I don't have any knowledge in the Iptables, but I have setup NUMEROUS routers
and more complex PORT FORWARDING for many years already, and I don't know why
this one should be any different. It's just a simple PORT FORWARDING that I'm
doing.
Also, keeping everything THE SAME, and changing routers only, everything works,
and it's only when I use this router in question that I'm having problems with..
Lastly, i had DD-WRT installed on this router before jumping to WL500G.. I also
had this same problem w/ DDWRT Firmware and it involved a lot of fidling w/ the
router, and adding FIREWALL COMMAND lines etc, just to get this PORT FORWARDING
to work.. that's the reason why I switched to this firmware... unfortunately it
still has issues :(
Bottom line, THERE ARE NO PROBLEMS with my SETUP, webserver, and all.. I CAN
REPEATEDLY TEST THIS and PROVE this using a totally different router w/
standard firmware. Infact i USE a totally different Router (TPLINK 740N) on a
regular basis when i'm not testing / playing around w/ custom firmware routers
such as this, and everything works fine.
Original comment by cleve...@gmail.com
on 10 Oct 2012 at 8:36
Sorry, we unable to provide personal support.
Original comment by lly.dev
on 10 Oct 2012 at 5:37
it's ok.. i was just hoping this would pop out a known issue or something.. but
it seems i'm the only one experiencing this(?).. strange indeed.
im gona go over everything.... but i doubt it will yield a different result...
Original comment by cleve...@gmail.com
on 11 Oct 2012 at 4:20
Original issue reported on code.google.com by
cleve...@gmail.com
on 10 Oct 2012 at 4:52