BackupGGCode / wl500g

ASUS WL-5xx RT-N1x Oleg's based custom firmware
0 stars 0 forks source link

RT-N10U B1 - not working in client mode wireless #365

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago
What steps will reproduce the problem?
On RT-N10U B1 with 1.9.2.7-rtn-r4656 I do the following:
- factory default restore
- system setup > operation mode > set to access point
- wireless > interface > set all the appropriate g mode security configurations 
for the router to which is connecting
- wireless > bridge > set ap mode to hybrid; and add the mac of the router to 
which is connecting
- wireless > advanced > set extended mode to Ethernet bridge
- ip config > lan > i use a static ip for the ap

What happens ?
When i go in status & log > wifi it keeps switching between 
connecting/connected.
Command wl rssi returns a weird value for the first time, and then it doesn't 
return anything at all.
AP fails to connect to the router.
Same thing happens regardless of the wireless encryption used.

Now if I do exactly the same configs on a WL-500gP V2 with 1.9.2.7-d-r3328, 
everything works as expected.
Is this another Broadcom confidentiality on adapter documentation ? 

Original issue reported on code.google.com by chrisdb...@gmail.com on 14 Nov 2012 at 4:43

GoogleCodeExporter commented 9 years ago
I have the same problem on my WL-500GP. r5450

Original comment by zsergey...@gmail.com on 23 Jun 2014 at 6:50

GoogleCodeExporter commented 9 years ago
=\

Original comment by zsergey...@gmail.com on 23 Jul 2014 at 9:10