S.T.A.G.E Letters

[DeckardKane]

Big glowing letters that say "S.T.A.G.E."

If it ends up being something we assist with, probably pretty simple LED job, lay out some LED strips to spell S.T.A.G.E., put some diffusive material over top, maybe if we wanted to get extra fancy we could control via OSC/QLab and have the letters be somewhat reactive to what's currently happening on stage (e.g. in a tense moment the letters turn red, etc)

[DeckardKane]

Panic Build (Blaze It) Update 4/20/24

• These are happening, and will likely be integrated into the Charlie-Hulk panels?

[DeckardKane]

Work Session Update 4/25/24

• We did some lighting tests with the coroplast panels on Charlie-Hulk - it looks fabulous!
• We'll be using low-density (30 LEDs/meter) strip for this, as it looks good with that density, any more would be unnecessary.
• I've knocked out the wiring for the strips for the "E", but the rest still need doing!

[DeckardKane]

Update 5/8/24

• Here's the list from Mace with all the lengths of (low density) LED strip we need to cut. The E is already done!

[DeckardKane]

More details (LED counts, strip ordering)

~552 pixels in total (not counting the bonus center top panel)

S

• [x] 1 x 26" (~20 pixels)
• [x] 1 x 24" (~19 pixels)
• [x] 1 x 21" (16 pixels)

T

• [x] 1 x 14" (11 pixels)
• [x] 3 x 25" (19 pixels)
• [x] 1 x 28" (~22 pixels)
• [x] 2 x 31" (24 pixels)

A

• [x] 2 x 10" (8 pixels?)
• [x] 2 x 11" (9 pixels)
• [x] 7 x 25" (~19 pixels, going with 19 instead of 20, just trying to conserve LED strip, hopefully that won't be a problem?)

G

• [x] 2 x 30" (23 pixels)
• [x] 1 x 27" (21 pixels)
• [x] 2 x 24" (19 pixels)

E

• [x] 1 x 13" (10 pixels)
• [x] 1 x 15" (12 pixels)
• [x] 1 x 22" (17 pixels)
• [x] 2 x 31" (24 pixels)

Bonus: Top piece for center panel

• [/] 7 x 28" (~21 pixels, again, could bump up by one, not cutting more until we're sure about sizing)