BarkinSpider
commented
2 years ago It is probably a MPP clone, if so, see if any of those settings work.
On Mon, Mar 21, 2022, 10:07 AM test2a @.***> wrote:
hey. i own a phocos any-grid inverter 5Kw and it supports rs-232 connection.
i have bought a rs-232 to usb cable but using a raspberry pi and serial monitors, i get no data at any of the standard baud rates. is there any check i can perform to see at what baud rate/parameters it is using? any way to brute force the parameters?
i would love to get a read out of the data but sadly there is only a bluetooth android app which is realtime only. it does not record any stuff
— Reply to this email directly, view it on GitHub https://github.com/BarkinSpider/SolarShed/issues/9, or unsubscribe https://github.com/notifications/unsubscribe-auth/APZVK2XG4DYSQ3AWIQVRD4TVBCNFLANCNFSM5RIFNETA . You are receiving this because you are subscribed to this thread.Message ID: @.***>
hey. i own a phocos any-grid inverter 5Kw and it supports rs-232 connection.
i have bought a rs-232 to usb cable but using a raspberry pi and serial monitors, i get no data at any of the standard baud rates. is there any check i can perform to see at what baud rate/parameters it is using? any way to brute force the parameters?
i would love to get a read out of the data but sadly there is only a bluetooth android app which is realtime only. it does not record any stuff