CrazyRadio PA hardware bricked by flasher

I just received a new CrazyRadio PA in the mail, and attempted to follow this tutorial to flash it today, and ran into the following problem:

root@kali:~/tools/keysniffer/nrf-research-firmware$ make sdcc --model-large --std-c99 -c src/main.c -o bin/main.rel sdcc --model-large --std-c99 -c src/usb.c -o bin/usb.rel sdcc --model-large --std-c99 -c src/usb_desc.c -o bin/usb_desc.rel sdcc --model-large --std-c99 -c src/radio.c -o bin/radio.rel sdcc --xram-loc 0x8000 --xram-size 2048 --model-large bin/main.rel bin/usb.rel bin/usb_desc.rel bin/radio.rel -o bin/dongle.ihx objcopy -I ihex bin/dongle.ihx -O binary bin/dongle.bin objcopy --pad-to 26622 --gap-fill 255 -I ihex bin/dongle.ihx -O binary bin/dongle.formatted.bin objcopy -I binary bin/dongle.formatted.bin -O ihex bin/dongle.formatted.ihx

root@kali:~/tools/keysniffer/nrf-research-firmware$ sudo make install ./prog/usb-flasher/usb-flash.py bin/dongle.bin [2016-08-22 11:56:57.790] Looking for a compatible device that can jump to the Nordic bootloader [2016-08-22 11:56:57.803] Looking for a device running the Nordic bootloader [2016-08-22 11:56:59.788] Writing image to flash Traceback (most recent call last): File "./prog/usb-flasher/usb-flash.py", line 101, in dongle.read(0x81, 64, usb_timeout) File "/usr/lib/python2.7/dist-packages/usb/core.py", line 659, in read intf.bInterfaceNumber, AttributeError: 'NoneType' object has no attribute 'bInterfaceNumber' Makefile:27: recipe for target 'install' failed make: *\ [install] Error 1

Now, when plugging the device back into my system, it isn't even registered in lsusb, so it appears that the dongle has been bricked by the flasher included in this repo. I'll be attempting to fix it with a Teensy later on today if I can find one in my toolkit.

BastilleResearch / keysniffer

CrazyRadio PA hardware bricked by flasher #1