BeamCtrl
commented
2 years ago will be addressed as part of #22, note that to read the error log you need to cat ./RAM/err, it is not an executable file but an human readable of error and command printouts.
Describe the bug I get RAM disk errors after installing and webserver does not start. Maybe the same issue as in #17.
To Reproduce I have a raspberry pi 3 I downloaded Raspberry Pi Os Lite Legacy from here: https://downloads.raspberrypi.org/raspios_oldstable_lite_armhf/images/raspios_oldstable_lite_armhf-2021-12-02/2021-12-02-raspios-buster-armhf-lite.zip and write the pi-image to sd-card. After initial boot I enabled ssh-server with raspi-config and changed timezone.
Then I ran these commands: sudo apt-get update sudo apt-get upgrade sudo apt-get install git git clone https://github.com/BeamCtrl/Airiana cd Airiana sudo python ./install.py
After reboot I edit /etc/systemd/system/airiana.service and added "TCP" to commandline option. Then I edited the ipconfig file with correct ip and port for my Systemair Internet Access Module.
Expected behavior Airiana webserver starts properly
Screenshots pi@airiana:~/Airiana $ ./watch
Additional context Add any other context about the problem here. Run "sudo python ./install.py"
pi@raspberrypi:~/Airiana $ sudo python ./install.py Installing the AirianaCores Hit:1 http://archive.raspberrypi.org/debian buster InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Reading package lists... Done Reading package lists... Done Building dependency tree Reading state information... Done The following additional packages will be installed: gir1.2-glib-2.0 javascript-common libexpat1-dev libgirepository-1.0-1 libjs-jquery libjs-sphinxdoc libjs-underscore libpython-all-dev libpython-dev libpython2-dev libpython2.7 libpython2.7-dev python-all python-all-dev python-asn1crypto python-cffi-backend python-configparser python-crypto python-cryptography python-dbus python-dev python-entrypoints python-enum34 python-gi python-ipaddress python-keyring python-keyrings.alt python-pip-whl python-secretstorage python-setuptools python-six python-wheel python-xdg python2-dev python2.7-dev Suggested packages: apache2 | lighttpd | httpd python-crypto-doc python-cryptography-doc python-cryptography-vectors python-dbus-dbg python-dbus-doc python-enum34-doc python-gi-cairo gnome-keyring libkf5wallet-bin gir1.2-gnomekeyring-1.0 python-gdata python-keyczar python-secretstorage-doc python-setuptools-doc The following NEW packages will be installed: gir1.2-glib-2.0 javascript-common libexpat1-dev libgirepository-1.0-1 libjs-jquery libjs-sphinxdoc libjs-underscore libpython-all-dev libpython-dev libpython2-dev libpython2.7 libpython2.7-dev python-all python-all-dev python-asn1crypto python-cffi-backend python-configparser python-crypto python-cryptography python-dbus python-dev python-entrypoints python-enum34 python-gi python-ipaddress python-keyring python-keyrings.alt python-pip python-pip-whl python-secretstorage python-setuptools python-six python-wheel python-xdg python2-dev python2.7-dev 0 upgraded, 36 newly installed, 0 to remove and 0 not upgraded. Need to get 36.3 MB of archives. After this operation, 62.9 MB of additional disk space will be used. Get:1 http://archive.raspberrypi.org/debian buster/main armhf python-pip-whl all 18.1-5+rpt1 [1,591 kB] Get:3 http://archive.raspberrypi.org/debian buster/main armhf python-pip all 18.1-5+rpt1 [215 kB] Get:2 http://raspbian.trivini.no/raspbian buster/main armhf libgirepository-1.0-1 armhf 1.58.3-2 [78.8 kB] Get:4 http://raspbian.trivini.no/raspbian buster/main armhf gir1.2-glib-2.0 armhf 1.58.3-2 [143 kB] Get:5 http://raspbian.trivini.no/raspbian buster/main armhf javascript-common all 11 [6,120 B] Get:6 http://raspbian.trivini.no/raspbian buster/main armhf libexpat1-dev armhf 2.2.6-2+deb10u1 [127 kB] Get:7 http://raspbian.trivini.no/raspbian buster/main armhf libjs-jquery all 3.3.1~dfsg-3+deb10u1 [332 kB] Get:8 http://raspbian.trivini.no/raspbian buster/main armhf libjs-underscore all 1.9.1~dfsg-1+deb10u1 [100.0 kB] Get:9 http://raspbian.trivini.no/raspbian buster/main armhf libjs-sphinxdoc all 1.8.4-1 [95.9 kB] Get:10 http://raspbian.trivini.no/raspbian buster/main armhf libpython2.7 armhf 2.7.16-2+deb10u1 [873 kB] Get:11 http://raspbian.trivini.no/raspbian buster/main armhf libpython2.7-dev armhf 2.7.16-2+deb10u1 [30.9 MB] Get:14 http://raspbian.raspberrypi.org/raspbian buster/main armhf libpython-all-dev armhf 2.7.16-1 [1,064 B] Get:15 http://raspbian.raspberrypi.org/raspbian buster/main armhf python-all armhf 2.7.16-1 [1,044 B] Get:17 http://raspbian.raspberrypi.org/raspbian buster/main armhf python2-dev armhf 2.7.16-1 [1,216 B] Get:18 http://raspbian.raspberrypi.org/raspbian buster/main armhf python-dev armhf 2.7.16-1 [1,192 B] Get:19 http://raspbian.raspberrypi.org/raspbian buster/main armhf python-all-dev armhf 2.7.16-1 [1,068 B] Get:12 http://raspbian.trivini.no/raspbian buster/main armhf libpython2-dev armhf 2.7.16-1 [20.9 kB] Get:13 http://raspbian.trivini.no/raspbian buster/main armhf libpython-dev armhf 2.7.16-1 [20.9 kB] Get:16 http://raspbian.trivini.no/raspbian buster/main armhf python2.7-dev armhf 2.7.16-2+deb10u1 [291 kB] Get:20 http://raspbian.trivini.no/raspbian buster/main armhf python-asn1crypto all 0.24.0-1 [78.1 kB] Get:21 http://raspbian.trivini.no/raspbian buster/main armhf python-cffi-backend armhf 1.12.2-1 [69.4 kB] Get:22 http://raspbian.trivini.no/raspbian buster/main armhf python-configparser all 3.5.0b2-1 [59.2 kB] Get:23 http://raspbian.trivini.no/raspbian buster/main armhf python-crypto armhf 2.6.1-9+b1 [248 kB] Get:24 http://raspbian.trivini.no/raspbian buster/main armhf python-enum34 all 1.1.6-2 [35.3 kB] Get:25 http://raspbian.trivini.no/raspbian buster/main armhf python-ipaddress all 1.0.17-1 [18.1 kB] Get:26 http://raspbian.trivini.no/raspbian buster/main armhf python-six all 1.12.0-1 [15.7 kB] Get:27 http://raspbian.trivini.no/raspbian buster/main armhf python-cryptography armhf 2.6.1-3+deb10u2 [184 kB] Get:28 http://raspbian.trivini.no/raspbian buster/main armhf python-dbus armhf 1.2.8-3 [95.7 kB] Get:29 http://raspbian.trivini.no/raspbian buster/main armhf python-entrypoints all 0.3-1 [5,444 B] Get:30 http://raspbian.trivini.no/raspbian buster/main armhf python-gi armhf 3.30.4-1 [208 kB] Get:31 http://raspbian.trivini.no/raspbian buster/main armhf python-secretstorage all 2.3.1-2 [13.8 kB] Get:32 http://raspbian.trivini.no/raspbian buster/main armhf python-keyring all 17.1.1-1 [47.1 kB] Get:33 http://raspbian.trivini.no/raspbian buster/main armhf python-keyrings.alt all 3.1.1-1 [18.3 kB] Get:34 http://raspbian.trivini.no/raspbian buster/main armhf python-setuptools all 40.8.0-1 [382 kB] Get:35 http://raspbian.trivini.no/raspbian buster/main armhf python-wheel all 0.32.3-2 [19.3 kB] Get:36 http://raspbian.trivini.no/raspbian buster/main armhf python-xdg all 0.25-5 [35.9 kB] Fetched 36.3 MB in 6s (5,736 kB/s) Extracting templates from packages: 100% Selecting previously unselected package libgirepository-1.0-1:armhf. (Reading database ... 41464 files and directories currently installed.) Preparing to unpack .../00-libgirepository-1.0-1_1.58.3-2_armhf.deb ... Unpacking libgirepository-1.0-1:armhf (1.58.3-2) ... Selecting previously unselected package gir1.2-glib-2.0:armhf. Preparing to unpack .../01-gir1.2-glib-2.0_1.58.3-2_armhf.deb ... Unpacking gir1.2-glib-2.0:armhf (1.58.3-2) ... Selecting previously unselected package javascript-common. Preparing to unpack .../02-javascript-common_11_all.deb ... Unpacking javascript-common (11) ... Selecting previously unselected package libexpat1-dev:armhf. Preparing to unpack .../03-libexpat1-dev_2.2.6-2+deb10u1_armhf.deb ... Unpacking libexpat1-dev:armhf (2.2.6-2+deb10u1) ... Selecting previously unselected package libjs-jquery. Preparing to unpack .../04-libjs-jquery_3.3.1~dfsg-3+deb10u1_all.deb ... Unpacking libjs-jquery (3.3.1~dfsg-3+deb10u1) ... Selecting previously unselected package libjs-underscore. Preparing to unpack .../05-libjs-underscore_1.9.1~dfsg-1+deb10u1_all.deb ... Unpacking libjs-underscore (1.9.1~dfsg-1+deb10u1) ... Selecting previously unselected package libjs-sphinxdoc. Preparing to unpack .../06-libjs-sphinxdoc_1.8.4-1_all.deb ... Unpacking libjs-sphinxdoc (1.8.4-1) ... Selecting previously unselected package libpython2.7:armhf. Preparing to unpack .../07-libpython2.7_2.7.16-2+deb10u1_armhf.deb ... Unpacking libpython2.7:armhf (2.7.16-2+deb10u1) ... Selecting previously unselected package libpython2.7-dev:armhf. Preparing to unpack .../08-libpython2.7-dev_2.7.16-2+deb10u1_armhf.deb ... Unpacking libpython2.7-dev:armhf (2.7.16-2+deb10u1) ... Selecting previously unselected package libpython2-dev:armhf. Preparing to unpack .../09-libpython2-dev_2.7.16-1_armhf.deb ... Unpacking libpython2-dev:armhf (2.7.16-1) ... Selecting previously unselected package libpython-dev:armhf. Preparing to unpack .../10-libpython-dev_2.7.16-1_armhf.deb ... Unpacking libpython-dev:armhf (2.7.16-1) ... Selecting previously unselected package libpython-all-dev:armhf. Preparing to unpack .../11-libpython-all-dev_2.7.16-1_armhf.deb ... Unpacking libpython-all-dev:armhf (2.7.16-1) ... Selecting previously unselected package python-all. Preparing to unpack .../12-python-all_2.7.16-1_armhf.deb ... Unpacking python-all (2.7.16-1) ... Selecting previously unselected package python2.7-dev. Preparing to unpack .../13-python2.7-dev_2.7.16-2+deb10u1_armhf.deb ... Unpacking python2.7-dev (2.7.16-2+deb10u1) ... Selecting previously unselected package python2-dev. Preparing to unpack .../14-python2-dev_2.7.16-1_armhf.deb ... Unpacking python2-dev (2.7.16-1) ... Selecting previously unselected package python-dev. Preparing to unpack .../15-python-dev_2.7.16-1_armhf.deb ... Unpacking python-dev (2.7.16-1) ... Selecting previously unselected package python-all-dev. Preparing to unpack .../16-python-all-dev_2.7.16-1_armhf.deb ... Unpacking python-all-dev (2.7.16-1) ... Selecting previously unselected package python-asn1crypto. Preparing to unpack .../17-python-asn1crypto_0.24.0-1_all.deb ... Unpacking python-asn1crypto (0.24.0-1) ... Selecting previously unselected package python-cffi-backend. Preparing to unpack .../18-python-cffi-backend_1.12.2-1_armhf.deb ... Unpacking python-cffi-backend (1.12.2-1) ... Selecting previously unselected package python-configparser. Preparing to unpack .../19-python-configparser_3.5.0b2-1_all.deb ... Unpacking python-configparser (3.5.0b2-1) ... Selecting previously unselected package python-crypto. Preparing to unpack .../20-python-crypto_2.6.1-9+b1_armhf.deb ... Unpacking python-crypto (2.6.1-9+b1) ... Selecting previously unselected package python-enum34. Preparing to unpack .../21-python-enum34_1.1.6-2_all.deb ... Unpacking python-enum34 (1.1.6-2) ... Selecting previously unselected package python-ipaddress. Preparing to unpack .../22-python-ipaddress_1.0.17-1_all.deb ... Unpacking python-ipaddress (1.0.17-1) ... Selecting previously unselected package python-six. Preparing to unpack .../23-python-six_1.12.0-1_all.deb ... Unpacking python-six (1.12.0-1) ... Selecting previously unselected package python-cryptography. Preparing to unpack .../24-python-cryptography_2.6.1-3+deb10u2_armhf.deb ... Unpacking python-cryptography (2.6.1-3+deb10u2) ... Selecting previously unselected package python-dbus. Preparing to unpack .../25-python-dbus_1.2.8-3_armhf.deb ... Unpacking python-dbus (1.2.8-3) ... Selecting previously unselected package python-entrypoints. Preparing to unpack .../26-python-entrypoints_0.3-1_all.deb ... Unpacking python-entrypoints (0.3-1) ... Selecting previously unselected package python-gi. Preparing to unpack .../27-python-gi_3.30.4-1_armhf.deb ... Unpacking python-gi (3.30.4-1) ... Selecting previously unselected package python-secretstorage. Preparing to unpack .../28-python-secretstorage_2.3.1-2_all.deb ... Unpacking python-secretstorage (2.3.1-2) ... Selecting previously unselected package python-keyring. Preparing to unpack .../29-python-keyring_17.1.1-1_all.deb ... Unpacking python-keyring (17.1.1-1) ... Selecting previously unselected package python-keyrings.alt. Preparing to unpack .../30-python-keyrings.alt_3.1.1-1_all.deb ... Unpacking python-keyrings.alt (3.1.1-1) ... Selecting previously unselected package python-pip-whl. Preparing to unpack .../31-python-pip-whl_18.1-5+rpt1_all.deb ... Unpacking python-pip-whl (18.1-5+rpt1) ... Selecting previously unselected package python-pip. Preparing to unpack .../32-python-pip_18.1-5+rpt1_all.deb ... Unpacking python-pip (18.1-5+rpt1) ... Selecting previously unselected package python-setuptools. Preparing to unpack .../33-python-setuptools_40.8.0-1_all.deb ... Unpacking python-setuptools (40.8.0-1) ... Selecting previously unselected package python-wheel. Preparing to unpack .../34-python-wheel_0.32.3-2_all.deb ... Unpacking python-wheel (0.32.3-2) ... Selecting previously unselected package python-xdg. Preparing to unpack .../35-python-xdg_0.25-5_all.deb ... Unpacking python-xdg (0.25-5) ... Setting up javascript-common (11) ... Setting up python-enum34 (1.1.6-2) ... Setting up python-crypto (2.6.1-9+b1) ... Setting up libpython2.7:armhf (2.7.16-2+deb10u1) ... Setting up python-wheel (0.32.3-2) ... Setting up python-asn1crypto (0.24.0-1) ... Setting up python-all (2.7.16-1) ... Setting up python-six (1.12.0-1) ... Setting up python-xdg (0.25-5) ... Setting up python-dbus (1.2.8-3) ... Setting up libexpat1-dev:armhf (2.2.6-2+deb10u1) ... Setting up python-setuptools (40.8.0-1) ... Setting up libgirepository-1.0-1:armhf (1.58.3-2) ... Setting up python-pip-whl (18.1-5+rpt1) ... Setting up libjs-jquery (3.3.1~dfsg-3+deb10u1) ... Setting up python-ipaddress (1.0.17-1) ... Setting up libjs-underscore (1.9.1~dfsg-1+deb10u1) ... Setting up python-cffi-backend (1.12.2-1) ... Setting up libpython2.7-dev:armhf (2.7.16-2+deb10u1) ... Setting up python-keyrings.alt (3.1.1-1) ... Setting up python-cryptography (2.6.1-3+deb10u2) ... Setting up python-pip (18.1-5+rpt1) ... Setting up gir1.2-glib-2.0:armhf (1.58.3-2) ... Setting up libjs-sphinxdoc (1.8.4-1) ... Setting up libpython2-dev:armhf (2.7.16-1) ... Setting up python2.7-dev (2.7.16-2+deb10u1) ... Setting up python-gi (3.30.4-1) ... Setting up python2-dev (2.7.16-1) ... Setting up python-secretstorage (2.3.1-2) ... Setting up libpython-dev:armhf (2.7.16-1) ... Setting up python-configparser (3.5.0b2-1) ... Setting up python-dev (2.7.16-1) ... Setting up libpython-all-dev:armhf (2.7.16-1) ... Setting up python-entrypoints (0.3-1) ... Setting up python-all-dev (2.7.16-1) ... Setting up python-keyring (17.1.1-1) ... Processing triggers for man-db (2.8.5-2) ... Processing triggers for libc-bin (2.28-10+rpt2+rpi1) ... Reading package lists... Done Building dependency tree Reading state information... Done python-dev is already the newest version (2.7.16-1). python-dev set to manually installed. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Done Building dependency tree Reading state information... Done The following additional packages will be installed: dh-python libpython3-dev libpython3.7-dev python3-distutils python3-lib2to3 python3.7-dev The following NEW packages will be installed: dh-python libpython3-dev libpython3.7-dev python3-dev python3-distutils python3-lib2to3 python3.7-dev 0 upgraded, 7 newly installed, 0 to remove and 0 not upgraded. Need to get 48.0 MB of archives. After this operation, 72.9 MB of additional disk space will be used. Get:1 http://raspbian.trivini.no/raspbian buster/main armhf python3-lib2to3 all 3.7.3-1 [76.7 kB] Get:2 http://raspbian.trivini.no/raspbian buster/main armhf python3-distutils all 3.7.3-1 [142 kB] Get:3 http://raspbian.trivini.no/raspbian buster/main armhf dh-python all 3.20190308 [99.3 kB] Get:4 http://raspbian.trivini.no/raspbian buster/main armhf libpython3.7-dev armhf 3.7.3-2+deb10u3 [47.2 MB] Get:7 http://raspbian.raspberrypi.org/raspbian buster/main armhf python3-dev armhf 3.7.3-1 [1,264 B] Get:5 http://raspbian.trivini.no/raspbian buster/main armhf libpython3-dev armhf 3.7.3-1 [20.1 kB] Get:6 http://raspbian.trivini.no/raspbian buster/main armhf python3.7-dev armhf 3.7.3-2+deb10u3 [513 kB] Fetched 48.0 MB in 5s (10.6 MB/s) Selecting previously unselected package python3-lib2to3. (Reading database ... 42609 files and directories currently installed.) Preparing to unpack .../0-python3-lib2to3_3.7.3-1_all.deb ... Unpacking python3-lib2to3 (3.7.3-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../1-python3-distutils_3.7.3-1_all.deb ... Unpacking python3-distutils (3.7.3-1) ... Selecting previously unselected package dh-python. Preparing to unpack .../2-dh-python_3.20190308_all.deb ... Unpacking dh-python (3.20190308) ... Selecting previously unselected package libpython3.7-dev:armhf. Preparing to unpack .../3-libpython3.7-dev_3.7.3-2+deb10u3_armhf.deb ... Unpacking libpython3.7-dev:armhf (3.7.3-2+deb10u3) ... Selecting previously unselected package libpython3-dev:armhf. Preparing to unpack .../4-libpython3-dev_3.7.3-1_armhf.deb ... Unpacking libpython3-dev:armhf (3.7.3-1) ... Selecting previously unselected package python3.7-dev. Preparing to unpack .../5-python3.7-dev_3.7.3-2+deb10u3_armhf.deb ... Unpacking python3.7-dev (3.7.3-2+deb10u3) ... Selecting previously unselected package python3-dev. Preparing to unpack .../6-python3-dev_3.7.3-1_armhf.deb ... Unpacking python3-dev (3.7.3-1) ... Setting up libpython3.7-dev:armhf (3.7.3-2+deb10u3) ... Setting up python3.7-dev (3.7.3-2+deb10u3) ... Setting up python3-lib2to3 (3.7.3-1) ... Setting up python3-distutils (3.7.3-1) ... Setting up dh-python (3.20190308) ... Setting up libpython3-dev:armhf (3.7.3-1) ... Setting up python3-dev (3.7.3-1) ... Processing triggers for man-db (2.8.5-2) ... Reading package lists... Done Building dependency tree Reading state information... Done The following additional packages will be installed: blt fontconfig-config fonts-lyx libblas3 libfontconfig1 libgfortran5 libimagequant0 libjbig0 libjs-jquery-ui liblapack3 liblcms2-2 libtcl8.6 libtiff5 libtk8.6 libwebp6 libwebpdemux2 libwebpmux3 libxft2 libxrender1 libxss1 python-backports.functools-lru-cache python-cycler python-dateutil python-kiwisolver python-matplotlib2-data python-numpy python-olefile python-pil python-pyparsing python-subprocess32 python-tk python-tz tk8.6-blt2.5 ttf-bitstream-vera x11-common Suggested packages: blt-demo libjs-jquery-ui-docs liblcms2-utils tcl8.6 tk8.6 python-cycler-doc dvipng ffmpeg gir1.2-gtk-3.0 ghostscript inkscape ipython librsvg2-common python-cairocffi python-configobj python-excelerator python-gobject-2 python-matplotlib2-doc python-nose python-qt4 python-scipy python-sip python-tornado python-traits python-wxgtk3.0 texlive-extra-utils texlive-latex-extra ttf-staypuft gfortran python-pytest python-numpy-dbg python-numpy-doc python-pil-doc python-pil-dbg python-pyparsing-doc tix python-tk-dbg The following NEW packages will be installed: blt fontconfig-config fonts-lyx libblas3 libfontconfig1 libgfortran5 libimagequant0 libjbig0 libjs-jquery-ui liblapack3 liblcms2-2 libtcl8.6 libtiff5 libtk8.6 libwebp6 libwebpdemux2 libwebpmux3 libxft2 libxrender1 libxss1 python-backports.functools-lru-cache python-cycler python-dateutil python-kiwisolver python-matplotlib python-matplotlib2-data python-numpy python-olefile python-pil python-pyparsing python-subprocess32 python-tk python-tz tk8.6-blt2.5 ttf-bitstream-vera x11-common 0 upgraded, 36 newly installed, 0 to remove and 0 not upgraded. Need to get 18.1 MB of archives. After this operation, 57.8 MB of additional disk space will be used. Get:1 http://raspbian.trivini.no/raspbian buster/main armhf libtcl8.6 armhf 8.6.9+dfsg-2 [878 kB] Get:2 http://raspbian.trivini.no/raspbian buster/main armhf ttf-bitstream-vera all 1.10-8 [352 kB] Get:3 http://raspbian.trivini.no/raspbian buster/main armhf fontconfig-config all 2.13.1-2 [280 kB] Get:4 http://raspbian.trivini.no/raspbian buster/main armhf libfontconfig1 armhf 2.13.1-2 [327 kB] Get:5 http://raspbian.trivini.no/raspbian buster/main armhf libxrender1 armhf 1:0.9.10-1 [29.9 kB] Get:6 http://raspbian.trivini.no/raspbian buster/main armhf libxft2 armhf 2.3.2-2 [49.3 kB] Get:7 http://raspbian.trivini.no/raspbian buster/main armhf x11-common all 1:7.7+19 [251 kB] Get:8 http://raspbian.trivini.no/raspbian buster/main armhf libxss1 armhf 1:1.2.3-1 [17.3 kB] Get:9 http://raspbian.trivini.no/raspbian buster/main armhf libtk8.6 armhf 8.6.9-2 [664 kB] Get:10 http://raspbian.trivini.no/raspbian buster/main armhf tk8.6-blt2.5 armhf 2.5.3+dfsg-4 [468 kB] Get:11 http://raspbian.trivini.no/raspbian buster/main armhf blt armhf 2.5.3+dfsg-4 [14.8 kB] Get:12 http://raspbian.trivini.no/raspbian buster/main armhf fonts-lyx all 2.3.2-1 [199 kB] Get:13 http://raspbian.trivini.no/raspbian buster/main armhf libgfortran5 armhf 8.3.0-6+rpi1 [206 kB] Get:14 http://raspbian.trivini.no/raspbian buster/main armhf libblas3 armhf 3.8.0-2 [103 kB] Get:15 http://raspbian.trivini.no/raspbian buster/main armhf libimagequant0 armhf 2.12.2-1.1 [27.2 kB] Get:16 http://raspbian.trivini.no/raspbian buster/main armhf libjbig0 armhf 2.1-3.1+b2 [27.6 kB] Get:17 http://raspbian.trivini.no/raspbian buster/main armhf libjs-jquery-ui all 1.12.1+dfsg-5 [232 kB] Get:18 http://raspbian.trivini.no/raspbian buster/main armhf liblapack3 armhf 3.8.0-2 [1,493 kB] Get:19 http://raspbian.trivini.no/raspbian buster/main armhf liblcms2-2 armhf 2.9-3 [116 kB] Get:20 http://raspbian.trivini.no/raspbian buster/main armhf libwebp6 armhf 0.6.1-2+deb10u1 [227 kB] Get:21 http://raspbian.trivini.no/raspbian buster/main armhf libtiff5 armhf 4.1.0+git191117-2~deb10u3 [250 kB] Get:22 http://raspbian.trivini.no/raspbian buster/main armhf libwebpdemux2 armhf 0.6.1-2+deb10u1 [86.7 kB] Get:23 http://raspbian.trivini.no/raspbian buster/main armhf libwebpmux3 armhf 0.6.1-2+deb10u1 [94.0 kB] Get:24 http://raspbian.trivini.no/raspbian buster/main armhf python-backports.functools-lru-cache all 1.5-3 [6,704 B] Get:25 http://raspbian.trivini.no/raspbian buster/main armhf python-cycler all 0.10.0-1 [7,448 B] Get:26 http://raspbian.trivini.no/raspbian buster/main armhf python-dateutil all 2.7.3-3 [76.8 kB] Get:27 http://raspbian.trivini.no/raspbian buster/main armhf python-kiwisolver armhf 1.0.1-2+b1 [54.0 kB] Get:28 http://raspbian.trivini.no/raspbian buster/main armhf python-matplotlib2-data all 2.2.3-6 [4,124 kB] Get:29 http://raspbian.trivini.no/raspbian buster/main armhf python-pyparsing all 2.2.0+dfsg1-2 [89.5 kB] Get:30 http://raspbian.trivini.no/raspbian buster/main armhf python-tz all 2019.1-1 [33.6 kB] Get:31 http://raspbian.trivini.no/raspbian buster/main armhf python-numpy armhf 1:1.16.2-1 [1,856 kB] Get:32 http://raspbian.trivini.no/raspbian buster/main armhf python-subprocess32 armhf 3.5.3-1 [28.9 kB] Get:33 http://raspbian.trivini.no/raspbian buster/main armhf python-matplotlib armhf 2.2.3-6 [5,006 kB] Get:34 http://raspbian.trivini.no/raspbian buster/main armhf python-olefile all 0.46-1 [35.9 kB] Get:35 http://raspbian.trivini.no/raspbian buster/main armhf python-pil armhf 5.4.1-2+deb10u3 [364 kB] Get:36 http://raspbian.trivini.no/raspbian buster/main armhf python-tk armhf 2.7.16-2 [23.8 kB] Fetched 18.1 MB in 7s (2,737 kB/s) Extracting templates from packages: 100% Preconfiguring packages ... Selecting previously unselected package libtcl8.6:armhf. (Reading database ... 42956 files and directories currently installed.) Preparing to unpack .../00-libtcl8.6_8.6.9+dfsg-2_armhf.deb ... Unpacking libtcl8.6:armhf (8.6.9+dfsg-2) ... Selecting previously unselected package ttf-bitstream-vera. Preparing to unpack .../01-ttf-bitstream-vera_1.10-8_all.deb ... Unpacking ttf-bitstream-vera (1.10-8) ... Selecting previously unselected package fontconfig-config. Preparing to unpack .../02-fontconfig-config_2.13.1-2_all.deb ... Unpacking fontconfig-config (2.13.1-2) ... Selecting previously unselected package libfontconfig1:armhf. Preparing to unpack .../03-libfontconfig1_2.13.1-2_armhf.deb ... Unpacking libfontconfig1:armhf (2.13.1-2) ... Selecting previously unselected package libxrender1:armhf. Preparing to unpack .../04-libxrender1_1%3a0.9.10-1_armhf.deb ... Unpacking libxrender1:armhf (1:0.9.10-1) ... Selecting previously unselected package libxft2:armhf. Preparing to unpack .../05-libxft2_2.3.2-2_armhf.deb ... Unpacking libxft2:armhf (2.3.2-2) ... Selecting previously unselected package x11-common. Preparing to unpack .../06-x11-common_1%3a7.7+19_all.deb ... Unpacking x11-common (1:7.7+19) ... Selecting previously unselected package libxss1:armhf. Preparing to unpack .../07-libxss1_1%3a1.2.3-1_armhf.deb ... Unpacking libxss1:armhf (1:1.2.3-1) ... Selecting previously unselected package libtk8.6:armhf. Preparing to unpack .../08-libtk8.6_8.6.9-2_armhf.deb ... Unpacking libtk8.6:armhf (8.6.9-2) ... Selecting previously unselected package tk8.6-blt2.5. Preparing to unpack .../09-tk8.6-blt2.5_2.5.3+dfsg-4_armhf.deb ... Unpacking tk8.6-blt2.5 (2.5.3+dfsg-4) ... Selecting previously unselected package blt. Preparing to unpack .../10-blt_2.5.3+dfsg-4_armhf.deb ... Unpacking blt (2.5.3+dfsg-4) ... Selecting previously unselected package fonts-lyx. Preparing to unpack .../11-fonts-lyx_2.3.2-1_all.deb ... Unpacking fonts-lyx (2.3.2-1) ... Selecting previously unselected package libgfortran5:armhf. Preparing to unpack .../12-libgfortran5_8.3.0-6+rpi1_armhf.deb ... Unpacking libgfortran5:armhf (8.3.0-6+rpi1) ... Selecting previously unselected package libblas3:armhf. Preparing to unpack .../13-libblas3_3.8.0-2_armhf.deb ... Unpacking libblas3:armhf (3.8.0-2) ... Selecting previously unselected package libimagequant0:armhf. Preparing to unpack .../14-libimagequant0_2.12.2-1.1_armhf.deb ... Unpacking libimagequant0:armhf (2.12.2-1.1) ... Selecting previously unselected package libjbig0:armhf. Preparing to unpack .../15-libjbig0_2.1-3.1+b2_armhf.deb ... Unpacking libjbig0:armhf (2.1-3.1+b2) ... Selecting previously unselected package libjs-jquery-ui. Preparing to unpack .../16-libjs-jquery-ui_1.12.1+dfsg-5_all.deb ... Unpacking libjs-jquery-ui (1.12.1+dfsg-5) ... Selecting previously unselected package liblapack3:armhf. Preparing to unpack .../17-liblapack3_3.8.0-2_armhf.deb ... Unpacking liblapack3:armhf (3.8.0-2) ... Selecting previously unselected package liblcms2-2:armhf. Preparing to unpack .../18-liblcms2-2_2.9-3_armhf.deb ... Unpacking liblcms2-2:armhf (2.9-3) ... Selecting previously unselected package libwebp6:armhf. Preparing to unpack .../19-libwebp6_0.6.1-2+deb10u1_armhf.deb ... Unpacking libwebp6:armhf (0.6.1-2+deb10u1) ... Selecting previously unselected package libtiff5:armhf. Preparing to unpack .../20-libtiff5_4.1.0+git191117-2~deb10u3_armhf.deb ... Unpacking libtiff5:armhf (4.1.0+git191117-2~deb10u3) ... Selecting previously unselected package libwebpdemux2:armhf. Preparing to unpack .../21-libwebpdemux2_0.6.1-2+deb10u1_armhf.deb ... Unpacking libwebpdemux2:armhf (0.6.1-2+deb10u1) ... Selecting previously unselected package libwebpmux3:armhf. Preparing to unpack .../22-libwebpmux3_0.6.1-2+deb10u1_armhf.deb ... Unpacking libwebpmux3:armhf (0.6.1-2+deb10u1) ... Selecting previously unselected package python-backports.functools-lru-cache. Preparing to unpack .../23-python-backports.functools-lru-cache_1.5-3_all.deb ... Unpacking python-backports.functools-lru-cache (1.5-3) ... Selecting previously unselected package python-cycler. Preparing to unpack .../24-python-cycler_0.10.0-1_all.deb ... Unpacking python-cycler (0.10.0-1) ... Selecting previously unselected package python-dateutil. Preparing to unpack .../25-python-dateutil_2.7.3-3_all.deb ... Unpacking python-dateutil (2.7.3-3) ... Selecting previously unselected package python-kiwisolver. Preparing to unpack .../26-python-kiwisolver_1.0.1-2+b1_armhf.deb ... Unpacking python-kiwisolver (1.0.1-2+b1) ... Selecting previously unselected package python-matplotlib2-data. Preparing to unpack .../27-python-matplotlib2-data_2.2.3-6_all.deb ... Unpacking python-matplotlib2-data (2.2.3-6) ... Selecting previously unselected package python-pyparsing. Preparing to unpack .../28-python-pyparsing_2.2.0+dfsg1-2_all.deb ... Unpacking python-pyparsing (2.2.0+dfsg1-2) ... Selecting previously unselected package python-tz. Preparing to unpack .../29-python-tz_2019.1-1_all.deb ... Unpacking python-tz (2019.1-1) ... Selecting previously unselected package python-numpy. Preparing to unpack .../30-python-numpy_1%3a1.16.2-1_armhf.deb ... Unpacking python-numpy (1:1.16.2-1) ... Selecting previously unselected package python-subprocess32. Preparing to unpack .../31-python-subprocess32_3.5.3-1_armhf.deb ... Unpacking python-subprocess32 (3.5.3-1) ... Selecting previously unselected package python-matplotlib. Preparing to unpack .../32-python-matplotlib_2.2.3-6_armhf.deb ... Unpacking python-matplotlib (2.2.3-6) ... Selecting previously unselected package python-olefile. Preparing to unpack .../33-python-olefile_0.46-1_all.deb ... Unpacking python-olefile (0.46-1) ... Selecting previously unselected package python-pil:armhf. Preparing to unpack .../34-python-pil_5.4.1-2+deb10u3_armhf.deb ... Unpacking python-pil:armhf (5.4.1-2+deb10u3) ... Selecting previously unselected package python-tk. Preparing to unpack .../35-python-tk_2.7.16-2_armhf.deb ... Unpacking python-tk (2.7.16-2) ... Setting up liblcms2-2:armhf (2.9-3) ... Setting up ttf-bitstream-vera (1.10-8) ... Setting up libxrender1:armhf (1:0.9.10-1) ... Setting up fontconfig-config (2.13.1-2) ... Setting up fonts-lyx (2.3.2-1) ... Setting up python-cycler (0.10.0-1) ... Setting up x11-common (1:7.7+19) ... update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults Setting up libjbig0:armhf (2.1-3.1+b2) ... Setting up python-pyparsing (2.2.0+dfsg1-2) ... Setting up python-dateutil (2.7.3-3) ... Setting up libjs-jquery-ui (1.12.1+dfsg-5) ... Setting up python-subprocess32 (3.5.3-1) ... Setting up libimagequant0:armhf (2.12.2-1.1) ... Setting up libtcl8.6:armhf (8.6.9+dfsg-2) ... Setting up libwebp6:armhf (0.6.1-2+deb10u1) ... Setting up python-backports.functools-lru-cache (1.5-3) ... Setting up libgfortran5:armhf (8.3.0-6+rpi1) ... Setting up python-tz (2019.1-1) ... Setting up python-matplotlib2-data (2.2.3-6) ... Setting up python-kiwisolver (1.0.1-2+b1) ... Setting up libtiff5:armhf (4.1.0+git191117-2~deb10u3) ... Setting up libxss1:armhf (1:1.2.3-1) ... Setting up libfontconfig1:armhf (2.13.1-2) ... Setting up libwebpmux3:armhf (0.6.1-2+deb10u1) ... Setting up python-olefile (0.46-1) ... Setting up libxft2:armhf (2.3.2-2) ... Setting up libwebpdemux2:armhf (0.6.1-2+deb10u1) ... Setting up libtk8.6:armhf (8.6.9-2) ... Setting up python-pil:armhf (5.4.1-2+deb10u3) ... Setting up libblas3:armhf (3.8.0-2) ... update-alternatives: using /usr/lib/arm-linux-gnueabihf/blas/libblas.so.3 to provide /usr/lib/arm-linux-gnueabihf/libblas.so.3 (libblas.so.3-arm-linux-gnueabihf) in auto mode Setting up tk8.6-blt2.5 (2.5.3+dfsg-4) ... Setting up liblapack3:armhf (3.8.0-2) ... update-alternatives: using /usr/lib/arm-linux-gnueabihf/lapack/liblapack.so.3 to provide /usr/lib/arm-linux-gnueabihf/liblapack.so.3 (liblapack.so.3-arm-linux-gnueabihf) in auto mode Setting up python-numpy (1:1.16.2-1) ... Setting up python-matplotlib (2.2.3-6) ... Setting up blt (2.5.3+dfsg-4) ... Setting up python-tk (2.7.16-2) ... Processing triggers for systemd (241-7~deb10u8+rpi1) ... Processing triggers for man-db (2.8.5-2) ... Processing triggers for libc-bin (2.28-10+rpt2+rpi1) ... Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Collecting minimalmodbus Downloading https://files.pythonhosted.org/packages/6c/d5/77d42e8a0b73da2b5f97acd91900ac50e303b4cb959f76350cfbb38e05a0/minimalmodbus-1.0.2-py2.py3-none-any.whl Collecting pyserial>=3.0 (from minimalmodbus) Downloading https://files.pythonhosted.org/packages/07/bc/587a445451b253b285629263eb51c2d8e9bcea4fc97826266d186f96f558/pyserial-3.5-py2.py3-none-any.whl (90kB) 100% |████████████████████████████████| 92kB 2.9MB/s Installing collected packages: pyserial, minimalmodbus Successfully installed minimalmodbus-1.0.2 pyserial-3.5 Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Collecting progressbar Downloading https://files.pythonhosted.org/packages/a3/a6/b8e451f6cff1c99b4747a2f7235aa904d2d49e8e1464e0b798272aa84358/progressbar-2.5.tar.gz Building wheels for collected packages: progressbar Running setup.py bdist_wheel for progressbar ... done Stored in directory: /root/.cache/pip/wheels/c0/e9/6b/ea01090205e285175842339aa3b491adeb4015206cda272ff0 Successfully built progressbar Installing collected packages: progressbar Successfully installed progressbar-2.5 Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Collecting requests Downloading https://files.pythonhosted.org/packages/2d/61/08076519c80041bc0ffa1a8af0cbd3bf3e2b62af10435d269a9d0f40564d/requests-2.27.1-py2.py3-none-any.whl (63kB) 100% |████████████████████████████████| 71kB 2.1MB/s Collecting urllib3<1.27,>=1.21.1 (from requests) Downloading https://files.pythonhosted.org/packages/4e/b8/f5a25b22e803f0578e668daa33ba3701bb37858ec80e08a150bd7d2cf1b1/urllib3-1.26.8-py2.py3-none-any.whl (138kB) 100% |████████████████████████████████| 143kB 2.2MB/s Collecting certifi>=2017.4.17 (from requests) Downloading https://files.pythonhosted.org/packages/37/45/946c02767aabb873146011e665728b680884cd8fe70dde973c640e45b775/certifi-2021.10.8-py2.py3-none-any.whl (149kB) 100% |████████████████████████████████| 153kB 2.1MB/s Collecting idna<3,>=2.5; python_version < "3" (from requests) Downloading https://files.pythonhosted.org/packages/a2/38/928ddce2273eaa564f6f50de919327bf3a00f091b5baba8dfa9460f3a8a8/idna-2.10-py2.py3-none-any.whl (58kB) 100% |████████████████████████████████| 61kB 3.0MB/s Collecting chardet<5,>=3.0.2; python_version < "3" (from requests) Downloading https://files.pythonhosted.org/packages/19/c7/fa589626997dd07bd87d9269342ccb74b1720384a4d739a1872bd84fbe68/chardet-4.0.0-py2.py3-none-any.whl (178kB) 100% |████████████████████████████████| 184kB 1.9MB/s Installing collected packages: urllib3, certifi, idna, chardet, requests Successfully installed certifi-2021.10.8 chardet-4.0.0 idna-2.10 requests-2.27.1 urllib3-1.26.8 Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Collecting pyModbusTCP Downloading https://files.pythonhosted.org/packages/54/c3/1875025210f06a8dc8cae69fc06761fb2fc407f03772651374fe45f08e08/pyModbusTCP-0.1.10.tar.gz Building wheels for collected packages: pyModbusTCP Running setup.py bdist_wheel for pyModbusTCP ... done Stored in directory: /root/.cache/pip/wheels/c0/aa/aa/997657331d5fcab9f84bfdb5a56dcbad0fedfc7e305f229f8b Successfully built pyModbusTCP Installing collected packages: pyModbusTCP Successfully installed pyModbusTCP-0.1.10 Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: setuptools in /usr/lib/python2.7/dist-packages (40.8.0) Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Collecting pyephem Downloading https://files.pythonhosted.org/packages/8e/02/1eade827452880961bc4657df24f72e7a76d764abff3e666433e1c8d1980/pyephem-9.99.tar.gz Collecting ephem (from pyephem) Downloading https://files.pythonhosted.org/packages/24/58/57f6bbe3d0c85c4321221c0442ec813b5c2a40e2445a29ff07f0f2f7df88/ephem-4.1.3.tar.gz (1.3MB) 100% |████████████████████████████████| 1.3MB 302kB/s Building wheels for collected packages: pyephem, ephem Running setup.py bdist_wheel for pyephem ... done Stored in directory: /root/.cache/pip/wheels/9d/c2/8d/c7117f6ac25cad94939c5dbbddbb4ba312e0b808edf11912a6 Running setup.py bdist_wheel for ephem ... done Stored in directory: /root/.cache/pip/wheels/18/15/58/604d1df7866161db32e6cd8bc2c8fdfce5da060d4d8154a6cf Successfully built pyephem ephem Installing collected packages: ephem, pyephem Successfully installed ephem-4.1.3 pyephem-9.99 Reading package lists... Done Building dependency tree Reading state information... Done The following additional packages will be installed: libevent-core-2.1-6 libevent-pthreads-2.1-6 libopts25 sntp Suggested packages: ntp-doc The following NEW packages will be installed: libevent-core-2.1-6 libevent-pthreads-2.1-6 libopts25 ntp sntp 0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded. Need to get 1,081 kB of archives. After this operation, 2,617 kB of additional disk space will be used. Get:1 http://raspbian.trivini.no/raspbian buster/main armhf libevent-core-2.1-6 armhf 2.1.8-stable-4 [117 kB] Get:2 http://raspbian.trivini.no/raspbian buster/main armhf libevent-pthreads-2.1-6 armhf 2.1.8-stable-4 [47.6 kB] Get:3 http://raspbian.trivini.no/raspbian buster/main armhf libopts25 armhf 1:5.18.12-4 [61.1 kB] Get:4 http://raspbian.trivini.no/raspbian buster/main armhf ntp armhf 1:4.2.8p12+dfsg-4 [695 kB] Get:5 http://raspbian.trivini.no/raspbian buster/main armhf sntp armhf 1:4.2.8p12+dfsg-4 [161 kB] Fetched 1,081 kB in 1s (1,181 kB/s) Selecting previously unselected package libevent-core-2.1-6:armhf. (Reading database ... 45244 files and directories currently installed.) Preparing to unpack .../libevent-core-2.1-6_2.1.8-stable-4_armhf.deb ... Unpacking libevent-core-2.1-6:armhf (2.1.8-stable-4) ... Selecting previously unselected package libevent-pthreads-2.1-6:armhf. Preparing to unpack .../libevent-pthreads-2.1-6_2.1.8-stable-4_armhf.deb ... Unpacking libevent-pthreads-2.1-6:armhf (2.1.8-stable-4) ... Selecting previously unselected package libopts25:armhf. Preparing to unpack .../libopts25_1%3a5.18.12-4_armhf.deb ... Unpacking libopts25:armhf (1:5.18.12-4) ... Selecting previously unselected package ntp. Preparing to unpack .../ntp_1%3a4.2.8p12+dfsg-4_armhf.deb ... Unpacking ntp (1:4.2.8p12+dfsg-4) ... Selecting previously unselected package sntp. Preparing to unpack .../sntp_1%3a4.2.8p12+dfsg-4_armhf.deb ... Unpacking sntp (1:4.2.8p12+dfsg-4) ... Setting up libopts25:armhf (1:5.18.12-4) ... Setting up ntp (1:4.2.8p12+dfsg-4) ... Created symlink /etc/systemd/system/multi-user.target.wants/ntp.service → /lib/systemd/system/ntp.service. Setting up libevent-core-2.1-6:armhf (2.1.8-stable-4) ... Setting up libevent-pthreads-2.1-6:armhf (2.1.8-stable-4) ... Setting up sntp (1:4.2.8p12+dfsg-4) ... Processing triggers for systemd (241-7~deb10u8+rpi1) ... Processing triggers for man-db (2.8.5-2) ... Processing triggers for libc-bin (2.28-10+rpt2+rpi1) ... Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Enabling uart Setting up Ram drive setup autostart for airiana.service Created symlink /etc/systemd/system/multi-user.target.wants/airiana.service → /etc/systemd/system/airiana.service. setup autostart for controller.service Created symlink /etc/systemd/system/multi-user.target.wants/controller.service → /etc/systemd/system/controller.service. adding boot cmdline config Copy hosts file Touch data.log setup symlinkts between RAM and ./public ln: failed to create symbolic link 'out.txt': File exists ln: failed to create symbolic link 'history.png': File exists chown: cannot access '../RAM/': No such file or directory chown: cannot access '../RAM/*': No such file or directory setup auto update from airiana repo. no crontab for pi Installation completed, reboot in 15 sec