search

BearDooks / Ender3Pro_Firmware

Custom firmware for the Ender 3 Pro with BTT SKR Mini e3 v3.0, BLTouch, and Sprite Extruder Pro
GNU General Public License v3.0
11 stars 3 forks source link

modifications #1

Open im420Mikey420 opened 3 months ago

im420Mikey420 commented 3 months ago

i dont know if you will even see this im not an expert on github but i was wondering if you could make some size adjustments on this firmware for me as i have the ender extender on my ender 3 pro with the sprite hot end and bl touch

BearDooks commented 3 months ago

Do you also have the BTT SKR Mini e3 v3.0 board installed? This firmware is specifically for that board.

Chuck

im420Mikey420 commented 3 months ago

Yes I do it’s just my ender is not stock anymore it now has a 400x400x500 print area Sent from my iPhone

On Jul 27, 2024, at 6:47 PM, Chuck @.***> wrote:



Do you also have the BTT SKR Mini e3 v3.0 board installed? This firmware is specifically for that board.

Chuck

— Reply to this email directly, view it on GitHubhttps://github.com/BearDooks/Ender3Pro_Firmware/issues/1#issuecomment-2254284261, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BAWYDVOX6LLBQQA435UH4SDZOQWPZAVCNFSM6AAAAABLSG64L2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENJUGI4DIMRWGE. You are receiving this because you authored the thread.Message ID: @.***>

BearDooks commented 3 months ago

OK. I am at work now, but I will try to get to this tonight and see if I can make something for you.

Chuck

im420Mikey420 commented 3 months ago

Ok thank you so Much Sent from my iPhone

On Jul 29, 2024, at 11:15 AM, Chuck @.***> wrote:



OK. I am at work now, but I will try to get to this tonight and see if I can make something for you.

Chuck

— Reply to this email directly, view it on GitHubhttps://github.com/BearDooks/Ender3Pro_Firmware/issues/1#issuecomment-2256356765, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BAWYDVMJ3LTGQOYRY4357ADZOZTCJAVCNFSM6AAAAABLSG64L2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENJWGM2TMNZWGU. You are receiving this because you authored the thread.Message ID: @.***>

BearDooks commented 3 months ago

OK. I made some changes and compiled the new firmware. You can find it here

https://github.com/BearDooks/Ender3Pro_Firmware/tree/main/Precompiled%20Firmware/firmware_with_extender

or here

https://github.com/BearDooks/Ender3Pro_Firmware/releases/tag/v2.0e

All I did was change the X and Y limits to 400 and the Z limit to 500, which should give you the 400x400x500 print bed size. Please note that since I don't have that extender, or even this printer anymore, I can't test this firmware, so you need to use it at your own risk.

Chuck

im420Mikey420 commented 3 months ago

If it’s same firmware just with the print size change it should be ok I would think Sent from my iPhone

On Jul 29, 2024, at 7:23 PM, Chuck @.***> wrote:



OK. I made some changes and compiled the new firmware. You can find it here

https://github.com/BearDooks/Ender3Pro_Firmware/tree/main/Precompiled%20Firmware/firmware_with_extender

or here

https://github.com/BearDooks/Ender3Pro_Firmware/releases/tag/v2.0e

All I did was change the X and Y limits to 400 and the Z limit to 500, which should give you the 400x400x500 print bed size. Please note that since I don't have that extender, or even this printer anymore, I can't test this firmware, so you need to use it at your own risk.

Chuck

— Reply to this email directly, view it on GitHubhttps://github.com/BearDooks/Ender3Pro_Firmware/issues/1#issuecomment-2257235825, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BAWYDVLCQZV3HZC456C4PMLZO3MGVAVCNFSM6AAAAABLSG64L2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENJXGIZTKOBSGU. You are receiving this because you authored the thread.Message ID: @.***>

BearDooks commented 3 months ago

It should be. Just let me know if it works

Chuck

im420Mikey420 commented 3 months ago

Will do I’ll pop it in tomorrow morning Sent from my iPhone

On Jul 29, 2024, at 7:58 PM, Chuck @.***> wrote:



It should be. Just let me know if it works

Chuck

— Reply to this email directly, view it on GitHubhttps://github.com/BearDooks/Ender3Pro_Firmware/issues/1#issuecomment-2257262677, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BAWYDVJMQBM7JYK3XRFZ353ZO3QJNAVCNFSM6AAAAABLSG64L2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENJXGI3DENRXG4. You are receiving this because you authored the thread.Message ID: @.***>

im420Mikey420 commented 3 months ago

It loaded just fine and everything worked but when I was heating up the bed to do the offset and to lvl it it restarted itself after it hit 70+ Sent from my iPhone

On Jul 29, 2024, at 9:46 PM, Michael Schindler @.***> wrote:

 Will do I’ll pop it in tomorrow morning Sent from my iPhone

On Jul 29, 2024, at 7:58 PM, Chuck @.***> wrote:



It should be. Just let me know if it works

Chuck

— Reply to this email directly, view it on GitHubhttps://github.com/BearDooks/Ender3Pro_Firmware/issues/1#issuecomment-2257262677, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BAWYDVJMQBM7JYK3XRFZ353ZO3QJNAVCNFSM6AAAAABLSG64L2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENJXGI3DENRXG4. You are receiving this because you authored the thread.Message ID: @.***>

BearDooks commented 3 months ago

I'm sorry, I don't understand. The printer restarted when the bed temp went above 70?

im420Mikey420 commented 3 months ago

Yes but with previous firmware I had installed back on it heats up just fine Sent from my iPhone

On Jul 31, 2024, at 9:28 AM, Chuck @.***> wrote:



I'm sorry, I don't understand. The printer restarted when the bed temp went above 70?

— Reply to this email directly, view it on GitHubhttps://github.com/BearDooks/Ender3Pro_Firmware/issues/1#issuecomment-2260658644, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BAWYDVL52NQYFMPLQUHIKI3ZPDYB5AVCNFSM6AAAAABLSG64L2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENRQGY2TQNRUGQ. You are receiving this because you authored the thread.Message ID: @.***>

BearDooks commented 3 months ago

I just checked the config and the max bed temp is set to 125 with an overshoot of 10, so i don't think that could be the issue. Online a few people said to make sure the power switch on the PSU is set to the correct voltage. As I am unsure where you live, in the US some people had noticed it was set for 230 rather than 115 and it would short out

im420Mikey420 commented 3 months ago

It’s set right Iv been using the printer for 3 years now I’ll try again and see if it was just a fluke thing Sent from my iPhone

On Jul 31, 2024, at 10:12 AM, Chuck @.***> wrote:



I just checked the config and the max bed temp is set to 125 with an overshoot of 10, so i don't think that could be the issue. Online a few people said to make sure the power switch on the PSU is set to the correct voltage. As I am unsure where you live, in the US some people had noticed it was set for 230 rather than 115 and it would short out

— Reply to this email directly, view it on GitHubhttps://github.com/BearDooks/Ender3Pro_Firmware/issues/1#issuecomment-2260758811, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BAWYDVNBKYMHW6WIDPQ3JM3ZPD5EFAVCNFSM6AAAAABLSG64L2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENRQG42TQOBRGE. You are receiving this because you authored the thread.Message ID: @.***>

BearDooks commented 2 months ago

Just checking in to see if this is still an issue?