search

BelaPlatform / bela-hardware

Bela cape and capelets
25 stars 19 forks source link

Provide ground on J10 #2

Closed giuliomoro closed 7 years ago

giuliomoro commented 7 years ago

Two pads on J10 are currently nc but could conveniently be connected to ground.

apmcpherson commented 7 years ago

I left those NC because on J9, they are connected to the minus output of the left and right line outputs (which are otherwise unused on the current design). If someone cuts the traces to install an effect loop, I at least didn't want there to be any harm in connecting all four pads across. If having ground there is useful, perhaps it would be better to add another pad so it is unambiguous.