Open FallingSnow opened 11 months ago
You can't edit the CODE region as it is in ROM, I will email you something to try.
Got your email. I'll test it tomorrow.
It did work! Thank you! It took some messing around with to get it working. I finally took the edid from your edid_change.bin
and slightly modified it and it took.
Since this exists in CODE I'm assuming it is not possible to change the edid without flashing the EEPROM and resetting the device?
Hello,
No, it is possible to do it at runtime as well, but I wanted to try a simple method first. I will try to document it some time in the future.
Sincerely, Bertold
Op wo 25 okt. 2023 22:14 schreef Ayrton Sparling @.***>:
It did work! Thank you! It took some messing around with to get it working. I finally took the edid from your edid_change.bin and slightly modified it and it took.
Since this exists in CODE I'm assuming it is not possible to change the edid without flashing the EEPROM and resetting the device?
— Reply to this email directly, view it on GitHub https://github.com/BertoldVdb/ms-tools/issues/13#issuecomment-1779986210, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABQILGOYBB2AOSW2ZNBYGATYBFXL5AVCNFSM6AAAAAA5ALSIP2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTONZZHE4DMMRRGA . You are receiving this because you commented.Message ID: @.***>
Awesome, thank you for taking the time to work on this Bertold!
您不能像在 ROM 中那样编辑 CODE 区域,我会通过电子邮件发送给您一些尝试。
Send me a thank you 1248429482@qq.com
I decided to create this issue to keep from spamming #10.
The only place I was able to find the EDID was in the CODE region. RAM and EEPROM did not seem to contain the EDID.
The following returns the edid on an MS2109.
Trying to write an EDID to it however returns the following:
I assume this is because it's the CODE region and cannot be written to.
Am I just not looking at the RAM region the right way to find the EDID in it?