Closed markakash closed 7 months ago
Have you tried to add "agdpmod=pikera" to boot-args?
How are you, look, I have an extremely stable EFI, the Slepp and Wakeup works perfectly, but when you use the Sleep about 5 or 8 times, the computer hangs or reset EFI.zip
Maybe you can check the EFI and serve you, since I see that you do not work the Slepp and Wakeup
Are you running Big Sur? That's the only version, I've found with the help of VoodooTSCsync.text, that sleep can work (most of the time).
Yes I am running Big Sur I dint now if works on newer systems Do you test in Sonoma, Ventura or Monterey ? Do you now if is possible run Sonoma, Ventura or Monterey with E5-V3 or need V4 CPUs ?
Try my latest EFI release. It supports Sonoma.
Closed this issue assuming the OP has resolved the issue already.
Hey, I was using your EFI on my Dell T7810 with Dual Xeon E5-2680v3 and 64gb 2100 MHz ram. I recently upgraded to Dual Xeon E5-2680v4 and 128gb 2400MHz ram. When I try to boot into the installer, after the whole verbose logs/message passing on the screen I get black screen. The PC is still up and running but I don't see the installer or any other error messages. I tried HDMI and Display Port both resulted in same result. I updated the Cpuid1Data to incorporate for v4 CPU and also did the BIOS trick you mentioned. Do you have any other ideas what might be causing it? I m using AMD Radeon RX 6600XT which is officially supported in MacOS.
I have attached OpenCore logs below
Any help is appreciated. :))
opencore-2023-05-06-111043.txt