search

BitMaker-hub / NerdMiner_v2

Improved version of first ESP32 NerdMiner
Other
1.37k stars 249 forks source link

NerdMiner runs out of KH/s #331

Open ricardonegrao opened 4 months ago

ricardonegrao commented 4 months ago

This problem is occurring and I have already reset the equipment several times.

Has anyone ever experienced this?

Is there a solution?

IMG_3111

19201003080114 commented 4 months ago

Either wrong settings, or you try to connect to 5G wifi. Nerdminer only works on 2.4G WiFi.

ricardonegrao commented 4 months ago

I am using 2G.

How would you know what is happening with this equipment?

19201003080114 commented 4 months ago

Reset it and check your pool and port settings

ricardonegrao commented 4 months ago

This is my pool configuration:

Pool url pool.vkbit.com Pool port 3333 -3

19201003080114 commented 4 months ago

Try resetting your wifi router. also check your wifi settings

ricardonegrao commented 4 months ago

I found the problem:

It was my BTC wallet address!

Thank you for your help.

DanielErnany commented 4 months ago

I found the problem:

It was my BTC wallet address!

Thank you for your help.

What was wrong with her? and how did you fix it? I have the same problem

v1per4llbl4ck commented 4 months ago

me the same i dont know how to change btc address. with sdcard dont work. i take my address from crypto.com in receve mode

19201003080114 commented 4 months ago

me the same i dont know how to change btc address. with sdcard dont work. i take my address from crypto.com in receve mode

Boot to Wifi Manger and you can change the btc address

19201003080114 commented 4 months ago

I found the problem: It was my BTC wallet address! Thank you for your help.

What was wrong with her? and how did you fix it? I have the same problem

Boot to Wifi Manger and you can change the btc address

MARK345456 commented 3 months ago

ALGUEM SABE COMO REINICIAR O NERDMINER

dwightmulcahy commented 3 months ago

If you see your Nerdminer go to 0.00kH/s a lot, it could be the cable or power source you are using. I noticed that it bounces between 78kH/s and 0.00kH/s when I have it hooked up to my laptop, but when I plug it into a 1 amp or better power supply, it stays at the 78kH/s-ish mining all the time.

ricardonegrao commented 3 months ago

https://flasher.bitronics.store/

Em qui., 7 de mar. de 2024 às 16:20, MARK345456 @.***> escreveu:

ALGUEM SABE COMO REINICIAR O NERDMINER

— Reply to this email directly, view it on GitHub https://github.com/BitMaker-hub/NerdMiner_v2/issues/331#issuecomment-1984259183, or unsubscribe https://github.com/notifications/unsubscribe-auth/AJTIS2OTWQZDGDCV2OYSK6TYXC4YFAVCNFSM6AAAAABDU7NYKWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBUGI2TSMJYGM . You are receiving this because you authored the thread.Message ID: @.***>

IT-Cru commented 3 months ago

From comments I would say this issue could be closed, because @ricardonegrao fixed his issue after updating to his working BTC wallet address.

ben6608 commented 3 months ago

I also have the same problem. I updated the BTC wallet address and it didn't improve. I also changed the pool and reset the flash machine, but it didn't work.

dwightmulcahy commented 3 months ago

Have you tried a different power supply and cable to eliminate that?

ben6608 commented 3 months ago

Yes, I tried changing the power supply and cables, but it didn’t work.

19201003080114 commented 3 months ago

Yes, I tried changing the power supply and cables, but it didn’t work.

Check your settings: