Blacktempel / open-hardware-monitor

Automatically exported from code.google.com/p/open-hardware-monitor
0 stars 0 forks source link

No Fan Information / Limited Voltages #58

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago
I am not seeing any fan speeds.

Also, I am only seeing CPU VCore and Battery voltages from my motherboard. No 
information about the +/-12v, +/-5v, RAM, etc.

Using version 0.1.34.0 Beta on Windows 7 Ultimate x64.

Original issue reported on code.google.com by jimbo11...@gmail.com on 12 May 2010 at 2:50

Attachments:

GoogleCodeExporter commented 9 years ago
Do you have any running fans connected at least with three wires to your 
mainboard?
Otherwise it is not possible to detect the fans.

Only the voltages connected the same way on all mainboards are currently 
displayed.
The other voltages are usually mainboard specific, and without mainboard 
specific
settings, they can't be displayed reliably. This will change once Issue 53 is
implemented. Then I can just add all voltage sensors (those with wrong scaling
factors as well) and configure them as hidden by default, so that the user can 
then
decide what to use.

Original comment by moel.mich on 12 May 2010 at 6:27

GoogleCodeExporter commented 9 years ago
Yes, all my fans connected directly to the motherboard have three wires.

Original comment by jimbo11...@gmail.com on 12 May 2010 at 12:30

GoogleCodeExporter commented 9 years ago
Do any other monitoring programs (like CPUID HWMonitor or EasyTune6 from 
Gigabyte)
show the fan speeds? Could you create a report with the CPUID HWMonitor (File / 
Save
monitoring data)?

Original comment by moel.mich on 12 May 2010 at 1:04

GoogleCodeExporter commented 9 years ago
After a full shutdown, and boot up, it seems that all 3 of my fans are being 
shown now. 
There must of been some kind of problem in testing out all the different HW 
monitoring 
apps, and forcing a few to shutdown.

Original comment by jimbo11...@gmail.com on 13 May 2010 at 12:06

GoogleCodeExporter commented 9 years ago
Ok, thanks for reporting back. I am not sure how exactly other monitoring 
software
could cause this problem. But as it is working for now, and this case seems not 
to be
very important, I will close this issue. If the problem shows up again, just 
post
once more, and I will reopen it.

Original comment by moel.mich on 13 May 2010 at 10:13