systemofapwne
commented
6 years ago I guess my measurement of the time it takes to write must be flawed. Actually, the writing speed looks fine now since I'm plotting now for around 16-18 hours and yet I'm only around ~ 70% on my 6 TB drive, which rather reflects the ~ 65 MB/s
According to xplotter 1.1, my write speed is 65 MB/s. Yet writing 6 GB of previously plotted RAM to my HDD only takes ~51 seconds, which means, it's rather ~120 MB/s. Maybe some factor of two error in the calculations? I also checked if the plotted RAM is incorrect, so I also stopped the time there: 26 seconds @ 28kN/min with 512 kByte/nonce equals 5.9 GByte. So all looks ok on this end.