Closed graytron closed 6 years ago
Is the evtest output from the cloned device? If so, could you add the output from the machine it is physically connected to? I expect some data listed under Properties
, if that's the case then that might be what's missing.
That's an interesting amount of key codes for a mouse btw ;-)
(And also a model I've been considering getting myself, so one more reason to get this working ;-) )
Earlier evtest output was from the cloned device on Raspberry Pi 3B.
Output of sudo evtest /dev/input/by-id/usb-ROCCAT_ROCCAT_Kone_XTD_Optical-event-mouse
from the local machine that the mouse is physically connected to is in evtest-local.txt
Event code parameters are almost exactly identical apart from this minor difference:
Event type 3 (EV_ABS)
Event code 32 (ABS_VOLUME)
Value 0
Min 0
- Max 572
+ Max 0
The physical device has Max value of 572, while the cloned device has Max value of 0.
No properties are listed on either machine.
ETPS/2 Elantech Touchpad
of my old Debian jessie i386 laptop seem to have this same problem: device is grabbed, but there is no mouse movement on remote side.
This is an embarrassing one... and a weird one given that today when I was trying to re-reproduce this with my touchpad it worked... though that might have something to do with cloning it to the same machine it's already on - maybe libinput cached some info there or something...
I'm trying to share a local ROCCAT Kone XTD USB mouse with a remote computer. The mouse is grabbed when hotkey is pressed, but there is no mouse movement on the remote side (Xorg).
Following setup is used:
Configuration file
/etc/netevent/pi3-wlan.conf
on local is following:When I run the command below:
... there are no errors output and everything seems to work fine, except that the mouse pointer does not move on remote Xorg.
evtest
on remote listsROCCAT ROCCAT Kone XTD Optical
mouse and prints mouse events as the mouse is moved. See evtest.txt as an example output.Sharing another simpler USB mouse (Logitech MX518) on the same local system works just fine, so the problem seems to be related to ROCCAT Kone XTD mouse or its features. Detaching and reattaching ROCCAT mouse and restarting netevent made no difference.
Please let me know if there is anything I can do to help resolving this issue.