romeczek73
commented
3 weeks ago I debugged .ini by myself but still K2000 won't boot
Platform: BlueSCSI FW Version: 2024.05.21-rel May 21 2024 21:21:44 I2C Supported Flash chip size: 2048 kB
=== SD Card Info === SD card detected, FAT32 volume size: 15185 MB SD Name: SL16G, MID: 0x03, OID: 0x53 0x44
=== Global Config === Reading configuration from bluescsi.ini Active configuration:
=== Finding images in / === == Opening /HD10_512 1000 MB.hda for ID: 1 LUN: 0 ---- Image ready
=== ROM Drive === Platform supports ROM drive up to 1692 kB ---- ROM drive image not detected
=== Configured SCSI Devices ===
- ID: 1, BlockSize: 512, Type: Fixed, Quirks: None, Size: 1024064kB
Initialization complete!
My Kurzweil K2000R does not boot with BlueSCSI v2 connected. Tested with termination on and off. Please help...
Platform: BlueSCSI FW Version: 2024.05.21-rel May 21 2024 21:21:44 I2C Supported Flash chip size: 2048 kB
=== SD Card Info === SD card detected, FAT32 volume size: 3772 MB SD Name: SD04G, MID: 0x02, OID: 0x54 0x4D [150ms]
[150ms] === Global Config === [151ms] Reading configuration from bluescsi.ini [151ms] Active configuration: [151ms] -- Debug is enabled [151ms] DBG -- Parity is enabled [151ms] DBG -- ReinsertCDOnInquiry is disabled [192ms]
[192ms] === Finding images in / === [194ms] == Opening /HD10_512 1000 MB.hda for ID: 1 LUN: 0 [409ms] DBG ---- Read prefetch enabled: 8192 bytes [409ms] ---- Image ready [409ms] [409ms] === ROM Drive === [409ms] Platform supports ROM drive up to 1692 kB [409ms] ---- ROM drive image not detected [409ms]
[409ms] === Configured SCSI Devices === [409ms] * ID: 1, BlockSize: 512, Type: Fixed, Quirks: None, Size: 1024064kB [511ms]
[511ms] Initialization complete! [705ms] INFO: Pico Voltage: 3.217V. [707ms] DBG -- BUS_BUSY