search

Blueforcer / awtrix3

Custom firmware for the Ulanzi Smart Pixel clock or self made awtrix. Getting started is easy as 1-2-3
https://blueforcer.github.io/awtrix3/
Other
1.41k stars 112 forks source link

[BUG] Matrix not lighting up after update to 0.66 #148

Closed cebrac closed 1 year ago

cebrac commented 1 year ago

I upgraded from 0.62 to 0.66 firmware via web interface upload button. Matrix was showing time at that point. Web interface said device rebooting but matrix did not show the usual indications of a reboot. Time display remained. Didn't check whether time was correct, did not pay attention to it.

After reboot, device became accessible through MQTT and web interface but matrix remained displaying "a" time. Tried two button reboot, now the matrix stays dark.

Device boots, beep can be heard. Seems like just the matrix isn't initialized properly. Will let battery run dry so there is a proper "cold" restart and then report further.

To Reproduce

Unclear whether this can be forced. If this is likely to be a hardware issue, this ticket can be closed.

Expected behavior

Matrix lighting up and displaying version number, as well as other contents upon reboot.

Blueforcer commented 1 year ago

Do you use IObroker?

cebrac commented 1 year ago

No I drive the clock via MQTT from a bunch of scripts on a different software platform