mhoogenbosch commented 1 year ago

Bug report

Describe the bug

Yesterday I updated my 0.70 fw to the latest 0.71 with upgraded FW. After a succesfull upgrade everything seemed fine. Inside HA and MQTT everything was working. When seeing the device the 'date' screen was stuck. I saw the various app cycling through but the screen stayed on date. I decided to turn off the device by holding the two buttons and turning it on again. Now the screen is black.

I coud reach it through LAN, but the screen stays black / turned off.

Additional information

I decided to install the latest FW through the online flasher. I can hear the high tone and after a while the flash is finished. But the screen stays black.

To Reproduce

Steps to reproduce the behavior:

Don't know

Expected behavior

Screen to turn on

Screenshots

If applicable, add screenshots to help explain your problem.

Logs

After flashing the console logs:

[ 13264][E][vfs_api.cpp:105] open(): /littlefs/config.json does not exist, no permits for creation
[13266] [loadSettings]: Webserver configuration file not exist
[13277] [setMatrixLayout]: Set matrix layout to 0
Framebuffer_GFX::begin Width: 32 Height: 8 Num Pixels: 256
[ 14581][E][WiFiSTA.cpp:317] begin(): connect failed! 0x300a

AP mode.
Server IP address: 192.168.4.1

[14582] [setup]: My IP: 192.168.4.1
[ 19827][E][vfs_api.cpp:105] open(): /littlefs/alarms.json does not exist, no permits for creation
[ 29828][E][vfs_api.cpp:105] open(): /littlefs/alarms.json does not exist, no permits for creation
[ 39833][E][vfs_api.cpp:105] open(): /littlefs/alarms.json does not exist, no permits for creation
[ 49840][E][vfs_api.cpp:105] open(): /littlefs/alarms.json does not exist, no permits for creation
[ 59844][E][vfs_api.cpp:105] open(): /littlefs/alarms.json does not exist, no permits for creation
[ 69844][E][vfs_api.cpp:105] open(): /littlefs/alarms.json does not exist, no permits for creation
[ 79844][E][vfs_api.cpp:105] open(): /littlefs/alarms.json does not exist, no permits for creation
[ 89847][E][vfs_api.cpp:105] open(): /littlefs/alarms.json does not exist, no permits for creation
[ 99851][E][vfs_api.cpp:105] open(): /littlefs/alarms.json does not exist, no permits for creation
[109855][E][vfs_api.cpp:105] open(): /littlefs/alarms.json does not exist, no permits for creation
[119857][E][vfs_api.cpp:105] open(): /littlefs/alarms.json does not exist, no permits for creation

Additional context

Add any other context about the problem here.

Blueforcer commented 1 year ago

Seems like you flashed the wrong firmware. If you using the Ulanzi clock, flash the ulanzi firmware.. not awtrix2_upgrade