HW: ClockTHREE Final Board changes

GoogleCodeExporter commented 9 years ago

List out all HW changes required in C2 board for C3 final

1. Invert Power In socket

2. Bigger LED Holes (0.75mm DIAMETER). Stagger in a zig-zag manner ot get more 
clearance

3. ROW Drivers STP16DP06 : Add DIP socket on Main Board, and remove the SMD 
option on Main Board

4. Break Out Board for Row Driver with SMD chip STP16DP05 AND Potentiometer and 
Capacitor

5. rtcBoB : New layout, with only DS3231 SMD chip (no through hole RTC chip) 
due to battery on other side. Select correct BATTERY HOLDER

Original issue reported on code.google.com by anoo...@gmail.com on 11 Dec 2010 at 1:38

GoogleCodeExporter commented 9 years ago

[deleted comment]

GoogleCodeExporter commented 9 years ago

6. Column Driver ENABLE Pins 19 and 18

7. ATMega I/O Pins re-allocate

Original comment by anoo...@gmail.com on 11 Dec 2010 at 1:40

GoogleCodeExporter commented 9 years ago

Closed on TJS final review

Original comment by wyojus...@gmail.com on 5 Jan 2011 at 12:41

Changed state: Fixed

BobbyMi / clockthree

HW: ClockTHREE Final Board changes #10