search

Bodmer / TFT_eSPI

Arduino and PlatformIO IDE compatible TFT library optimised for the Raspberry Pi Pico (RP2040), STM32, ESP8266 and ESP32 that supports different driver chips
Other
3.68k stars 1.06k forks source link

User config for 1.77' TFT 160(RGB)x128 board #1358

Closed dirkx closed 2 years ago

dirkx commented 2 years ago 
// Config for the blue boards:
// front: 1.77' TFT 160(RGB)x128
// back:  1.77' TFT and two rows of pins; 8..1 and 9..11
//
// https://www.arthurwiz.com/software-development/177-inch-tft-lcd-display-with-st7735s-on-arduino-mega-2560
// https://www.hackster.io/ocnarf/cheap-1-77-inch-tft-screen-on-esp32-ebe208

#define ST7735_DRIVER     

#define TFT_WIDTH  128
#define TFT_HEIGHT 160

#define ST7735_BLACKTAB
#define TFT_RGB_ORDER TFT_RGB  
#define TFT_INVERSION_OFF

#define TFT_MISO -1  // not broken out on this board.
#define TFT_SCLK 17  // TX2
#define TFT_MOSI 16  // RX2
#define TFT_RST   4  // D4
#define TFT_DC    2  // D2
#define TFT_CS   15  //D15
                     // requires pin 8 (LED ANODE) to be wired to 3V3 or a digital out.

#define TFT_BACKLIGHT_ON HIGH 

#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts

#define SMOOTH_FONT

#define SPI_FREQUENCY  27000000
#define SPI_READ_FREQUENCY  20000000
#define SPI_TOUCH_FREQUENCY  2500000
#endif
Bodmer commented 2 years ago

Thanks, can you provide a clickable link to the display vendors page.

Maybe it is this one????

dirkx commented 2 years ago

The blue one of https://nl.aliexpress.com/item/32265119437.html https://nl.aliexpress.com/item/32265119437.html is indeed correct.

Confirmed/tested is https://www.amazon.nl/dp/B07TJGF8HS/ref=twister_B084257CK2 https://www.amazon.nl/dp/B07TJGF8HS/ref=twister_B084257CK2 as well as https://nl.aliexpress.com/item/32818069069.html https://nl.aliexpress.com/item/32818069069.html

With kind regards, in addition to what the TFT_eSPI library offers - tft.writecommand(onoff ? ST7735_DISPON : ST7735_DISPOFF); on/off for screen saving / preventing burn in also works.