Open ninp0 opened 2 years ago
Unfortunately https://github.com/BondtechAB/Bondtech_Prusa_i3/blob/master/Firmware/3.11.0/FW3110-Build5475-Bondtech-MK3S-16-EINSy10a-SliceE_HT-Mosquito.zip only supports the PT100.
I'm able to do get the PT1000 to work when building https://github.com/BondtechAB/Bondtech-Prusa-Firmware . The only downside to that solution is getting the build to properly support PINDA XYZ calibration and the 3:1 extrusion ratio.
Please advise on how to build the firmware from https://github.com/BondtechAB/Bondtech-Prusa-Firmware to include valid PINDA XYZ calibration, 3:1 extrusion ration, and PT1000 support
and/or
provide a hex firmware image in this repo supporting the aforementioned items. Thanks.
Unfortunately https://github.com/BondtechAB/Bondtech_Prusa_i3/blob/master/Firmware/3.11.0/FW3110-Build5475-Bondtech-MK3S-16-EINSy10a-SliceE_HT-Mosquito.zip only supports the PT100.
I'm able to do get the PT1000 to work when building https://github.com/BondtechAB/Bondtech-Prusa-Firmware . The only downside to that solution is getting the build to properly support PINDA XYZ calibration and the 3:1 extrusion ratio.
Please advise on how to build the firmware from https://github.com/BondtechAB/Bondtech-Prusa-Firmware to include valid PINDA XYZ calibration, 3:1 extrusion ration, and PT1000 support
and/or
provide a hex firmware image in this repo supporting the aforementioned items. Thanks.