Closed nbouayad closed 11 months ago
I assume you are using "X-Carriage-modded(R2)__for_MK2(s)" with the extended arm to hit the switch? Is the
With the R3 cable-holder design the sleeve and zip-ties needs to be properly tightened around the cables. The cable should be within the geometry of the cable-holder.
You could try the MK2.5 version of the cable holder, gives some more space around the frame: https://github.com/prusa3d/Original-Prusa-i3/blob/MK2.5/Printed-Parts/stl/cable_holder.stl
(From Prusa MK2.5 assembly guide)
@lejo1512, thank you for your answer. Yes, I am using the modded R2 for MK2(s). I will try the MK2.5 version of the cable holder and come back to you. Kind regards,
@lejo1512, using the MK2.5 cable holder solved the situation!! Thanks again!
Hello, On a Prusa MK2,the extruder rear cables prevent the x-endstop to be pushed, as seen in the attached pictures :
What can be done??! Thanks,