search

BorisFR / rseries-open-control

Automatically exported from code.google.com/p/rseries-open-control
1 stars 0 forks source link

Revise wristmount design #3

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
Restart housing design with a clean state.
Overall bulk of wristmount needs to be reduced. Wristmount needs to be 
adjustable to any forearm size 

Some design considerations...
 - wristmount could house touchscreen only; arduino, controller shield and batteries to be housed in remote enclosure (possibly clipped to belt)
 - touchscreen could be mounted to inner wrist (opposite of a typical watch location)
 - wristmount should be easily secured using only one free hand

Original issue reported on code.google.com by joymonkey on 30 Mar 2012 at 4:42

GoogleCodeExporter commented 9 years ago

Original comment by joymonkey on 30 Mar 2012 at 4:56

GoogleCodeExporter commented 9 years ago 
Paul, I would recommend everything to be rather close together in one housing.

Original comment by michael....@mac.com on 6 Apr 2012 at 1:01

GoogleCodeExporter commented 9 years ago 
With wire connected nunchuck to the controller I have found that the placing of 
touchscreen on the driving-arm is vital. It is very easy to get un-wanted gyro 
inputs while turning wrist to see(or use) touchscreen.
When using the current design the screen either ends up on the inside or 
outside of the arm. Ideally it should sit in between, facing up...
One temporary/final solution is to go wireless nunchuck, another is to use 
TUSCEN approach and temporary disable the gyro inputs... or use both (as Micke 
is doing)

Original comment by lasse.si...@telia.com on 12 Apr 2013 at 6:20