Closed klavifon closed 1 year ago
Thanks for the reply. I’m on macos unfortunately. I will try to fix this issue on a Windows computer. Hope it works! Best regards, Ales
On Tue, 24 Jan 2023 at 00:09, Benedikt Kleiner @.***> wrote:
I am sorry, but this not a support forum. Your fc not broken. Check our docs https://docs.bosshobby.com/Troubleshooting/ or hop on our discord https://discord.gg/8StVhvB6Tm.
— Reply to this email directly, view it on GitHub https://github.com/BossHobby/QUICKSILVER/issues/77#issuecomment-1401130089, or unsubscribe https://github.com/notifications/unsubscribe-auth/AM54K42IJ3YMBAD4MTHYSNLWT4FRLANCNFSM6AAAAAAUEMU7AM . You are receiving this because you authored the thread.Message ID: @.***>
-- Aleš Ogrin
Hello,
yesterday I flashed a Quicksilver firmware on my Mobula 6. I was having trouble configuring it and decided to flash back to Betaflight. So today I decided I will try once more so I flashed it back to Quicksilver. Something went wrong during the flash procedure and now I can't put it in the DFU mode. I tried almost everything and I'm kinda hopeless to the point of getting myself a new FC. So when I'm in the QS configurator I plug a USB into FC and reset it to bootloader. In ports I select a COM port which says QUICKSILVER, choose connect and it resets in Bootloader. Than I select the FW and the target and click Flash. And there is no COM port to select in this step. So I presume it didn't go in the DFU mode after all. I'm using a Crazybee F4 (Flysky) with the ELRS EP2 RX on UART 1 so when my radio is turned on I get a solid light on the RX and a telemetry reading on my radio.
Please help because I'm becoming desperate. Thanks