BradleyKarkanen / dslrdashboard

Automatically exported from code.google.com/p/dslrdashboard
1 stars 0 forks source link

OpenWRT for V0.30.32_test4 does not save settings #204

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
What steps will reproduce the problem?
1. Change root/access password for router, change/create WIFI password
2. Reboot router or cycle power
3. The passwords were not saved

What is the expected output? What do you see instead?
I'm using v0.11 openwrt version from the google drive link, which works with 
V0.30.32_test4 version of DD, and everytime I change access or WIFI password, 
the changes are only applied for as long as I dont turn the router off. If I 
cycle power, every setting is reset to its default value (eg. no passwords 
whatsoever)

Original issue reported on code.google.com by grega.le...@gmail.com on 12 Feb 2014 at 8:29

GoogleCodeExporter commented 8 years ago
I have the same problem. Change of Wifi settings do not survive a power cycle. 

Original comment by nils.ko...@gmail.com on 16 Feb 2014 at 12:35

GoogleCodeExporter commented 8 years ago
Solved:
New versions of OpenWRT as well DD
https://drive.google.com/folderview?id=0BxMZ8XY3H2wiNmtrS0FtLTJxR1E&usp=sharing

Original comment by Babyloni...@gmail.com on 19 Feb 2014 at 10:15

GoogleCodeExporter commented 8 years ago
I can confirm that the problem with saving router settings is fixed. Issue 202 
however remains unsolved...

Original comment by grega.le...@gmail.com on 19 Feb 2014 at 1:13

GoogleCodeExporter commented 8 years ago
Sorry for late answer, my stupid fault not seeing there where more open issues 
(more pages).

Yes there was 'disk full' problem with the 0.11 firmware. In 0.12 I solved this.

Original comment by hub...@gmail.com on 25 Feb 2014 at 9:59