search

BreeeZe / rpos

Raspberry Pi Onvif Server
http://breeeze.github.io/rpos
MIT License
647 stars 147 forks source link

Milestone issue #62

Open tallerken opened 5 years ago

tallerken commented 5 years ago

Hi! New to both raspian and github here. Having some issues with getting my camera into Milestone. Have everything installed (?) according to readme, but can't get it to work. Shows up and is discovered with hardware and everything in Milestone, can also connect but shows "no video". Had a couple of blips with video when I look at recording, but unfortuneately cannot identify what exacly I did differently then. If anyone can help, highly appreciated.

This is what i get when node rpos.js (launching driver with modprobe first)

pi@raspberrypi:~/rpos $ Read IP address 10.0.212.200 from eth0 Manufacturer : RPOS Raspberry Pi Model : Model_PiZeroW_Revision_1.1 HardwareId : SerialNumber : 0000000005115329 FirmwareVersion : 2.0.4 Starting camera settings webserver on http://10.0.212.200:8081/ Binding DeviceService to http://10.0.212.200:8081/onvif/device_service Binding MediaService to http://10.0.212.200:8081/onvif/media_service Binding PTZService to http://10.0.212.200:8081/onvif/ptz_service Binding ImagingService to http://10.0.212.200:8081/onvif/imaging_service discovery_service started ptz_service started imaging_service started device_service started Starting Live555 rtsp server media_service started --LAST LINE, nothing more happens--

My rposConfig.json:

"NetworkAdapters" : ["awdl0","eth0", "wlan0", "en0"], "IpAddress" : "10.0.212.200", "ServicePort" : 8081, "Username" : "pi", "Password" : "xxxx", "RTSPAddress" : "", "//":"Normally left blank. Used to set RTSP Server Address", "RTSPPort" : 8554, "RTSPName" : "h264", "MulticastEnabled" : false, "RTSPMulticastName" : "h264m", "MulticastAddress" : "224.0.0.1", "MulticastPort" : "10001", "RTSPServer" : 2, "RtspServerComment" : "## Select RTSP Server > 1:RPOS RTSP Server 2:V4L2 RTSP Server by mpromonet (auto selected if MulticastEnabled=true)", "PTZDriver" : "none", "PTZDriverComment": "## valid values are none,tenx,pelcod,visca and pan-tilt-hat", "PTZOutput" : "none", "PTZOutputComment": "## values are none (eg Tenx), serial and tcp", "PTZSerialPort" : "/dev/ttyUSB0", "PTZSerialPortSettings" : { "baudRate":2400, "dataBits":8, "parity":"none", "stopBits":1 }, "PTZOutputURL": "127.0.0.1:9999", "PTZCameraAddress": 1, "DeviceInformation" : { "Manufacturer" : "Raspberry Pi", "Model" : "2 B", "HardwareId" : "" }, "logLevel" : 3, "logLevelComment": "## LogLevels are > 1:Error 2:Warning 3:Info 4:Debug", "logSoapCalls" : false }

pi@raspberrypi:~/rpos $ npm -v 6.7.0 pi@raspberrypi:~/rpos $ node -v v10.15.0

Camera: PiNoir, working fine with raspistill

EDIT: it is working with server alternative 1, but not mpromonet (2/3)

RogerHardiman commented 5 years ago

Thanks for letting me know it works with RTSP server 1. What version of Milestone are you running and which release?

RogerHardiman commented 5 years ago

Not had any more feedback on which version of Milestone is being used.

tallerken commented 5 years ago

Sorry for late response; 2017 R3

bgbigbrother commented 3 years ago

Tested with 2020 R1 and it work just fine