IP-Symcon (IPS) Modul für Fronius Inverter (Wechselrichter) und SmartMeter (Energiezähler) mit ModBus TCP Unterstützung (bspw. Galvo, Primo, Symo, Symo Hybrid,...).
16
stars
1
forks
source link
Strange values with a Fronius Primo and a Fronius smartmeter #5
I installed your code, changed the settings on the Fronius according to your advice (port 502 and float). The connection between IPS and Fronius works okay but I am getting the strangest values across (negative values, extremely great values, or nothing at all). The measured values go up and down. For example the hertz value (should be around 50Hrz) is zero or more than 200.000. The Amperage that is supplied is sometimes -4.9248566252377516e+32 Amp's. I have a Fronius Primo with a Fronius smart meter.
...
I tried it today and the 'Swap LSW/MSW' should be turned Off and than it works great. Thanks for this module!
source: https://www.symcon.de/forum/threads/42026-Modul-Fronius-Wechselrichter?p=409828#post409828
I installed your code, changed the settings on the Fronius according to your advice (port 502 and float). The connection between IPS and Fronius works okay but I am getting the strangest values across (negative values, extremely great values, or nothing at all). The measured values go up and down. For example the hertz value (should be around 50Hrz) is zero or more than 200.000. The Amperage that is supplied is sometimes -4.9248566252377516e+32 Amp's. I have a Fronius Primo with a Fronius smart meter.
...
I tried it today and the 'Swap LSW/MSW' should be turned Off and than it works great. Thanks for this module!
Thanks, Robert