increased the throttle by itselfs and flip over

[GoogleCodeExporter]

When taking off it increased the throttle by itself and than makes a flip over 
and crashed. 
It was in stabalized mode

Used the MegaPirateNg 2.8R3 used on a X650 frame

Original issue reported on code.google.com by voyager4...@gmail.com on 15 Jan 2013 at 6:04

[GoogleCodeExporter]

Same here also with a 660 Frame,
think that the pid values where too high for stabilized mode because i've very 
much power...

i will try pid tuning in acro mode and then in stab mode

Original comment by alexande...@gmail.com on 25 Jan 2013 at 6:33

[GoogleCodeExporter]

Hi.

I'm having the same issue.  All seems well on the test bench yet every time i 
try to fly it rev very aggressively and tries to flip.

I've reduced the PID setting way down and it's more docile to inputs but still 
does the aggressive throttle and flip when trying to fly

Any thoughts ?

Original comment by shan...@aol.com on 21 Feb 2013 at 6:48

[GoogleCodeExporter]

What I have done:
I have erease the Eprom in the Mission planner, can find this under Terminal. 
After that I compiled the 2.9R5 and do all settings in the MP from the start. 
This time everything works. I have flown for three times now and nothing goes 
wrong.

Original comment by voyager4...@gmail.com on 21 Feb 2013 at 7:02

[GoogleCodeExporter]

2.9R5  ? i can't see this in the down loads ?

Original comment by shan...@aol.com on 22 Feb 2013 at 1:25

[GoogleCodeExporter]

You can find it overhere:

http://www.multikopter.co.uk/forum/topic/890-megapirateng-29-r1/page__st__20

to erase the eprom
go to your terminal
type setup
then erase
turn off and on again your board

goodluck...:)

Original comment by voyager4...@gmail.com on 22 Feb 2013 at 1:31