Unknown command:"SET_DUAL_CARRIAGE_MODE" and "Must home axis first: 0.000 0.000 0.200 [0.000]

[scuba1976]

I updare klipper using this steps"https://github.com/Bully85/Sovol-SV04-Klipper#installation-on-an-existing-os" Now, when i try to print in dual mode it appears "Unknown command:"SET_DUAL_CARRIAGE_MODE" and "Must home axis first: 0.000 0.000 0.200 [0.000]" and the print don't start. can you help me? klippy.log

[Bully85]

You don't have the correct config files use this https://github.com/Bully85/Sovol-SV04-Klipper/releases/tag/1.0.1

[scuba1976]

I copied the file from config folder. I don't use original display. can you help me to put the correct config?

[Bully85]

config/Sv04-works-with origin-klipper

You need Macro cfg idex cfg and start end macro cfg

[scuba1976]

I copied all the config folder and file in printer data, but alwayes the same problem. could be a problem with old prusaslicer config?

[Bully85]

Yes you must change it too

[Bully85]

In the path is a text file with new start code

[scuba1976]

Thanks, now it works. I get still two message : Hyperlaps unknown and dgus_print_start error. can you help me any more?

[lucwuyts]

I think dgus_print_start is a command/macro to show something on the original display. dgus_print_end is in macros.cfg dgus_print_start and dgus_print_end is in start_end_macro.cfg

I removed this because i use a PAD7 as display. Original display is removed on my machine.

[Bully85]

You're right

[Bully85]

Thanks, now it works. I get still two message : Hyperlaps unknown and dgus_print_start error. can you help me any more?

Can you take a screenshot

[scuba1976]

Thanks

[scuba1976]

I got everything. Thanks to all

[Bully85]

Your welcome