ArchangeGabriel
commented
8 years ago Please past code using Markdown syntax (look at the way I edited your message).
Could you provide /var/log/Xorg.8.log?
Closed Innocent09a1 closed 8 years ago
ArchangeGabriel
commented
8 years ago Please past code using Markdown syntax (look at the way I edited your message).
Could you provide /var/log/Xorg.8.log?
Innocent09a1
commented
8 years ago /var/log/Xorg.8.log ah i figured out how to do the formate, and thank you so much for your reply.
[ 4623.135]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 4623.135] X Protocol Version 11, Revision 0
[ 4623.135] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 4623.135] Current Operating System: Linux parrot 4.1.8-parrot-amd64 #1 SMP Fri Sep 25 01:27:52 CEST 2015 x86_64
[ 4623.135] Kernel command line: BOOT_IMAGE=/vmlinuz-4.1.8-parrot-amd64 root=/dev/mapper/parrot--vg-root ro quiet
[ 4623.135] Build Date: 11 February 2015 12:32:02AM
[ 4623.135] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 4623.136] Current version of pixman: 0.32.6
[ 4623.136] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4623.136] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4623.136] (==) Log file: "/var/log/Xorg.8.log", Time: Thu Dec 31 02:11:06 2015
[ 4623.136] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 4623.136] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 4623.136] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4623.136] (==) ServerLayout "Layout0"
[ 4623.136] (==) No screen section available. Using defaults.
[ 4623.136] (**) |-->Screen "Default Screen Section" (0)
[ 4623.136] (**) | |-->Monitor "<default monitor>"
[ 4623.136] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 4623.137] (**) | |-->Device "DiscreteNvidia"
[ 4623.137] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4623.137] (**) Option "AutoAddDevices" "false"
[ 4623.137] (**) Option "AutoAddGPU" "false"
[ 4623.137] (**) Not automatically adding devices
[ 4623.137] (==) Automatically enabling devices
[ 4623.137] (**) Not automatically adding GPU devices
[ 4623.137] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 4623.137] Entry deleted from font path.
[ 4623.137] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 4623.137] (++) ModulePath set to "/usr/lib/nvidia,/usr/lib/xorg/modules"
[ 4623.137] (==) |-->Input Device "<default pointer>"
[ 4623.137] (==) |-->Input Device "<default keyboard>"
[ 4623.137] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 4623.137] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 4623.137] (II) Loader magic: 0x55f4450bad80
[ 4623.137] (II) Module ABI versions:
[ 4623.137] X.Org ANSI C Emulation: 0.4
[ 4623.137] X.Org Video Driver: 18.0
[ 4623.137] X.Org XInput driver : 21.0
[ 4623.137] X.Org Server Extension : 8.0
[ 4623.137] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4623.137] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4623.137] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 4623.140] (--) PCI:*(0:1:0:0) 10de:0de9:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 4623.140] (II) LoadModule: "glx"
[ 4623.140] (II) Loading /usr/lib/nvidia/libglx.so
[ 4623.153] (II) Module glx: vendor="NVIDIA Corporation"
[ 4623.153] compiled for 4.0.2, module version = 1.0.0
[ 4623.153] Module class: X.Org Server Extension
[ 4623.153] (II) NVIDIA GLX Module 340.96 Sun Nov 8 22:06:18 PST 2015
[ 4623.153] (II) LoadModule: "nvidia"
[ 4623.153] (II) Loading /usr/lib/nvidia/nvidia_drv.so
[ 4623.154] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4623.154] compiled for 4.0.2, module version = 1.0.0
[ 4623.154] Module class: X.Org Video Driver
[ 4623.154] (II) LoadModule: "mouse"
[ 4623.155] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 4623.155] (II) Module mouse: vendor="X.Org Foundation"
[ 4623.155] compiled for 1.16.1, module version = 1.9.1
[ 4623.155] Module class: X.Org XInput Driver
[ 4623.155] ABI class: X.Org XInput driver, version 21.0
[ 4623.155] (II) LoadModule: "kbd"
[ 4623.156] (WW) Warning, couldn't open module kbd
[ 4623.156] (II) UnloadModule: "kbd"
[ 4623.156] (II) Unloading kbd
[ 4623.156] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 4623.156] (II) NVIDIA dlloader X Driver 340.96 Sun Nov 8 21:46:28 PST 2015
[ 4623.156] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4623.156] (--) using VT number 7
[ 4623.156] (II) Loading sub module "fb"
[ 4623.156] (II) LoadModule: "fb"
[ 4623.156] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4623.156] (II) Module fb: vendor="X.Org Foundation"
[ 4623.156] compiled for 1.16.4, module version = 1.0.0
[ 4623.156] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4623.156] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 4623.156] (II) Loading sub module "wfb"
[ 4623.156] (II) LoadModule: "wfb"
[ 4623.156] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4623.156] (II) Module wfb: vendor="X.Org Foundation"
[ 4623.156] compiled for 1.16.4, module version = 1.0.0
[ 4623.156] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4623.156] (II) Loading sub module "ramdac"
[ 4623.156] (II) LoadModule: "ramdac"
[ 4623.156] (II) Module "ramdac" already built-in
[ 4623.157] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4623.157] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4623.157] (==) NVIDIA(0): RGB weight 888
[ 4623.157] (==) NVIDIA(0): Default visual is TrueColor
[ 4623.157] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4623.157] (**) NVIDIA(0): Option "NoLogo" "true"
[ 4623.157] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 4623.157] (**) NVIDIA(0): Option "UseEDID" "false"
[ 4623.157] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 4623.157] (**) NVIDIA(0): Enabling 2D acceleration
[ 4623.157] (**) NVIDIA(0): Ignoring EDIDs
[ 4623.157] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 4623.157] (**) NVIDIA(0): mode
[ 4623.264] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 4623.265] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630M (GF108) at PCI:1:0:0 (GPU-0)
[ 4623.265] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 4623.265] (--) NVIDIA(0): VideoBIOS: 70.08.a8.00.9a
[ 4623.265] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 4623.265] (--) NVIDIA(0): Valid display device(s) on GeForce GT 630M at PCI:1:0:0
[ 4623.265] (--) NVIDIA(0): none
[ 4623.265] (II) NVIDIA(0): Validated MetaModes:
[ 4623.265] (II) NVIDIA(0): "NULL"
[ 4623.265] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 4623.265] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 4623.265] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 4623.265] (--) Depth 24 pixmap format is 32 bpp
[ 4623.265] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 4623.265] (II) NVIDIA: access.
[ 4623.267] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 4623.267] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 4623.267] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 4623.267] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 4623.267] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 4623.267] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 4623.267] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 4623.267] (II) NVIDIA(0): Config Options in the README.
[ 4623.267] (II) NVIDIA(0): Setting mode "NULL"
[ 4623.278] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 4623.278] (==) NVIDIA(0): Backing store enabled
[ 4623.278] (==) NVIDIA(0): Silken mouse enabled
[ 4623.278] (==) NVIDIA(0): DPMS enabled
[ 4623.278] (II) Loading sub module "dri2"
[ 4623.278] (II) LoadModule: "dri2"
[ 4623.278] (II) Module "dri2" already built-in
[ 4623.278] (II) NVIDIA(0): [DRI2] Setup complete
[ 4623.278] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 4623.278] (--) RandR disabled
[ 4623.281] (II) SELinux: Disabled on system
[ 4623.281] (II) Initializing extension GLX
[ 4623.281] (II) Indirect GLX disabled.(II) Using input driver 'mouse' for '<default pointer>'
[ 4623.304] (**) Option "CorePointer" "on"
[ 4623.304] (**) <default pointer>: always reports core events
[ 4623.304] (WW) <default pointer>: No Device specified, looking for one...
[ 4623.356] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[ 4623.356] (--) <default pointer>: Device: "/dev/input/mice"
[ 4623.356] (==) <default pointer>: Protocol: "Auto"
[ 4623.356] (**) <default pointer>: always reports core events
[ 4623.356] (**) Option "Device" "/dev/input/mice"
[ 4623.409] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 4623.409] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 4623.409] (**) <default pointer>: Buttons: 9
[ 4623.409] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 4623.409] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 4623.409] (**) <default pointer>: (accel) acceleration profile 0
[ 4623.409] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 4623.409] (**) <default pointer>: (accel) acceleration threshold: 4
[ 4623.409] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[ 4623.702] (II) <default pointer>: ps2EnableDataReporting: succeeded
[ 4623.702] (II) LoadModule: "kbd"
[ 4623.702] (WW) Warning, couldn't open module kbd
[ 4623.702] (II) UnloadModule: "kbd"
[ 4623.702] (II) Unloading kbd
[ 4623.702] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 4623.702] (EE) No input driver matching `kbd'
[ 4623.704] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 4623.704] (II) AutoAddDevices is off - not adding device.
[ 4623.704] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 4623.704] (II) AutoAddDevices is off - not adding device.
[ 4623.705] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 4623.705] (II) AutoAddDevices is off - not adding device.
[ 4623.705] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 4623.705] (II) AutoAddDevices is off - not adding device.
[ 4623.705] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 4623.705] (II) AutoAddDevices is off - not adding device.
[ 4623.706] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 4623.706] (II) AutoAddDevices is off - not adding device.
[ 4623.706] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4623.706] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4623.706] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 4623.706] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 4623.706] (II) AutoAddDevices is off - not adding device.
[ 4623.707] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 4623.707] (II) AutoAddDevices is off - not adding device.
[ 4623.707] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 4623.707] (II) AutoAddDevices is off - not adding device.
[ 4623.707] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 4623.707] (II) AutoAddDevices is off - not adding device.
[ 4623.707] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
[ 4623.707] (II) AutoAddDevices is off - not adding device.
[ 4623.708] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 4623.708] (II) AutoAddDevices is off - not adding device.
[ 4623.708] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[ 4623.708] (II) AutoAddDevices is off - not adding device.
[ 4623.708] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 4623.708] (II) AutoAddDevices is off - not adding device.
[ 4623.708] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 4623.708] (II) AutoAddDevices is off - not adding device.
[ 4877.880] (II) UnloadModule: "mouse"
[ 4877.899] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 4877.899] (EE) Server terminated successfully (0). Closing log file.here is the log when i tried running optirun glxspheres64 Xorg.8.log
[ 7843.784]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 7843.785] X Protocol Version 11, Revision 0
[ 7843.785] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 7843.785] Current Operating System: Linux parrot 4.1.8-parrot-amd64 #1 SMP Fri Sep 25 01:27:52 CEST 2015 x86_64
[ 7843.785] Kernel command line: BOOT_IMAGE=/vmlinuz-4.1.8-parrot-amd64 root=/dev/mapper/parrot--vg-root ro quiet
[ 7843.785] Build Date: 11 February 2015 12:32:02AM
[ 7843.785] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 7843.785] Current version of pixman: 0.32.6
[ 7843.785] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7843.785] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7843.785] (==) Log file: "/var/log/Xorg.8.log", Time: Thu Dec 31 10:57:29 2015
[ 7843.785] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 7843.785] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 7843.785] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 7843.785] Parse error on line 5 of section InputClass in file /etc/bumblebee/xorg.conf.d/ bumblebee.conf
"" is not a valid keyword in this section.
[ 7843.785] (EE) Problem parsing the config file
[ 7843.785] (EE) Error parsing the config file
[ 7843.785] (EE)
Fatal server error:
[ 7843.785] (EE) no screens found(EE)
[ 7843.785] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 7843.785] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 7843.785] (EE)
[ 7843.785] (EE) Server terminated with error (1). Closing log file.
``This is quite weird, there is not serious error in the first log. However, the timestamps in all your logs differ so there is nothing related here.
So, two things:
/etc/bumblebee/xorg.conf.d/bumblebee.conf?sudo bumblebeed -vv in one terminal, then optirun -vv glxspheres64 in another, and then past both outputs, dmesg log and /var/log/Xorg.8.log?Thanks, will look at this tomorrow morning. ;)
Innocent09a1
commented
8 years ago Okay here's what I'm going to do, to make it easier on both of us. I'm reinstalling the os. Going to follow the guide on the debian website located here https://wiki.debian.org/Bumblebee Then do what you asked me in the other post On Dec 31, 2015 11:19 AM, "Bruno Pagani" notifications@github.com wrote:
This is quite weird, there is not serious error in the first log. However, the timestamps in all your logs differ so there is nothing related here.
So, two things:
1.
Can you provide content of /etc/bumblebee/xorg.conf.d/bumblebee.conf? 2.
Can you do the following things: reboot, stop bumblebeed daemon, run sudo bumblebeed -vv in one terminal, then optirun -vv glxspheres64 in another, and then past both outputs, dmesg log and /var/log/Xorg.8.log?
Thanks, will look at this tomorrow morning. ;)
— Reply to this email directly or view it on GitHub https://github.com/Bumblebee-Project/Bumblebee/issues/723#issuecomment-168216016 .
Innocent09a1
commented
8 years ago /etc/bumblebee/xorg.conf.d/bumblebee.conf, no such file, the bumblebee file is located in /etc/bumblebee along with the other ones such as xorg.conf.nouveau and xorg.conf.nvidia. only file in /etc/bumblebee/xorg.conf.d/ is an empty file called 10-dummy.conf
sudo bumblebeed -vv
┌─[root@parrot]─[~]
└──╼ #sudo bumblebeed -vv
[ 1019.090288] [DEBUG]Found card: 01:00.0 (discrete)
[ 1019.090332] [DEBUG]Found card: 00:02.0 (integrated)
[ 1019.090347] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 1019.090626] [INFO]Configured driver: nvidia
[ 1019.090652] [DEBUG]Skipping auto-detection, using configured driver 'nvidia'
[ 1019.090776] [DEBUG]Process /sbin/modprobe started, PID 1778.
[ 1019.090856] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[ 1019.092329] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 1019.092410] [DEBUG]bbswitch has been detected.
[ 1019.092426] [INFO]Switching method 'bbswitch' is available and will be used.
[ 1019.092439] [DEBUG]Active configuration:
[ 1019.092451] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 1019.092463] [DEBUG] X display: :8
[ 1019.092474] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
[ 1019.092487] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 1019.092498] [DEBUG] pidfile: /var/run/bumblebeed.pid
[ 1019.092509] [DEBUG] xorg.conf file: /etc/bumblebee/xorg.conf.nvidia
[ 1019.092521] [DEBUG] xorg.conf.d dir: /etc/bumblebee/xorg.conf.d
[ 1019.092533] [DEBUG] ModulePath: /usr/lib/nvidia,/usr/lib/xorg/modules
[ 1019.092545] [DEBUG] GID name: bumblebee
[ 1019.092556] [DEBUG] Power method: auto
[ 1019.092567] [DEBUG] Stop X on exit: 1
[ 1019.092579] [DEBUG] Driver: nvidia
[ 1019.092590] [DEBUG] Driver module: nvidia-current
[ 1019.092602] [DEBUG] Card shutdown state: 1
[ 1019.092726] [DEBUG]Process /sbin/modprobe started, PID 1779.
[ 1019.092806] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[ 1019.094173] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 1019.094215] [DEBUG]Configuration test passed.
[ 1019.094441] [INFO]bumblebeed 3.2.1 started
[ 1019.094615] [INFO]Switching dedicated card OFF [bbswitch]
[ 1019.111566] [INFO]Initialization completed - now handling client requests
[ 1029.657937] [DEBUG]Accepted new connection
[ 1029.683710] [INFO]Switching dedicated card ON [bbswitch]
[ 1029.914749] [INFO]Loading driver nvidia (module nvidia-current)
[ 1029.914975] [DEBUG]Process modprobe started, PID 1794.
[ 1030.106062] [DEBUG]Process with PID 1794 returned code 0
[ 1030.106214] [INFO]Starting X server on display :8.
[ 1030.106360] [DEBUG]Process Xorg started, PID 1800.
[ 1032.387919] [DEBUG][XORG] X.Org X Server 1.16.4
[ 1032.387947] [DEBUG][XORG] Release Date: 2014-12-20
[ 1032.387953] [DEBUG][XORG] X Protocol Version 11, Revision 0
[ 1032.387958] [DEBUG][XORG] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 1032.387963] [DEBUG][XORG] Current Operating System: Linux parrot 4.2.6-parrot-amd64 #1 SMP Wed Dec 30 18:33:08 CET 2015 x86_64
[ 1032.387968] [DEBUG][XORG] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.6-parrot-amd64 root=/dev/mapper/parrot--vg-root ro quiet
[ 1032.387973] [DEBUG][XORG] Build Date: 11 February 2015 12:32:02AM
[ 1032.387977] [DEBUG][XORG] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 1032.387982] [DEBUG][XORG] Current version of pixman: 0.32.6
[ 1032.387987] [DEBUG][XORG] Before reporting problems, check http://wiki.x.org
[ 1032.387992] [DEBUG][XORG] to make sure that you have the latest version.
[ 1032.387997] [DEBUG][XORG] Markers: (--) probed, (**) from config file, (==) default setting,
[ 1032.388002] [DEBUG][XORG] (++) from command line, (!!) notice, (II) informational,
[ 1032.388007] [DEBUG][XORG] (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1032.388012] [DEBUG][XORG] (==) Log file: "/var/log/Xorg.8.log", Time: Thu Dec 31 15:17:40 2015
[ 1032.388017] [DEBUG][XORG] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 1032.388021] [DEBUG][XORG] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 1032.388026] [DEBUG][XORG] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1032.388031] [DEBUG][XORG] (==) ServerLayout "Layout0"
[ 1032.388035] [DEBUG][XORG] (==) No screen section available. Using defaults.
[ 1032.388039] [DEBUG][XORG] (**) |-->Screen "Default Screen Section" (0)
[ 1032.388044] [DEBUG][XORG] (**) | |-->Monitor "<default monitor>"
[ 1032.388048] [DEBUG][XORG] (==) No device specified for screen "Default Screen Section".
[ 1032.388053] [DEBUG][XORG] Using the first device section listed.
[ 1032.388057] [DEBUG][XORG] (**) | |-->Device "DiscreteNvidia"
[ 1032.388062] [DEBUG][XORG] (==) No monitor specified for screen "Default Screen Section".
[ 1032.388066] [DEBUG][XORG] Using a default monitor configuration.
[ 1032.388070] [DEBUG][XORG] (**) Option "AutoAddDevices" "false"
[ 1032.388075] [DEBUG][XORG] (**) Option "AutoAddGPU" "false"
[ 1032.388079] [DEBUG][XORG] (**) Not automatically adding devices
[ 1032.388084] [DEBUG][XORG] (==) Automatically enabling devices
[ 1032.388088] [DEBUG][XORG] (**) Not automatically adding GPU devices
[ 1032.388093] [DEBUG][XORG] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 1032.388097] [DEBUG][XORG] Entry deleted from font path.
[ 1032.388102] [DEBUG][XORG] (==) FontPath set to:
[ 1032.388106] [DEBUG][XORG] /usr/share/fonts/X11/misc,
[ 1032.388110] [DEBUG][XORG] /usr/share/fonts/X11/100dpi/:unscaled,
[ 1032.388115] [DEBUG][XORG] /usr/share/fonts/X11/75dpi/:unscaled,
[ 1032.388119] [DEBUG][XORG] /usr/share/fonts/X11/Type1,
[ 1032.388124] [DEBUG][XORG] /usr/share/fonts/X11/100dpi,
[ 1032.388128] [DEBUG][XORG] /usr/share/fonts/X11/75dpi,
[ 1032.388133] [DEBUG][XORG] built-ins
[ 1032.388137] [DEBUG][XORG] (++) ModulePath set to "/usr/lib/nvidia,/usr/lib/xorg/modules"
[ 1032.388142] [DEBUG][XORG] (==) |-->Input Device "<default pointer>"
[ 1032.388146] [DEBUG][XORG] (==) |-->Input Device "<default keyboard>"
[ 1032.388151] [DEBUG][XORG] (==) The core pointer device wasn't specified explicitly in the layout.
[ 1032.388155] [DEBUG][XORG] Using the default mouse configuration.
[ 1032.388160] [DEBUG][XORG] (==) The core keyboard device wasn't specified explicitly in the layout.
[ 1032.388164] [DEBUG][XORG] Using the default keyboard configuration.
[ 1032.388169] [DEBUG][XORG] (II) Loader magic: 0x558c3ae5fd80
[ 1032.388173] [DEBUG][XORG] (II) Module ABI versions:
[ 1032.388177] [DEBUG][XORG] X.Org ANSI C Emulation: 0.4
[ 1032.388182] [DEBUG][XORG] X.Org Video Driver: 18.0
[ 1032.388187] [DEBUG][XORG] X.Org XInput driver : 21.0
[ 1032.388191] [DEBUG][XORG] X.Org Server Extension : 8.0
[ 1032.388195] [DEBUG][XORG] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 1032.388200] [DEBUG][XORG] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1032.388207] [ERROR][XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 1032.388213] [DEBUG][XORG] (--) PCI:*(0:1:0:0) 10de:0de9:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 1032.388219] [DEBUG][XORG] (II) LoadModule: "glx"
[ 1032.388223] [DEBUG][XORG] (II) Loading /usr/lib/nvidia/libglx.so
[ 1032.388227] [DEBUG][XORG] (II) Module glx: vendor="NVIDIA Corporation"
[ 1032.388231] [DEBUG][XORG] compiled for 4.0.2, module version = 1.0.0
[ 1032.388237] [DEBUG][XORG] Module class: X.Org Server Extension
[ 1032.388241] [DEBUG][XORG] (II) NVIDIA GLX Module 340.96 Sun Nov 8 22:06:18 PST 2015
[ 1032.388245] [DEBUG][XORG] (II) LoadModule: "nvidia"
[ 1032.388249] [DEBUG][XORG] (II) Loading /usr/lib/nvidia/nvidia_drv.so
[ 1032.388254] [DEBUG][XORG] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1032.388258] [DEBUG][XORG] compiled for 4.0.2, module version = 1.0.0
[ 1032.388262] [DEBUG][XORG] Module class: X.Org Video Driver
[ 1032.388267] [DEBUG][XORG] (II) LoadModule: "mouse"
[ 1032.388271] [DEBUG][XORG] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 1032.388275] [DEBUG][XORG] (II) Module mouse: vendor="X.Org Foundation"
[ 1032.388279] [DEBUG][XORG] compiled for 1.16.1, module version = 1.9.1
[ 1032.388284] [DEBUG][XORG] Module class: X.Org XInput Driver
[ 1032.388289] [DEBUG][XORG] ABI class: X.Org XInput driver, version 21.0
[ 1032.388293] [DEBUG][XORG] (II) LoadModule: "kbd"
[ 1032.388299] [DEBUG][XORG] (WW) Warning, couldn't open module kbd
[ 1032.388303] [DEBUG][XORG] (II) UnloadModule: "kbd"
[ 1032.388307] [DEBUG][XORG] (II) Unloading kbd
[ 1032.388311] [DEBUG][XORG] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 1032.388315] [DEBUG][XORG] (II) NVIDIA dlloader X Driver 340.96 Sun Nov 8 21:46:28 PST 2015
[ 1032.388319] [DEBUG][XORG] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1032.388324] [DEBUG][XORG] (--) using VT number 7
[ 1032.388328] [DEBUG][XORG] (II) Loading sub module "fb"
[ 1032.388332] [DEBUG][XORG] (II) LoadModule: "fb"
[ 1032.388336] [DEBUG][XORG] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1032.388342] [DEBUG][XORG] (II) Module fb: vendor="X.Org Foundation"
[ 1032.388346] [DEBUG][XORG] compiled for 1.16.4, module version = 1.0.0
[ 1032.388350] [DEBUG][XORG] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1032.388356] [WARN][XORG] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 1032.388360] [DEBUG][XORG] (II) Loading sub module "wfb"
[ 1032.388364] [DEBUG][XORG] (II) LoadModule: "wfb"
[ 1032.388368] [DEBUG][XORG] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 1032.388373] [DEBUG][XORG] (II) Module wfb: vendor="X.Org Foundation"
[ 1032.388377] [DEBUG][XORG] compiled for 1.16.4, module version = 1.0.0
[ 1032.388381] [DEBUG][XORG] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1032.388386] [DEBUG][XORG] (II) Loading sub module "ramdac"
[ 1032.388390] [DEBUG][XORG] (II) LoadModule: "ramdac"
[ 1032.388394] [DEBUG][XORG] (II) Module "ramdac" already built-in
[ 1032.388399] [DEBUG][XORG] (II) NVIDIA(0): Creating default Display subsection in Screen section
[ 1032.388403] [DEBUG][XORG] "Default Screen Section" for depth/fbbpp 24/32
[ 1032.388408] [DEBUG][XORG] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 1032.388412] [DEBUG][XORG] (==) NVIDIA(0): RGB weight 888
[ 1032.388416] [DEBUG][XORG] (==) NVIDIA(0): Default visual is TrueColor
[ 1032.388421] [DEBUG][XORG] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1032.388425] [DEBUG][XORG] (**) NVIDIA(0): Option "NoLogo" "true"
[ 1032.388429] [DEBUG][XORG] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 1032.388433] [DEBUG][XORG] (**) NVIDIA(0): Option "UseEDID" "false"
[ 1032.388437] [DEBUG][XORG] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 1032.388442] [DEBUG][XORG] (**) NVIDIA(0): Enabling 2D acceleration
[ 1032.388446] [DEBUG][XORG] (**) NVIDIA(0): Ignoring EDIDs
[ 1032.388451] [DEBUG][XORG] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 1032.388455] [DEBUG][XORG] (**) NVIDIA(0): mode
[ 1032.388459] [DEBUG][XORG] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 1032.388463] [DEBUG][XORG] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630M (GF108) at PCI:1:0:0 (GPU-0)
[ 1032.388468] [DEBUG][XORG] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 1032.388472] [DEBUG][XORG] (--) NVIDIA(0): VideoBIOS: 70.08.a8.00.9a
[ 1032.388476] [DEBUG][XORG] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 1032.388480] [DEBUG][XORG] (--) NVIDIA(0): Valid display device(s) on GeForce GT 630M at PCI:1:0:0
[ 1032.388485] [DEBUG][XORG] (--) NVIDIA(0): none
[ 1032.388489] [DEBUG][XORG] (II) NVIDIA(0): Validated MetaModes:
[ 1032.388494] [DEBUG][XORG] (II) NVIDIA(0): "NULL"
[ 1032.388498] [DEBUG][XORG] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 1032.388503] [WARN][XORG] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 1032.388508] [DEBUG][XORG] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 1032.388512] [DEBUG][XORG] (--) Depth 24 pixmap format is 32 bpp
[ 1032.388516] [DEBUG][XORG] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 1032.388521] [DEBUG][XORG] (II) NVIDIA: access.
[ 1032.388525] [DEBUG][XORG] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1032.388530] [DEBUG][XORG] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1032.388534] [DEBUG][XORG] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1032.388539] [DEBUG][XORG] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1032.388543] [DEBUG][XORG] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1032.388548] [DEBUG][XORG] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1032.388552] [DEBUG][XORG] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1032.388557] [DEBUG][XORG] (II) NVIDIA(0): Config Options in the README.
[ 1032.388562] [DEBUG][XORG] (II) NVIDIA(0): Setting mode "NULL"
[ 1032.388566] [DEBUG][XORG] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 1032.388570] [DEBUG][XORG] (==) NVIDIA(0): Backing store enabled
[ 1032.388574] [DEBUG][XORG] (==) NVIDIA(0): Silken mouse enabled
[ 1032.388579] [DEBUG][XORG] (==) NVIDIA(0): DPMS enabled
[ 1032.388583] [DEBUG][XORG] (II) Loading sub module "dri2"
[ 1032.388587] [DEBUG][XORG] (II) LoadModule: "dri2"
[ 1032.388591] [DEBUG][XORG] (II) Module "dri2" already built-in
[ 1032.388595] [DEBUG][XORG] (II) NVIDIA(0): [DRI2] Setup complete
[ 1032.388599] [DEBUG][XORG] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 1032.388603] [DEBUG][XORG] (--) RandR disabled
[ 1032.388607] [DEBUG][XORG] (II) SELinux: Disabled on system
[ 1032.388611] [DEBUG][XORG] (II) Initializing extension GLX
[ 1032.388616] [DEBUG][XORG] (II) Indirect GLX disabled.(II) Using input driver 'mouse' for '<default pointer>'
[ 1032.388621] [DEBUG][XORG] (**) Option "CorePointer" "on"
[ 1032.388625] [DEBUG][XORG] (**) <default pointer>: always reports core events
[ 1032.388629] [DEBUG][XORG] (WW) <default pointer>: No Device specified, looking for one...
[ 1032.388634] [DEBUG][XORG] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[ 1032.388642] [DEBUG][XORG] (--) <default pointer>: Device: "/dev/input/mice"
[ 1032.388647] [DEBUG][XORG] (==) <default pointer>: Protocol: "Auto"
[ 1032.388651] [DEBUG][XORG] (**) <default pointer>: always reports core events
[ 1032.388655] [DEBUG][XORG] (**) Option "Device" "/dev/input/mice"
[ 1032.388660] [DEBUG][XORG] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 1032.388664] [DEBUG][XORG] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 1032.388669] [DEBUG][XORG] (**) <default pointer>: Buttons: 9
[ 1032.388673] [DEBUG][XORG] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 1032.388678] [DEBUG][XORG] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 1032.388682] [DEBUG][XORG] (**) <default pointer>: (accel) acceleration profile 0
[ 1032.388686] [DEBUG][XORG] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 1032.388690] [DEBUG][XORG] (**) <default pointer>: (accel) acceleration threshold: 4
[ 1032.388697] [DEBUG][XORG] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[ 1032.388701] [DEBUG][XORG] (II) <default pointer>: ps2EnableDataReporting: succeeded
[ 1032.388706] [DEBUG][XORG] (II) LoadModule: "kbd"
[ 1032.388710] [DEBUG][XORG] (WW) Warning, couldn't open module kbd
[ 1032.388714] [DEBUG][XORG] (II) UnloadModule: "kbd"
[ 1032.388718] [DEBUG][XORG] (II) Unloading kbd
[ 1032.388722] [DEBUG][XORG] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 1032.388726] [DEBUG][XORG] (EE) No input driver matching `kbd'
[ 1032.388731] [DEBUG][XORG] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 1032.388735] [DEBUG][XORG] (II) AutoAddDevices is off - not adding device.
[ 1032.388740] [DEBUG][XORG] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 1032.388744] [DEBUG][XORG] (II) AutoAddDevices is off - not adding device.
[ 1032.388749] [DEBUG][XORG] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 1032.388754] [DEBUG][XORG] (II) AutoAddDevices is off - not adding device.
[ 1032.388758] [DEBUG][XORG] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 1032.388763] [DEBUG][XORG] (II) AutoAddDevices is off - not adding device.
[ 1032.388767] [DEBUG][XORG] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 1032.388771] [DEBUG][XORG] (II) AutoAddDevices is off - not adding device.
[ 1032.388776] [DEBUG][XORG] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 1032.388781] [DEBUG][XORG] (II) AutoAddDevices is off - not adding device.
[ 1032.388785] [DEBUG][XORG] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1032.388789] [DEBUG][XORG] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1032.388794] [ERROR][XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 1032.388799] [DEBUG][XORG] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 1032.388804] [DEBUG][XORG] (II) AutoAddDevices is off - not adding device.
[ 1032.388808] [DEBUG][XORG] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 1032.388813] [DEBUG][XORG] (II) AutoAddDevices is off - not adding device.
[ 1032.388817] [DEBUG][XORG] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 1032.388822] [DEBUG][XORG] (II) AutoAddDevices is off - not adding device.
[ 1032.388959] [DEBUG][XORG] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 1032.388974] [DEBUG][XORG] (II) AutoAddDevices is off - not adding device.
[ 1032.388980] [DEBUG][XORG] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
[ 1032.388987] [DEBUG][XORG] (II) AutoAddDevices is off - not adding device.
[ 1032.388997] [DEBUG][XORG] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1032.389005] [DEBUG][XORG] (II) AutoAddDevices is off - not adding device.
[ 1032.389011] [DEBUG][XORG] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[ 1032.389022] [DEBUG][XORG] (II) AutoAddDevices is off - not adding device.
[ 1032.389026] [DEBUG][XORG] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 1032.389030] [DEBUG][XORG] (II) AutoAddDevices is off - not adding device.
[ 1032.389034] [DEBUG][XORG] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 1032.389040] [DEBUG][XORG] (II) AutoAddDevices is off - not adding device.
[ 1032.389174] [INFO]X successfully started in 3 seconds
[ 1032.389890] [DEBUG]Socket closed.
[ 1032.389947] [INFO]Stopping X server
[ 1032.483826] [DEBUG]Process with PID 1800 returned code 0
[ 1032.483922] [INFO]Unloading nvidia driver
[ 1032.483997] [DEBUG]Process rmmod started, PID 1805.
[ 1032.510466] [DEBUG]Process with PID 1805 returned code 0
[ 1032.510710] [INFO]Switching dedicated card OFF [bbswitch]
[ 1032.526911] [DEBUG][XORG] (II) UnloadModule: "mouse"
[ 1032.526924] [DEBUG][XORG] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 1032.526930] [DEBUG][XORG] (EE) Server terminated successfully (0). Closing log file.optirun -vv glxspheres64:
┌─[root@parrot]─[~]
└──╼ #optirun -vv glxspheres64
[ 1029.657435] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 1029.657812] [INFO]Configured driver: nvidia
[ 1029.658017] [DEBUG]optirun version 3.2.1 starting...
[ 1029.658052] [DEBUG]Active configuration:
[ 1029.658066] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 1029.658080] [DEBUG] X display: :8
[ 1029.658094] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
[ 1029.658109] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 1029.658122] [DEBUG] Accel/display bridge: auto
[ 1029.658135] [DEBUG] VGL Compression: proxy
[ 1029.658148] [DEBUG] VGLrun extra options:
[ 1029.658161] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
[ 1029.683599] [DEBUG]Using auto-detected bridge primus
[ 1032.389208] [INFO]Response: Yes. X is active.
[ 1032.389223] [INFO]Running application using primus.
[ 1032.389434] [DEBUG]Process glxspheres64 started, PID 1803.
[ 1032.389606] [ERROR]Error running "glxspheres64": No such file or directory
[ 1032.389853] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 1032.389871] [DEBUG]Socket closed.
[ 1032.389891] [DEBUG]Killing all remaining processes.dmesg
┌─[root@parrot]─[~]
└──╼ #dmesg
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.6-parrot-amd64 (eclipse@parrot) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Wed Dec 30 18:33:08 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.2.6-parrot-amd64 root=/dev/mapper/parrot--vg-root ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000b3fecfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b3fed000-0x00000000b4d6dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b4d6e000-0x00000000b4daffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b4db0000-0x00000000b61affff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b61b0000-0x00000000baabefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000baabf000-0x00000000baebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baebf000-0x00000000bafbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bafbf000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20184/INVALID, BIOS 5ECN92WW(V8.04) 09/14/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x23f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0FF800000 mask FFF800000 write-protect
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask FC0000000 write-back
[ 0.000000] 7 base 23F600000 mask FFFE00000 uncachable
[ 0.000000] 8 base 23F800000 mask FFF800000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02207000, 0x02207fff] PGTABLE
[ 0.000000] BRK [0x02208000, 0x02208fff] PGTABLE
[ 0.000000] BRK [0x02209000, 0x02209fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23f400000-0x23f5fffff]
[ 0.000000] [mem 0x23f400000-0x23f5fffff] page 2M
[ 0.000000] BRK [0x0220a000, 0x0220afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23f3fffff]
[ 0.000000] [mem 0x220000000-0x23f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
[ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x0220b000, 0x0220bfff] PGTABLE
[ 0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xb3fecfff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xb3dfffff] page 2M
[ 0.000000] [mem 0xb3e00000-0xb3fecfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb4d6e000-0xb4daffff]
[ 0.000000] [mem 0xb4d6e000-0xb4daffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb61b0000-0xbaabefff]
[ 0.000000] [mem 0xb61b0000-0xb61fffff] page 4k
[ 0.000000] [mem 0xb6200000-0xba9fffff] page 2M
[ 0.000000] [mem 0xbaa00000-0xbaabefff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbafff000-0xbaffffff]
[ 0.000000] [mem 0xbafff000-0xbaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x34604000-0x362f9fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000BAFFE210 0000AC (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x00000000BAFFA000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x00000000BAFED000 009ECB (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x00000000BAFBB000 000040
[ 0.000000] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x00000000BAFFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x00000000BAFFB000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x00000000BAFF9000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x00000000BAFF8000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x00000000BAFF7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x00000000BAFEC000 0006FE (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x00000000BAFEA000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x00000000BAFE8000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x00000000BAFE7000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x00000000BAFE5000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x00000000BAFE4000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x00000000BAFE3000 0009AA (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x00000000BAFE2000 000A92 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DMAR 0x00000000BAFE1000 0000B8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x00000000BAFDE000 001EFA (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23f5e3000-0x23f5f5fff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236c00000-ffff88023ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.000000] node 0: [mem 0x0000000040005000-0x00000000b3fecfff]
[ 0.000000] node 0: [mem 0x00000000b4d6e000-0x00000000b4daffff]
[ 0.000000] node 0: [mem 0x00000000b61b0000-0x00000000baabefff]
[ 0.000000] node 0: [mem 0x00000000bafff000-0x00000000baffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000023f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023f5fffff]
[ 0.000000] On node 0 totalpages: 2063578
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11741 pages used for memmap
[ 0.000000] DMA32 zone: 751422 pages, LIFO batch:31
[ 0.000000] Normal zone: 20440 pages used for memmap
[ 0.000000] Normal zone: 1308160 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xbba00000-0xbf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb3fed000-0xb4d6dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb4db0000-0xb61affff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaabf000-0xbaebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaebf000-0xbafbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbafbf000-0xbaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[ 0.000000] e820: [mem 0xbfa00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88023f200000 s98200 r8192 d28776 u262144
[ 0.000000] pcpu-alloc: s98200 r8192 d28776 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2031312
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.6-parrot-amd64 root=/dev/mapper/parrot--vg-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8007540K/8254312K available (8481K kernel code, 1684K rwdata, 3596K rodata, 1480K init, 912K bss, 246772K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2893.241 MHz processor
[ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 5788.58 BogoMIPS (lpj=9644136)
[ 0.000030] pid_max: default: 32768 minimum: 301
[ 0.000036] ACPI: Core revision 20150619
[ 0.007402] ACPI: All ACPI Tables successfully acquired
[ 0.007422] Security Framework initialized
[ 0.007425] AppArmor: AppArmor disabled by boot time parameter
[ 0.007425] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.007853] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.009548] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010296] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.010304] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.010504] Initializing cgroup subsys blkio
[ 0.010506] Initializing cgroup subsys memory
[ 0.010511] Initializing cgroup subsys devices
[ 0.010513] Initializing cgroup subsys freezer
[ 0.010514] Initializing cgroup subsys net_cls
[ 0.010517] Initializing cgroup subsys perf_event
[ 0.010519] Initializing cgroup subsys net_prio
[ 0.010538] CPU: Physical Processor ID: 0
[ 0.010539] CPU: Processor Core ID: 0
[ 0.010543] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.010544] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.010850] mce: CPU supports 7 MCE banks
[ 0.010859] CPU0: Thermal monitoring enabled (TM1)
[ 0.010864] process: using mwait in idle threads
[ 0.010867] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.010867] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.011214] Freeing SMP alternatives memory: 36K (ffffffff82118000 - ffffffff82121000)
[ 0.026160] ftrace: allocating 31065 entries in 122 pages
[ 0.037470] DMAR: Host address width 36
[ 0.037472] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.037477] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.037479] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.037482] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.037483] DMAR: RMRR base: 0x000000bae8c000 end: 0x000000baeabfff
[ 0.037484] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff
[ 0.037486] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.037487] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.037488] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.037727] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.037729] x2apic enabled
[ 0.037734] Switched APIC routing to cluster x2apic.
[ 0.038186] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071201] TSC deadline timer enabled
[ 0.071204] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (fam: 06, model: 3a, stepping: 09)
[ 0.071229] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.071245] ... version: 3
[ 0.071246] ... bit width: 48
[ 0.071247] ... generic registers: 4
[ 0.071247] ... value mask: 0000ffffffffffff
[ 0.071248] ... max period: 0000ffffffffffff
[ 0.071249] ... fixed-purpose events: 3
[ 0.071249] ... event mask: 000000070000000f
[ 0.071746] x86: Booting SMP configuration:
[ 0.071748] .... node #0, CPUs: #1
[ 0.075267] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.075345] #2
[ 0.076660] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
[ 0.079147] #3
[ 0.082583] x86: Booted up 1 node, 4 CPUs
[ 0.082586] smpboot: Total of 4 processors activated (23155.34 BogoMIPS)
[ 0.085778] devtmpfs: initialized
[ 0.088084] PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes)
[ 0.088169] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.088237] xor: automatically using best checksumming function:
[ 0.119251] avx : 27080.400 MB/sec
[ 0.119259] pinctrl core: initialized pinctrl subsystem
[ 0.119373] NET: Registered protocol family 16
[ 0.132603] cpuidle: using governor ladder
[ 0.145946] cpuidle: using governor menu
[ 0.145993] Simple Boot Flag at 0x44 set to 0x1
[ 0.146048] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.146049] ACPI: bus type PCI registered
[ 0.146050] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.146119] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.146121] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.146126] PCI: Using configuration type 1 for base access
[ 0.146326] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.146329] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.146329] mtrr: probably your BIOS does not setup all CPUs.
[ 0.146330] mtrr: corrected configuration.
[ 0.212644] raid6: sse2x1 gen() 8010 MB/s
[ 0.269334] raid6: sse2x1 xor() 6551 MB/s
[ 0.326022] raid6: sse2x2 gen() 9933 MB/s
[ 0.382711] raid6: sse2x2 xor() 7180 MB/s
[ 0.439404] raid6: sse2x4 gen() 11688 MB/s
[ 0.496092] raid6: sse2x4 xor() 8749 MB/s
[ 0.496093] raid6: using algorithm sse2x4 gen() 11688 MB/s
[ 0.496093] raid6: .... xor() 8749 MB/s, rmw enabled
[ 0.496094] raid6: using ssse3x2 recovery algorithm
[ 0.496134] ACPI: Added _OSI(Module Device)
[ 0.496135] ACPI: Added _OSI(Processor Device)
[ 0.496136] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.496137] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.498328] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.500731] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.501086] ACPI: Dynamic OEM Table Load:
[ 0.501094] ACPI: SSDT 0xFFFF8802350E5000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20120111)
[ 0.501528] ACPI: Dynamic OEM Table Load:
[ 0.501534] ACPI: SSDT 0xFFFF8802350D8000 000303 (v01 PmRef ApIst 00003000 INTL 20120111)
[ 0.501912] ACPI: Dynamic OEM Table Load:
[ 0.501917] ACPI: SSDT 0xFFFF8802350E7E00 000119 (v01 PmRef ApCst 00003000 INTL 20120111)
[ 0.502644] ACPI : EC: EC started
[ 0.502745] ACPI: Interpreter enabled
[ 0.502750] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 0.502754] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.502768] ACPI: (supports S0 S3 S4 S5)
[ 0.502769] ACPI: Using IOAPIC for interrupt routing
[ 0.502789] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.606530] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.606535] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.606634] \_SB_.PCI0:_OSC invalid UUID
[ 0.606634] _OSC request data:1 1f 0
[ 0.606637] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.606986] PCI host bridge to bus 0000:00
[ 0.606988] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.606990] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.606991] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.606993] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.606994] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]
[ 0.607000] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.607069] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.607094] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.607123] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.607159] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.607170] pci 0000:00:02.0: reg 0x10: [mem 0xd3400000-0xd37fffff 64bit]
[ 0.607175] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.607180] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.607272] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.607300] pci 0000:00:14.0: reg 0x10: [mem 0xd3a00000-0xd3a0ffff 64bit]
[ 0.607353] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.607383] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.607419] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.607449] pci 0000:00:16.0: reg 0x10: [mem 0xd3a14000-0xd3a1400f 64bit]
[ 0.607506] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.607574] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.607601] pci 0000:00:1a.0: reg 0x10: [mem 0xd3a19000-0xd3a193ff]
[ 0.607665] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.607713] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.607749] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.607774] pci 0000:00:1b.0: reg 0x10: [mem 0xd3a10000-0xd3a13fff 64bit]
[ 0.607829] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.607861] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.607894] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.607961] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.608027] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.608092] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.608163] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.608189] pci 0000:00:1d.0: reg 0x10: [mem 0xd3a18000-0xd3a183ff]
[ 0.608253] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.608300] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.608335] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.608482] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.608504] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.608512] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.608519] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.608526] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.608532] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.608540] pci 0000:00:1f.2: reg 0x24: [mem 0xd3a17000-0xd3a177ff]
[ 0.608565] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.608622] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.608638] pci 0000:00:1f.3: reg 0x10: [mem 0xd3a15000-0xd3a150ff 64bit]
[ 0.608658] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.608766] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
[ 0.608780] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 0.608787] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.608794] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.608799] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.608804] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.608852] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.612871] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.612876] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.612880] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.612886] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.613024] pci 0000:02:00.0: [1969:1091] type 00 class 0x020000
[ 0.613239] pci 0000:02:00.0: reg 0x10: [mem 0xd3900000-0xd393ffff 64bit]
[ 0.613287] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
[ 0.613678] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.613773] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.619581] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.619602] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.619606] pci 0000:00:1c.0: bridge window [mem 0xd3900000-0xd39fffff]
[ 0.619714] pci 0000:03:00.0: [8086:0891] type 00 class 0x028000
[ 0.619800] pci 0000:03:00.0: reg 0x10: [mem 0xd3800000-0xd3801fff 64bit]
[ 0.619981] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.620016] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.626253] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.626277] pci 0000:00:1c.1: bridge window [mem 0xd3800000-0xd38fffff]
[ 0.676508] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.676550] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.676589] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.676629] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.676667] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.676707] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.676746] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.676784] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.676865] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.676893] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.676967] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.676969] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.676972] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.676973] vgaarb: loaded
[ 0.676974] vgaarb: bridge control possible 0000:01:00.0
[ 0.676975] vgaarb: no bridge control possible 0000:00:02.0
[ 0.677100] PCI: Using ACPI for IRQ routing
[ 0.678568] PCI: pci_cache_line_size set to 64 bytes
[ 0.678664] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.678666] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.678667] e820: reserve RAM buffer [mem 0xb3fed000-0xb3ffffff]
[ 0.678667] e820: reserve RAM buffer [mem 0xb4db0000-0xb7ffffff]
[ 0.678668] e820: reserve RAM buffer [mem 0xbaabf000-0xbbffffff]
[ 0.678670] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.678671] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
[ 0.678793] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.678797] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.680824] clocksource: Switched to clocksource hpet
[ 0.688427] pnp: PnP ACPI init
[ 0.688538] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.688540] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.688542] system 00:00: [io 0xffff] has been reserved
[ 0.688543] system 00:00: [io 0xffff] has been reserved
[ 0.688545] system 00:00: [io 0x0400-0x0453] could not be reserved
[ 0.688546] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.688548] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.688549] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.688551] system 00:00: [io 0xfd60-0xfd63] has been reserved
[ 0.688554] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.688579] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.688618] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.688620] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.688641] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.688687] pnp 00:04: Plug and Play ACPI device, IDs SYN0742 SYN0700 SYN0002 PNP0f13 (active)
[ 0.737659] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.737661] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.737662] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.737664] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.737665] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.737667] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.737668] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.737670] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[ 0.737671] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.737673] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.737674] system 00:05: [mem 0xbfa00000-0xbfa00fff] has been reserved
[ 0.737676] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.737950] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ 0.737951] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[ 0.737953] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.737965] pnp: PnP ACPI: found 7 devices
[ 0.744118] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.744123] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.744148] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3000000-0xd307ffff pref]
[ 0.744150] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.744151] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.744154] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.744156] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.744158] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.744161] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.744165] pci 0000:00:1c.0: bridge window [mem 0xd3900000-0xd39fffff]
[ 0.744179] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.744184] pci 0000:00:1c.1: bridge window [mem 0xd3800000-0xd38fffff]
[ 0.744193] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.744194] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.744195] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.744197] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff window]
[ 0.744198] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.744199] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.744200] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.744202] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.744203] pci_bus 0000:02: resource 1 [mem 0xd3900000-0xd39fffff]
[ 0.744205] pci_bus 0000:03: resource 1 [mem 0xd3800000-0xd38fffff]
[ 0.744262] NET: Registered protocol family 2
[ 0.744402] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.744521] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.744621] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.744642] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.744665] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.744747] NET: Registered protocol family 1
[ 0.744762] pci 0000:00:02.0: Video device with shadowed ROM
[ 2.077877] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.411565] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.411742] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 3.411777] PCI: CLS 64 bytes, default 64
[ 3.411817] Unpacking initramfs...
[ 3.809860] Freeing initrd memory: 29656K (ffff880034604000 - ffff8800362fa000)
[ 3.809903] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.809905] software IO TLB [mem 0xb6abf000-0xbaabf000] (64MB) mapped at [ffff8800b6abf000-ffff8800baabefff]
[ 3.809958] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 3.809959] hw unit of domain pp0-core 2^-16 Joules
[ 3.809960] hw unit of domain package 2^-16 Joules
[ 3.809961] hw unit of domain pp1-gpu 2^-16 Joules
[ 3.810064] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b
[ 3.810070] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b
[ 3.810079] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1b
[ 3.810086] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1b
[ 3.810132] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.810222] platform goldfish_pdev_bus: failed to claim resource 0
[ 3.810492] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 3.810527] audit: initializing netlink subsys (disabled)
[ 3.810541] audit: type=2000 audit(1451592033.796:1): initialized
[ 3.810871] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.810888] zpool: loaded
[ 3.810889] zbud: loaded
[ 3.811002] VFS: Disk quotas dquot_6.6.0
[ 3.811019] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.811146] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.811303] ntfs: driver 2.1.32 [Flags: R/W].
[ 3.811320] efs: 1.0a - http://aeschi.ch.eu.org/efs/
[ 3.811351] fuse init (API version 7.23)
[ 3.811408] JFS: nTxBlock = 8192, nTxLock = 65536
[ 3.812373] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 3.812522] befs: version: 0.9.3
[ 3.815160] async_tx: api initialized (async)
[ 3.815176] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 3.815203] io scheduler noop registered
[ 3.815205] io scheduler deadline registered
[ 3.815210] io scheduler cfq registered (default)
[ 3.815598] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.815604] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.815624] intel_idle: MWAIT substates: 0x21120
[ 3.815625] intel_idle: v0.4 model 0x3A
[ 3.815626] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.815791] GHES: HEST is not enabled!
[ 3.815848] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.816202] Linux agpgart interface v0.103
[ 3.816245] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 3.816246] AMD IOMMUv2 functionality not available on this system
[ 3.816274] Failed to find cpu0 device node
[ 3.816324] Unable to detect cache hierarchy from DT for CPU 0
[ 3.816374] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS3] at 0x60,0x64 irq 1,12
[ 3.831646] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.831650] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.831822] mousedev: PS/2 mouse device common for all mice
[ 3.833539] rtc_cmos 00:01: RTC can wake from S4
[ 3.833678] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 3.833705] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 3.833714] md: linear personality registered for level -1
[ 3.833716] md: raid0 personality registered for level 0
[ 3.833719] md: raid1 personality registered for level 1
[ 3.833722] md: raid10 personality registered for level 10
[ 3.833777] md: raid6 personality registered for level 6
[ 3.833778] md: raid5 personality registered for level 5
[ 3.833779] md: raid4 personality registered for level 4
[ 3.833782] md: multipath personality registered for level -4
[ 3.833825] device-mapper: uevent: version 1.0.3
[ 3.833894] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[ 3.833954] device-mapper: raid: Loading target version 1.7.0
[ 3.833959] Intel P-state driver initializing.
[ 3.834067] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.834889] NET: Registered protocol family 10
[ 3.835273] mip6: Mobile IPv6
[ 3.835281] NET: Registered protocol family 17
[ 3.835313] mpls_gso: MPLS GSO support
[ 3.836010] registered taskstats version 1
[ 3.836044] zswap: loading zswap
[ 3.836049] zswap: using zbud pool
[ 3.836053] zswap: using lzo compressor
[ 3.836490] Btrfs loaded
[ 3.839072] Key type encrypted registered
[ 3.839718] rtc_cmos 00:01: setting system clock to 2015-12-31 20:00:34 UTC (1451592034)
[ 3.839889] PM: Hibernation image not present or could not be loaded.
[ 3.840398] Freeing unused kernel memory: 1480K (ffffffff81fa6000 - ffffffff82118000)
[ 3.840401] Write protecting the kernel read-only data: 14336k
[ 3.841156] Freeing unused kernel memory: 1748K (ffff88000184b000 - ffff880001a00000)
[ 3.841402] Freeing unused kernel memory: 500K (ffff880001d83000 - ffff880001e00000)
[ 3.852409] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.875829] systemd-udevd[118]: starting version 215
[ 3.876144] random: systemd-udevd urandom read with 4 bits of entropy available
[ 3.881740] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
[ 3.881746] ACPI: Power Button [PWRB]
[ 3.881800] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input3
[ 3.881803] ACPI: Sleep Button [SLPB]
[ 3.881980] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 3.882019] ACPI: Lid Switch [LID0]
[ 3.882086] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 3.882088] ACPI: Power Button [PWRF]
[ 3.889771] ACPI: bus type USB registered
[ 3.889799] usbcore: registered new interface driver usbfs
[ 3.889811] usbcore: registered new interface driver hub
[ 3.889830] usbcore: registered new device driver usb
[ 3.891549] SCSI subsystem initialized
[ 3.891909] [drm] Initialized drm 1.1.0 20060810
[ 3.892158] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.892165] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 3.892966] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[ 3.892973] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.893492] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.893494] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.893496] usb usb1: Product: xHCI Host Controller
[ 3.893498] usb usb1: Manufacturer: Linux 4.2.6-parrot-amd64 xhci-hcd
[ 3.893499] usb usb1: SerialNumber: 0000:00:14.0
[ 3.893628] hub 1-0:1.0: USB hub found
[ 3.893646] hub 1-0:1.0: 4 ports detected
[ 3.894540] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.894543] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 3.894712] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.894714] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.894716] usb usb2: Product: xHCI Host Controller
[ 3.894718] usb usb2: Manufacturer: Linux 4.2.6-parrot-amd64 xhci-hcd
[ 3.894719] usb usb2: SerialNumber: 0000:00:14.0
[ 3.894830] hub 2-0:1.0: USB hub found
[ 3.894894] hub 2-0:1.0: 4 ports detected
[ 3.895690] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [b8:88:e3:87:9b:ca]
[ 3.896207] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.896391] ehci-pci: EHCI PCI platform driver
[ 3.896507] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.896515] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.896528] ehci-pci 0000:00:1a.0: debug port 2
[ 3.896742] libata version 3.00 loaded.
[ 3.898174] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.898178] ACPI: Thermal Zone [TZ00] (57 C)
[ 3.900440] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 3.900461] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd3a19000
[ 3.902605] AVX version of gcm_enc/dec engaged.
[ 3.902607] AES CTR mode by8 optimization enabled
[ 3.908373] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.908421] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.908424] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.908426] usb usb3: Product: EHCI Host Controller
[ 3.908428] usb usb3: Manufacturer: Linux 4.2.6-parrot-amd64 ehci_hcd
[ 3.908430] usb usb3: SerialNumber: 0000:00:1a.0
[ 3.908669] hub 3-0:1.0: USB hub found
[ 3.908677] hub 3-0:1.0: 2 ports detected
[ 3.909056] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.909063] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 3.909080] ehci-pci 0000:00:1d.0: debug port 2
[ 3.912986] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 3.913313] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd3a18000
[ 3.921708] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.921741] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.921742] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.921743] usb usb4: Product: EHCI Host Controller
[ 3.921744] usb usb4: Manufacturer: Linux 4.2.6-parrot-amd64 ehci_hcd
[ 3.921745] usb usb4: SerialNumber: 0000:00:1d.0
[ 3.921866] hub 4-0:1.0: USB hub found
[ 3.921873] hub 4-0:1.0: 2 ports detected
[ 3.921989] ahci 0000:00:1f.2: version 3.0
[ 3.922138] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 3.935056] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 3.935059] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 3.942396] scsi host0: ahci
[ 3.942490] scsi host1: ahci
[ 3.942570] scsi host2: ahci
[ 3.942639] scsi host3: ahci
[ 3.942708] scsi host4: ahci
[ 3.942774] scsi host5: ahci
[ 3.942807] ata1: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17100 irq 28
[ 3.942808] ata2: DUMMY
[ 3.942810] ata3: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17200 irq 28
[ 3.942811] ata4: DUMMY
[ 3.942812] ata5: DUMMY
[ 3.942812] ata6: DUMMY
[ 3.943281] [drm] Memory usable by graphics device = 2048M
[ 3.943283] [drm] Replacing VGA console driver
[ 3.943754] Console: switching to colour dummy device 80x25
[ 3.948409] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.948410] [drm] Driver supports precise vblank timestamp query.
[ 3.948501] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 3.955359] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 3.955467] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 3.955605] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input6
[ 3.956256] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.956340] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:03/input/input7
[ 3.956359] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
[ 3.978910] fbcon: inteldrmfb (fb0) is primary device
[ 4.011016] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 4.011045] [drm:cpt_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[ 4.027621] Console: switching to colour frame buffer device 160x64
[ 4.031848] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.031850] i915 0000:00:02.0: registered panic notifier
[ 4.215217] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 4.228535] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 4.261895] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.263435] ata1.00: ATA-8: HITACHI HTS541075A9E680, JA2ZB480, max UDMA/133
[ 4.263442] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.265157] ata1.00: configured for UDMA/133
[ 4.265513] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54107 B480 PQ: 0 ANSI: 5
[ 4.338945] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.338952] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.339500] hub 3-1:1.0: USB hub found
[ 4.339692] hub 3-1:1.0: 6 ports detected
[ 4.352590] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.352596] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.353182] hub 4-1:1.0: USB hub found
[ 4.353325] hub 4-1:1.0: 6 ports detected
[ 4.585315] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.590943] ata3.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
[ 4.591909] ata3.00: configured for UDMA/100
[ 4.599663] scsi 2:0:0:0: CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
[ 4.605305] usb 3-1.4: new high-speed USB device number 3 using ehci-pci
[ 4.617923] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 4.617931] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4.618062] sd 0:0:0:0: [sda] Write Protect is off
[ 4.618070] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.618115] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.634047] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/188x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.634053] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.634361] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.635489] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.635572] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 4.635943] sda: sda1 sda2 < sda5 >
[ 4.636599] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.689519] usb 3-1.4: New USB device found, idVendor=0bda, idProduct=0129
[ 4.689525] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.689529] usb 3-1.4: Product: USB2.0-CRW
[ 4.689532] usb 3-1.4: Manufacturer: Generic
[ 4.689534] usb 3-1.4: SerialNumber: 20100201396000000
[ 4.693333] usbcore: registered new interface driver rtsx_usb
[ 4.755294] usb 3-1.6: new full-speed USB device number 4 using ehci-pci
[ 4.808702] tsc: Refined TSC clocksource calibration: 2893.417 MHz
[ 4.808708] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b4f8b8941, max_idle_ns: 440795354489 ns
[ 4.842396] usb 3-1.6: New USB device found, idVendor=0489, idProduct=e042
[ 4.842402] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.842405] usb 3-1.6: Product: BCM20702A0
[ 4.842408] usb 3-1.6: Manufacturer: Broadcom Corp
[ 4.842410] usb 3-1.6: SerialNumber: 08EDB9D97D20
[ 5.809260] clocksource: Switched to clocksource tsc
[ 50.597609] random: nonblocking pool is initialized
[ 858.476366] NET: Registered protocol family 38
[ 867.639923] PM: Starting manual resume from disk
[ 867.639931] PM: Hibernation image partition 251:2 present
[ 867.639933] PM: Looking for hibernation image.
[ 867.640162] PM: Image not found (code -22)
[ 867.640167] PM: Hibernation image not present or could not be loaded.
[ 867.907038] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 871.782853] systemd-udevd[367]: starting version 215
[ 874.251026] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254)
[ 874.251033] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 874.251040] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[ 874.251043] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150619/utaddress-254)
[ 874.251046] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 874.251047] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[ 874.251051] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150619/utaddress-254)
[ 874.251054] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 874.251055] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[ 874.251059] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150619/utaddress-254)
[ 874.251062] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 874.251063] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 874.256110] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 874.330864] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405F conflicts with OpRegion 0x0000000000004040-0x000000000000404F (\_SB_.PCI0.SBUS.SMBI) (20150619/utaddress-254)
[ 874.330869] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 874.390716] ACPI: Battery Slot [BAT1] (battery present)
[ 874.417599] ACPI: AC Adapter [ACAD] (on-line)
[ 874.432397] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 874.491612] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input11
[ 874.776203] Intel(R) Wireless WiFi driver for Linux
[ 874.776207] Copyright(c) 2003- 2015 Intel Corporation
[ 874.776400] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 874.871108] iTCO_vendor_support: vendor-support=0
[ 874.998350] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 874.998403] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 874.998563] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 875.302578] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-2000-6.ucode
[ 875.302816] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 875.435296] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[ 875.435771] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 875.435775] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 875.435777] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[ 875.435780] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 875.435781] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 875.435784] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1b
[ 875.435787] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1a
[ 875.436944] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 875.505275] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 875.505281] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 875.505285] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 875.505289] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 2200 BGN, REV=0x104
[ 875.505435] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 875.530428] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 875.530715] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 875.530811] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 875.530924] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 875.574082] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4682]
[ 875.629398] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1172..]
[ 875.742536] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x123c00/0x0, board id: 1800, fw id: 1087391
[ 875.813753] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 876.101717] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 876.123085] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 876.417741] intel_rapl: Found RAPL domain package
[ 876.417748] intel_rapl: Found RAPL domain core
[ 876.417753] intel_rapl: Found RAPL domain uncore
[ 877.233751] cfg80211: World regulatory domain updated:
[ 877.233759] cfg80211: DFS Master region: unset
[ 877.233762] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 877.233767] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 877.233770] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 877.233773] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 877.233776] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 877.233780] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 877.233783] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 877.233786] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 877.233789] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 877.309004] Bluetooth: Core ver 2.20
[ 877.309030] NET: Registered protocol family 31
[ 877.309032] Bluetooth: HCI device and connection manager initialized
[ 877.309038] Bluetooth: HCI socket layer initialized
[ 877.309042] Bluetooth: L2CAP socket layer initialized
[ 877.309051] Bluetooth: SCO socket layer initialized
[ 877.425635] usbcore: registered new interface driver btusb
[ 877.430681] Bluetooth: hci0: BCM: chip id 63
[ 877.431704] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 877.455740] bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0489-e042.hcd (-2)
[ 877.455812] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0489-e042.hcd failed with error -2
[ 877.455819] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0489-e042.hcd not found
[ 878.454808] Adding 16510972k swap on /dev/mapper/parrot--vg-swap_1. Priority:-1 extents:1 across:16510972k FS
[ 879.109116] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 879.128254] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 880.117640] systemd-journald[381]: Received request to flush runtime journal from PID 1
[ 883.980013] Netfilter messages via NETLINK v0.30.
[ 884.482406] bbswitch: version 0.8
[ 884.482421] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 884.482430] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 884.482452] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 884.482596] bbswitch: detected an Optimus _DSM function
[ 884.482621] pci 0000:01:00.0: enabling device (0006 -> 0007)
[ 884.482707] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 884.485645] bbswitch: disabling discrete graphics
[ 884.485665] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 890.012124] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 890.012131] Bluetooth: BNEP filters: protocol multicast
[ 890.012149] Bluetooth: BNEP socket layer initialized
[ 892.773908] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 892.781506] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 893.033423] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 893.041009] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 894.730338] wlan0: authenticate with 00:1d:d5:56:80:20
[ 894.733951] wlan0: send auth to 00:1d:d5:56:80:20 (try 1/3)
[ 894.735921] wlan0: authenticated
[ 894.739410] wlan0: associate with 00:1d:d5:56:80:20 (try 1/3)
[ 894.755799] wlan0: RX AssocResp from 00:1d:d5:56:80:20 (capab=0xc11 status=0 aid=3)
[ 894.779278] wlan0: associated
[ 894.782476] cfg80211: Regulatory domain changed to country: US
[ 894.782481] cfg80211: DFS Master region: FCC
[ 894.782483] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 894.782486] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 894.782489] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 894.782491] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 894.782493] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 894.782495] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 1000.294168] bbswitch: enabling discrete graphics
[ 1019.373594] bbswitch: disabling discrete graphics
[ 1019.373613] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 1029.965455] bbswitch: enabling discrete graphics
[ 1030.372444] nvidia: module license 'NVIDIA' taints kernel.
[ 1030.372451] Disabling lock debugging due to kernel taint
[ 1030.387118] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 1030.387539] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 1
[ 1030.387549] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.96 Sun Nov 8 22:33:28 PST 2015
[ 1031.595649] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 1031.595703] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 1031.595726] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 1031.595765] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 1031.595786] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 1031.595806] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 1031.595855] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 1031.595876] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 1031.679132] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 1032.767029] [drm] Module unloaded
[ 1032.793203] bbswitch: disabling discrete graphics
[ 1032.793219] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 1032.805723] pci 0000:01:00.0: Refused to change power state, currently in D0/var/log/Xorg.8.log
[ 1030.129]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 1030.129] X Protocol Version 11, Revision 0
[ 1030.129] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 1030.129] Current Operating System: Linux parrot 4.2.6-parrot-amd64 #1 SMP Wed Dec 30 18:33:08 CET 2015 x86_64
[ 1030.129] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.6-parrot-amd64 root=/dev/mapper/parrot--vg-root ro quiet
[ 1030.129] Build Date: 11 February 2015 12:32:02AM
[ 1030.129] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 1030.129] Current version of pixman: 0.32.6
[ 1030.129] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1030.129] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1030.129] (==) Log file: "/var/log/Xorg.8.log", Time: Thu Dec 31 15:17:40 2015
[ 1030.130] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 1030.130] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 1030.130] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1030.149] (==) ServerLayout "Layout0"
[ 1030.149] (==) No screen section available. Using defaults.
[ 1030.149] (**) |-->Screen "Default Screen Section" (0)
[ 1030.149] (**) | |-->Monitor "<default monitor>"
[ 1030.149] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1030.149] (**) | |-->Device "DiscreteNvidia"
[ 1030.149] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1030.149] (**) Option "AutoAddDevices" "false"
[ 1030.149] (**) Option "AutoAddGPU" "false"
[ 1030.149] (**) Not automatically adding devices
[ 1030.149] (==) Automatically enabling devices
[ 1030.149] (**) Not automatically adding GPU devices
[ 1030.149] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 1030.149] Entry deleted from font path.
[ 1030.149] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 1030.149] (++) ModulePath set to "/usr/lib/nvidia,/usr/lib/xorg/modules"
[ 1030.149] (==) |-->Input Device "<default pointer>"
[ 1030.149] (==) |-->Input Device "<default keyboard>"
[ 1030.149] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 1030.149] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 1030.149] (II) Loader magic: 0x558c3ae5fd80
[ 1030.149] (II) Module ABI versions:
[ 1030.149] X.Org ANSI C Emulation: 0.4
[ 1030.149] X.Org Video Driver: 18.0
[ 1030.149] X.Org XInput driver : 21.0
[ 1030.149] X.Org Server Extension : 8.0
[ 1030.149] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 1030.149] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1030.149] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 1030.150] (--) PCI:*(0:1:0:0) 10de:0de9:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 1030.150] (II) LoadModule: "glx"
[ 1030.176] (II) Loading /usr/lib/nvidia/libglx.so
[ 1031.100] (II) Module glx: vendor="NVIDIA Corporation"
[ 1031.100] compiled for 4.0.2, module version = 1.0.0
[ 1031.100] Module class: X.Org Server Extension
[ 1031.109] (II) NVIDIA GLX Module 340.96 Sun Nov 8 22:06:18 PST 2015
[ 1031.119] (II) LoadModule: "nvidia"
[ 1031.119] (II) Loading /usr/lib/nvidia/nvidia_drv.so
[ 1031.194] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1031.194] compiled for 4.0.2, module version = 1.0.0
[ 1031.194] Module class: X.Org Video Driver
[ 1031.202] (II) LoadModule: "mouse"
[ 1031.202] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 1031.215] (II) Module mouse: vendor="X.Org Foundation"
[ 1031.215] compiled for 1.16.1, module version = 1.9.1
[ 1031.215] Module class: X.Org XInput Driver
[ 1031.215] ABI class: X.Org XInput driver, version 21.0
[ 1031.215] (II) LoadModule: "kbd"
[ 1031.228] (WW) Warning, couldn't open module kbd
[ 1031.228] (II) UnloadModule: "kbd"
[ 1031.228] (II) Unloading kbd
[ 1031.228] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 1031.228] (II) NVIDIA dlloader X Driver 340.96 Sun Nov 8 21:46:28 PST 2015
[ 1031.228] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1031.229] (--) using VT number 7
[ 1031.240] (II) Loading sub module "fb"
[ 1031.240] (II) LoadModule: "fb"
[ 1031.240] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1031.240] (II) Module fb: vendor="X.Org Foundation"
[ 1031.240] compiled for 1.16.4, module version = 1.0.0
[ 1031.240] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1031.240] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 1031.240] (II) Loading sub module "wfb"
[ 1031.240] (II) LoadModule: "wfb"
[ 1031.241] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 1031.253] (II) Module wfb: vendor="X.Org Foundation"
[ 1031.253] compiled for 1.16.4, module version = 1.0.0
[ 1031.253] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1031.253] (II) Loading sub module "ramdac"
[ 1031.253] (II) LoadModule: "ramdac"
[ 1031.253] (II) Module "ramdac" already built-in
[ 1031.280] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1031.280] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 1031.280] (==) NVIDIA(0): RGB weight 888
[ 1031.280] (==) NVIDIA(0): Default visual is TrueColor
[ 1031.280] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1031.280] (**) NVIDIA(0): Option "NoLogo" "true"
[ 1031.280] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 1031.280] (**) NVIDIA(0): Option "UseEDID" "false"
[ 1031.280] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 1031.282] (**) NVIDIA(0): Enabling 2D acceleration
[ 1031.282] (**) NVIDIA(0): Ignoring EDIDs
[ 1031.282] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 1031.282] (**) NVIDIA(0): mode
[ 1031.743] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 1031.762] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630M (GF108) at PCI:1:0:0 (GPU-0)
[ 1031.762] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 1031.762] (--) NVIDIA(0): VideoBIOS: 70.08.a8.00.9a
[ 1031.762] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 1031.762] (--) NVIDIA(0): Valid display device(s) on GeForce GT 630M at PCI:1:0:0
[ 1031.762] (--) NVIDIA(0): none
[ 1031.762] (II) NVIDIA(0): Validated MetaModes:
[ 1031.762] (II) NVIDIA(0): "NULL"
[ 1031.762] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 1031.762] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 1031.762] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 1031.762] (--) Depth 24 pixmap format is 32 bpp
[ 1031.762] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 1031.762] (II) NVIDIA: access.
[ 1031.767] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1031.767] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1031.767] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1031.767] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1031.767] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1031.767] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1031.767] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1031.767] (II) NVIDIA(0): Config Options in the README.
[ 1031.767] (II) NVIDIA(0): Setting mode "NULL"
[ 1031.804] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 1031.804] (==) NVIDIA(0): Backing store enabled
[ 1031.804] (==) NVIDIA(0): Silken mouse enabled
[ 1031.804] (==) NVIDIA(0): DPMS enabled
[ 1031.804] (II) Loading sub module "dri2"
[ 1031.804] (II) LoadModule: "dri2"
[ 1031.804] (II) Module "dri2" already built-in
[ 1031.804] (II) NVIDIA(0): [DRI2] Setup complete
[ 1031.804] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 1031.804] (--) RandR disabled
[ 1031.810] (II) SELinux: Disabled on system
[ 1031.810] (II) Initializing extension GLX
[ 1031.810] (II) Indirect GLX disabled.(II) Using input driver 'mouse' for '<default pointer>'
[ 1032.018] (**) Option "CorePointer" "on"
[ 1032.018] (**) <default pointer>: always reports core events
[ 1032.018] (WW) <default pointer>: No Device specified, looking for one...
[ 1032.053] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[ 1032.053] (--) <default pointer>: Device: "/dev/input/mice"
[ 1032.053] (==) <default pointer>: Protocol: "Auto"
[ 1032.053] (**) <default pointer>: always reports core events
[ 1032.053] (**) Option "Device" "/dev/input/mice"
[ 1032.083] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 1032.083] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 1032.083] (**) <default pointer>: Buttons: 9
[ 1032.083] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 1032.083] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 1032.083] (**) <default pointer>: (accel) acceleration profile 0
[ 1032.083] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 1032.083] (**) <default pointer>: (accel) acceleration threshold: 4
[ 1032.083] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[ 1032.375] (II) <default pointer>: ps2EnableDataReporting: succeeded
[ 1032.375] (II) LoadModule: "kbd"
[ 1032.375] (WW) Warning, couldn't open module kbd
[ 1032.375] (II) UnloadModule: "kbd"
[ 1032.375] (II) Unloading kbd
[ 1032.375] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 1032.375] (EE) No input driver matching `kbd'
[ 1032.377] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 1032.377] (II) AutoAddDevices is off - not adding device.
[ 1032.378] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 1032.378] (II) AutoAddDevices is off - not adding device.
[ 1032.378] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 1032.378] (II) AutoAddDevices is off - not adding device.
[ 1032.378] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 1032.378] (II) AutoAddDevices is off - not adding device.
[ 1032.379] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 1032.379] (II) AutoAddDevices is off - not adding device.
[ 1032.379] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 1032.379] (II) AutoAddDevices is off - not adding device.
[ 1032.379] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1032.379] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1032.379] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 1032.380] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 1032.380] (II) AutoAddDevices is off - not adding device.
[ 1032.380] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 1032.380] (II) AutoAddDevices is off - not adding device.
[ 1032.380] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 1032.380] (II) AutoAddDevices is off - not adding device.
[ 1032.381] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 1032.381] (II) AutoAddDevices is off - not adding device.
[ 1032.381] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
[ 1032.381] (II) AutoAddDevices is off - not adding device.
[ 1032.381] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1032.381] (II) AutoAddDevices is off - not adding device.
[ 1032.382] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[ 1032.382] (II) AutoAddDevices is off - not adding device.
[ 1032.382] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 1032.382] (II) AutoAddDevices is off - not adding device.
[ 1032.382] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 1032.382] (II) AutoAddDevices is off - not adding device.
[ 1032.449] (II) UnloadModule: "mouse"
[ 1032.482] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 1032.482] (EE) Server terminated successfully (0). Closing log file.What if you try optirun glxinfo? Your reinstall solved the issue you have because of a not expected /etc/bumblebee/xorg.conf.d/bumblebee.conf that you indeed do not have anymore, and the only error I see here is that glxspheres64 does not exist.
Innocent09a1
commented
8 years ago Yes it worked, I actually reinstalled twice and did the samething. But for some reason bumblebee isn't installing either glxgears(if it's spelled right) or glxspheres. I can do optirun with any program and it works no problem. Just trying to get it to install the other things with it. Not sure what else to try. I know the mesa package has them, but for some reason it just capps my fps rate. On Jan 1, 2016 3:28 PM, "Bruno Pagani" notifications@github.com wrote:
What if you try optirun glxinfo? Your reinstall solved the issue you have because of a not expected /etc/bumblebee/xorg.conf.d/bumblebee.conf that you indeed do not have anymore, and the only error I see here is that glxspheres64 does not exist.
— Reply to this email directly or view it on GitHub https://github.com/Bumblebee-Project/Bumblebee/issues/723#issuecomment-168335941 .
ArchangeGabriel
commented
8 years ago glxspheres is in the VirtualGL package, which does not exist in debian. glxgears and glxinfo are in a package called mesa-demo(s) generally.
On debian you’re using primus as the default backend, which means you are subject to vsync, read this: https://github.com/amonakov/primus#faq.
I’m closing this issue since everything seems OK.
I've been trying to get bumble bee working on my computer. tried googling all my issues and nothing worked. here are some information that might help you help me.
$ modprobe nvidia(no output)$ modprobe nvidia-uvm(no output)